WPA-EAP TLS can not connect from ubuntu but succeeded on windows 10

classic Classic list List threaded Threaded
7 messages Options
| Threaded
Open this post in threaded view
|

WPA-EAP TLS can not connect from ubuntu but succeeded on windows 10

Sunho Lee
Hello.

I am trying to test EAP-TLS configuration.
I want our robots can connect to any of our charging station's private
wifi with centralized authentication.
When i try to connect from ubuntu 16.04, the password entry dialog is
always popping up upon connection trials, (same as on ubuntu 18.04,
cent os 7)
but connected well from windows 10 and eapol_test succeeded on ubuntu.
What is the problem?
Any help would be appreciated.

>> Password entry dialog message
 Authentication required by wireless network
  Passwords or encryption keys are required to access the wireless network "xxx"
  Identity: [hidden email]
  Private key password: whatever

>> Network Configuration:
   FreeRadius <=> LTE Dongle - Wireless Router <= wifi (WPA2
Enterprise) => ubuntu 16.04
   [     EC2    ]         [         Charging Station            ]
                                           [Robot]

 - Server : FreeRadius  3.0.16 (ubuntu 18.04 LTS)
 - Router: TP link AC1200
 - Supplicant : Ubuntu 16.04 LTS,

>> Certificates
using "make" command In 'certs' folder

>> log (password entry dialog case):
ubuntu@ip-10-10-1-238:~$ sudo radiusd -X
FreeRADIUS Version 3.0.16
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/files
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/eap
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/default
main {
 security {
  user = "freerad"
  group = "freerad"
  allow_core_dumps = no
 }
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = no
 log {
  stripped_names = no
  auth = no
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
  max_attributes = 200
  reject_delay = 1.000000
  status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
radiusd: #### Loading Clients ####
 client localhost {
  ipaddr = 127.0.0.1
  require_message_authenticator = no
  secret = <<< secret >>>
  nas_type = "other"
  proto = "*"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client station-1 {
  ipaddr = 223.171.35.38
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client sunho-notebook {
  ipaddr = 211.171.128.253
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  realm IPASS {
  format = "prefix"
  delimiter = "/"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  realm suffix {
  format = "suffix"
  delimiter = "@"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
  realm realmpercent {
  format = "suffix"
  delimiter = "%"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  realm ntdomain {
  format = "prefix"
  delimiter = "\\"
  ignore_default = no
  ignore_null = no
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
  soh {
  dhcp = yes
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
  mschap {
  use_mppe = yes
  require_encryption = no
  require_strong = no
  with_ntdomain_hack = yes
   passchange {
   }
  allow_retry = yes
  winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
  passwd etc_passwd {
  filename = "/etc/passwd"
  format = "*User-Name:Crypt-Password:"
  delimiter = ":"
  ignore_nislike = no
  ignore_empty = yes
  allow_multiple_keys = no
  hash_size = 100
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file
/etc/freeradius/3.0/mods-enabled/replicate
  # Loaded module rlm_logintime
  # Loading module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
  logintime {
  minimum_timeout = 60
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
  radutmp {
  filename = "/var/log/freeradius/radutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 384
  caller_id = yes
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog {
  filename = "/var/log/freeradius/linelog"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = "This is a log message for %{User-Name}"
  reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
  linelog log_accounting {
  filename = "/var/log/freeradius/linelog-accounting"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = ""
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file
/etc/freeradius/3.0/mods-enabled/cache_eap
  cache cache_eap {
  driver = "rlm_cache_rbtree"
  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  ttl = 15
  max_entries = 0
  epoch = 0
  add_stats = no
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  always reject {
  rcode = "reject"
  simulcount = 0
  mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  always fail {
  rcode = "fail"
  simulcount = 0
  mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  always ok {
  rcode = "ok"
  simulcount = 0
  mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  always handled {
  rcode = "handled"
  simulcount = 0
  mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  always invalid {
  rcode = "invalid"
  simulcount = 0
  mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  always userlock {
  rcode = "userlock"
  simulcount = 0
  mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  always notfound {
  rcode = "notfound"
  simulcount = 0
  mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  always noop {
  rcode = "noop"
  simulcount = 0
  mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  always updated {
  rcode = "updated"
  simulcount = 0
  mpp = no
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
  # Loaded module rlm_expiration
  # Loading module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
  unix {
  radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
  # Loaded module rlm_exec
  # Loading module "ntlm_auth" from file
/etc/freeradius/3.0/mods-enabled/ntlm_auth
  exec ntlm_auth {
  wait = yes
  program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
  shell_escape = yes
  }
  # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
  exec echo {
  wait = yes
  program = "/bin/echo %{User-Name}"
  input_pairs = "request"
  output_pairs = "reply"
  shell_escape = yes
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
  expr {
  safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_detail
  # Loading module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail auth_log {
  filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail reply_log {
  filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail pre_proxy_log {
  filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail post_proxy_log {
  filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  pap {
  normalise = yes
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
  preprocess {
  huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
  hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
  with_ascend_hack = no
  ascend_channels_per_line = 23
  with_ntdomain_hack = no
  with_specialix_jetstream_hack = no
  with_cisco_vsa_hack = no
  with_alvarion_vsa_hack = no
  }
  # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  detail {
  filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
  # Loading module "sradutmp" from file
/etc/freeradius/3.0/mods-enabled/sradutmp
  radutmp sradutmp {
  filename = "/var/log/freeradius/sradutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 420
  caller_id = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
  # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
  exec {
  wait = no
  input_pairs = "request"
  shell_escape = yes
  timeout = 10
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
  eap {
  default_eap_type = "tls"
  timer_expire = 60
  ignore_unknown_eap_types = no
  cisco_accounting_username_bug = no
  max_sessions = 16384
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
  files {
  filename = "/etc/freeradius/3.0/mods-config/files/authorize"
  acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
  preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
  }
  instantiate {
  }
  # Instantiating module "IPASS" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "suffix" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
  # Instantiating module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check
item "FreeRADIUS-Response-Delay" found in filter list for realm
"DEFAULT".
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check
item "FreeRADIUS-Response-Delay-USec" found in filter list for realm
"DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/accounting_response
  # Instantiating module "cache_eap" from file
/etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module
rlm_cache_rbtree) loaded and linked
  # Instantiating module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "fail" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "noop" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
  # Instantiating module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  # Instantiating module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
  # Instantiating module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
  # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
   # Linked to sub-module rlm_eap_tls
   tls {
    tls = "tls-common"
   }
   tls-config tls-common {
    verify_depth = 0
    ca_path = "/etc/freeradius/3.0/certs"
    pem_file_type = yes
    private_key_file = "/etc/freeradius/3.0/certs/server.key"
    certificate_file = "/etc/freeradius/3.0/certs/server.crt"
    ca_file = "/etc/freeradius/3.0/certs/ca.pem"
    private_key_password = <<< secret >>>
    dh_file = "/etc/freeradius/3.0/certs/dh"
    fragment_size = 1024
    include_length = yes
    auto_chain = yes
    check_crl = no
    check_all_crl = no
    cipher_list = "DEFAULT"
    cipher_server_preference = no
    ecdh_curve = "prime256v1"
    tls_max_version = ""
    tls_min_version = "1.0"
    cache {
    enable = no
    lifetime = 24
    max_entries = 255
    }
    verify {
    skip_if_ocsp_ok = no
    }
    ocsp {
    enable = no
    override_cert_url = yes
    url = "http://127.0.0.1/ocsp/"
    use_nonce = yes
    timeout = 0
    softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
  # Instantiating module "files" from file
/etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server default { # from file /etc/freeradius/3.0/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
  type = "auth"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Ready to process requests
(0) Received Access-Request Id 1 from 223.171.35.38:6820 to
10.10.1.238:1812 length 145
(0)   User-Name = "[hidden email]"
(0)   NAS-IP-Address = 192.168.0.10
(0)   Called-Station-Id = "704f573b432b"
(0)   Calling-Station-Id = "00266645d5f9"
(0)   NAS-Identifier = "704f573b432b"
(0)   NAS-Port = 105
(0)   Framed-MTU = 1400
(0)   NAS-Port-Type = Wireless-802.11
(0)   EAP-Message = 0x020000150175736572406578616d706c652e6f7267
(0)   Message-Authenticator = 0x7cb7dbef28985f7dae3fc4d27c9f1091
(0) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: Looking up realm "example.org" for User-Name = "[hidden email]"
(0) suffix: No such realm "example.org"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 0 length 21
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit
the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_tls to process data
(0) eap_tls: Initiating new EAP-TLS session
(0) eap_tls: Setting verify mode to require certificate from client
(0) eap_tls: [eaptls start] = request
(0) eap: Sending EAP Request (code 1) ID 1 length 6
(0) eap: EAP session adding &reply:State = 0x203db85d203cb507
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 1 from 10.10.1.238:1812 to
223.171.35.38:6820 length 0
(0)   EAP-Message = 0x010100060d20
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x203db85d203cb507f96591a7e11a91ca
(0) Finished request
Waking up in 4.9 seconds.
(0) Cleaning up request packet ID 1 with timestamp +21
(1) Received Access-Request Id 1 from 223.171.35.38:6820 to
10.10.1.238:1812 length 320
(1)   User-Name = "[hidden email]"
(1)   NAS-IP-Address = 192.168.0.10
(1)   Called-Station-Id = "704f573b432b"
(1)   Calling-Station-Id = "00266645d5f9"
(1)   NAS-Identifier = "704f573b432b"
(1)   NAS-Port = 105
(1)   Framed-MTU = 1400
(1)   State = 0x203db85d203cb507f96591a7e11a91ca
(1)   NAS-Port-Type = Wireless-802.11
(1)   EAP-Message =
0x020100b20d0016030100a7010000a30303929fa29484d5b8f299850cd11dfce2f03149c1f2d7567abd6763a934ee658b78000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c0270067c00ac0140039c009c0130033009d009c003d003c0035002f00ff01000042000b0004030001
(1)   Message-Authenticator = 0xf676531d97de6df2673b533cc1b2f384
(1) session-state: No cached attributes
(1) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: Looking up realm "example.org" for User-Name = "[hidden email]"
(1) suffix: No such realm "example.org"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 1 length 178
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1)     [files] = noop
(1)     [expiration] = noop
(1)     [logintime] = noop
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0x203db85d203cb507
(1) eap: Finished EAP session with state 0x203db85d203cb507
(1) eap: Previous EAP request found for state 0x203db85d203cb507,
released from the list
(1) eap: Peer sent packet with method EAP TLS (13)
(1) eap: Calling submodule eap_tls to process data
(1) eap_tls: Continuing EAP-TLS
(1) eap_tls: Got final TLS record fragment (172 bytes)
(1) eap_tls: WARNING: Total received TLS record fragments (172 bytes),
does not equal indicated TLS record length (0 bytes)
(1) eap_tls: [eaptls verify] = ok
(1) eap_tls: Done initial handshake
(1) eap_tls: (other): before SSL initialization
(1) eap_tls: TLS_accept: before SSL initialization
(1) eap_tls: TLS_accept: before SSL initialization
(1) eap_tls: <<< recv TLS 1.2  [length 00a7]
(1) eap_tls: TLS_accept: SSLv3/TLS read client hello
(1) eap_tls: >>> send TLS 1.2  [length 003d]
(1) eap_tls: TLS_accept: SSLv3/TLS write server hello
(1) eap_tls: >>> send TLS 1.2  [length 0bd3]
(1) eap_tls: TLS_accept: SSLv3/TLS write certificate
(1) eap_tls: >>> send TLS 1.2  [length 014d]
(1) eap_tls: TLS_accept: SSLv3/TLS write key exchange
(1) eap_tls: >>> send TLS 1.2  [length 00c2]
(1) eap_tls: TLS_accept: SSLv3/TLS write certificate request
(1) eap_tls: >>> send TLS 1.2  [length 0004]
(1) eap_tls: TLS_accept: SSLv3/TLS write server done
(1) eap_tls: TLS_accept: Need to read more data: SSLv3/TLS write server done
(1) eap_tls: In SSL Handshake Phase
(1) eap_tls: In SSL Accept mode
(1) eap_tls: [eaptls process] = handled
(1) eap: Sending EAP Request (code 1) ID 2 length 1014
(1) eap: EAP session adding &reply:State = 0x203db85d213fb507
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 1 from 10.10.1.238:1812 to
223.171.35.38:6820 length 0
(1)   EAP-Message =
0x010203f60dc000000e3c160303003d02000039030378027514c9ef6433c7e832cce2ef4f3b624fa6271365982a446a8fb8e51dc8ca00c030000011ff01000100000b000403000102001700001603030bd30b000bcf000bcc0004de308204da308202c2a003020102020101300d06092a864886f70d0101
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x203db85d213fb507f96591a7e11a91ca
(1) Finished request
Waking up in 4.9 seconds.
(1) Cleaning up request packet ID 1 with timestamp +21
(2) Received Access-Request Id 1 from 223.171.35.38:6820 to
10.10.1.238:1812 length 148
(2)   User-Name = "[hidden email]"
(2)   NAS-IP-Address = 192.168.0.10
(2)   Called-Station-Id = "704f573b432b"
(2)   Calling-Station-Id = "00266645d5f9"
(2)   NAS-Identifier = "704f573b432b"
(2)   NAS-Port = 105
(2)   Framed-MTU = 1400
(2)   State = 0x203db85d213fb507f96591a7e11a91ca
(2)   NAS-Port-Type = Wireless-802.11
(2)   EAP-Message = 0x020200060d00
(2)   Message-Authenticator = 0x194e9ff186c1efce1d73cfac53b03359
(2) session-state: No cached attributes
(2) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: Looking up realm "example.org" for User-Name = "[hidden email]"
(2) suffix: No such realm "example.org"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 2 length 6
(2) eap: No EAP Start, assuming it's an on-going EAP conversation
(2)     [eap] = updated
(2)     [files] = noop
(2)     [expiration] = noop
(2)     [logintime] = noop
(2)     [pap] = noop
(2)   } # authorize = updated
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0x203db85d213fb507
(2) eap: Finished EAP session with state 0x203db85d213fb507
(2) eap: Previous EAP request found for state 0x203db85d213fb507,
released from the list
(2) eap: Peer sent packet with method EAP TLS (13)
(2) eap: Calling submodule eap_tls to process data
(2) eap_tls: Continuing EAP-TLS
(2) eap_tls: Peer ACKed our handshake fragment
(2) eap_tls: [eaptls verify] = request
(2) eap_tls: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 3 length 1014
(2) eap: EAP session adding &reply:State = 0x203db85d223eb507
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 1 from 10.10.1.238:1812 to
223.171.35.38:6820 length 0
(2)   EAP-Message =
0x010303f60dc000000e3c62da6c24d6b4cc2a815534cf52a3dc6119f546592d7f997683bdabd3869852f7c8d154a2e8211246c7d623fee8238c239d558ccea05e2339bd46ddb83336a8a5ee846e1bfaa61a03f0f140656fbcbfd9762b345e9c9b67d9c79002c95a6b963fbf22aedf8634d74a2b03a6f9b4
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x203db85d223eb507f96591a7e11a91ca
(2) Finished request
Waking up in 4.9 seconds.
(2) Cleaning up request packet ID 1 with timestamp +21
(3) Received Access-Request Id 1 from 223.171.35.38:6820 to
10.10.1.238:1812 length 148
(3)   User-Name = "[hidden email]"
(3)   NAS-IP-Address = 192.168.0.10
(3)   Called-Station-Id = "704f573b432b"
(3)   Calling-Station-Id = "00266645d5f9"
(3)   NAS-Identifier = "704f573b432b"
(3)   NAS-Port = 105
(3)   Framed-MTU = 1400
(3)   State = 0x203db85d223eb507f96591a7e11a91ca
(3)   NAS-Port-Type = Wireless-802.11
(3)   EAP-Message = 0x020300060d00
(3)   Message-Authenticator = 0x85f8ff9f5f4076652471f97e44644c7b
(3) session-state: No cached attributes
(3) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: Looking up realm "example.org" for User-Name = "[hidden email]"
(3) suffix: No such realm "example.org"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 3 length 6
(3) eap: No EAP Start, assuming it's an on-going EAP conversation
(3)     [eap] = updated
(3)     [files] = noop
(3)     [expiration] = noop
(3)     [logintime] = noop
(3)     [pap] = noop
(3)   } # authorize = updated
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0x203db85d223eb507
(3) eap: Finished EAP session with state 0x203db85d223eb507
(3) eap: Previous EAP request found for state 0x203db85d223eb507,
released from the list
(3) eap: Peer sent packet with method EAP TLS (13)
(3) eap: Calling submodule eap_tls to process data
(3) eap_tls: Continuing EAP-TLS
(3) eap_tls: Peer ACKed our handshake fragment
(3) eap_tls: [eaptls verify] = request
(3) eap_tls: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 4 length 1014
(3) eap: EAP session adding &reply:State = 0x203db85d2339b507
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 1 from 10.10.1.238:1812 to
223.171.35.38:6820 length 0
(3)   EAP-Message =
0x010403f60dc000000e3c786fed10a59ec759d78d22d762157a691ce1b46949b6b286ce1a2f630f6a52538243a46529a82525bb5e435a7c25c4f9bd57274db9bfdefb2394bdf9a3a1c0b5bc8efd93093507d3a6230110b342e84713cbd42bed4772bc370ebfb4754993a8bb04356bdddae41190f69eda35
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0x203db85d2339b507f96591a7e11a91ca
(3) Finished request
Waking up in 4.9 seconds.
(3) Cleaning up request packet ID 1 with timestamp +21
(4) Received Access-Request Id 1 from 223.171.35.38:6820 to
10.10.1.238:1812 length 148
(4)   User-Name = "[hidden email]"
(4)   NAS-IP-Address = 192.168.0.10
(4)   Called-Station-Id = "704f573b432b"
(4)   Calling-Station-Id = "00266645d5f9"
(4)   NAS-Identifier = "704f573b432b"
(4)   NAS-Port = 105
(4)   Framed-MTU = 1400
(4)   State = 0x203db85d2339b507f96591a7e11a91ca
(4)   NAS-Port-Type = Wireless-802.11
(4)   EAP-Message = 0x020400060d00
(4)   Message-Authenticator = 0xdda20d09b0b29e18eac85ecda72b7248
(4) session-state: No cached attributes
(4) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: Looking up realm "example.org" for User-Name = "[hidden email]"
(4) suffix: No such realm "example.org"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 4 length 6
(4) eap: No EAP Start, assuming it's an on-going EAP conversation
(4)     [eap] = updated
(4)     [files] = noop
(4)     [expiration] = noop
(4)     [logintime] = noop
(4)     [pap] = noop
(4)   } # authorize = updated
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0x203db85d2339b507
(4) eap: Finished EAP session with state 0x203db85d2339b507
(4) eap: Previous EAP request found for state 0x203db85d2339b507,
released from the list
(4) eap: Peer sent packet with method EAP TLS (13)
(4) eap: Calling submodule eap_tls to process data
(4) eap_tls: Continuing EAP-TLS
(4) eap_tls: Peer ACKed our handshake fragment
(4) eap_tls: [eaptls verify] = request
(4) eap_tls: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 5 length 642
(4) eap: EAP session adding &reply:State = 0x203db85d2438b507
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 1 from 10.10.1.238:1812 to
223.171.35.38:6820 length 0
(4)   EAP-Message =
0x010502820d8000000e3c71c6b50111980c295cf90e036e227db46ae622d3711ce48fc32e0a676f4ff6926904675fbdd650c39cafcc659b4a46fdf8dff8db5f24fce0c3247e045c15485106eb29012d1cb774b362063becd08942125c5b13edde160303014d0c0001490300174104cab9a9380bec6ab4e0
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x203db85d2438b507f96591a7e11a91ca
(4) Finished request
Waking up in 4.9 seconds.
(4) Cleaning up request packet ID 1 with timestamp +21
Ready to process requests
---->
Best regards,
Sun-ho Lee

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
| Threaded
Open this post in threaded view
|

Re: WPA-EAP TLS can not connect from ubuntu but succeeded on windows 10

Adam Bishop-2
On 9 Jan 2019, at 08:53, Sunho Lee <[hidden email]> wrote:
> When i try to connect from ubuntu 16.04, the password entry dialog is
> always popping up upon connection trials, (same as on ubuntu 18.04,
> cent os 7)

You've misconfigured your client. EAP-TLS doesn't use passwords.

Adam Bishop

  gpg: E75B 1F92 6407 DFDF 9F1C  BF10 C993 2504 6609 D460

jisc.ac.uk

Jisc is a registered charity (number 1149740) and a company limited by guarantee which is registered in England under Company No. 5747339, VAT No. GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, Bristol, BS2 0JA. T 0203 697 5800.

Jisc Services Limited is a wholly owned Jisc subsidiary and a company limited by guarantee which is registered in England under company number 2881024, VAT number GB 197 0632 86. The registered office is: One Castle Park, Tower Hill, Bristol BS2 0JA. T 0203 697 5800.  


-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
| Threaded
Open this post in threaded view
|

Re: WPA-EAP TLS can not connect from ubuntu but succeeded on windows 10

Sunho Lee
1. Before connection trial, i have created wifi connection using
Network Manager GUI as below:
- NetworkManager - Create Wifi Connection - Security Tab
   Security: WPA & WPA2 Enterprise
   Authentication: TLS
   Identity: [hidden email] (client.cnf default)
   User certificate: client.pem or client.p12
   CA certificate: ca.pem
   Private key: client.p12
   Private key password: whatever (client.cnf default)

2. Connection trial started and after my log was printed on radius
server, dialog like below was popped up
  Title: Authentication required by wireless network
  Contents:
   Passwords or encryption keys are required to access the wireless
network "xxx"
   Identity: [hidden email]
   Private key password: ********* (whatever?)
   [Cancel] [Connect]

3. I click the "connect" button (whether re-typing Private key password or not)
  then the above(#2) was repeated about 1~2 times


Best regards,
Sun-ho Lee

2019년 1월 9일 (수) 오후 7:57, Adam Bishop <[hidden email]>님이 작성:

>
> On 9 Jan 2019, at 08:53, Sunho Lee <[hidden email]> wrote:
> > When i try to connect from ubuntu 16.04, the password entry dialog is
> > always popping up upon connection trials, (same as on ubuntu 18.04,
> > cent os 7)
>
> You've misconfigured your client. EAP-TLS doesn't use passwords.
>
> Adam Bishop
>
>   gpg: E75B 1F92 6407 DFDF 9F1C  BF10 C993 2504 6609 D460
>
> jisc.ac.uk
>
> Jisc is a registered charity (number 1149740) and a company limited by guarantee which is registered in England under Company No. 5747339, VAT No. GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, Bristol, BS2 0JA. T 0203 697 5800.
>
> Jisc Services Limited is a wholly owned Jisc subsidiary and a company limited by guarantee which is registered in England under company number 2881024, VAT number GB 197 0632 86. The registered office is: One Castle Park, Tower Hill, Bristol BS2 0JA. T 0203 697 5800.
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
| Threaded
Open this post in threaded view
|

Re: WPA-EAP TLS can not connect from ubuntu but succeeded on windows 10

Alan DeKok-2
On Jan 9, 2019, at 7:46 AM, Sunho Lee <[hidden email]> wrote:

>
> 1. Before connection trial, i have created wifi connection using
> Network Manager GUI as below:
> - NetworkManager - Create Wifi Connection - Security Tab
>   Security: WPA & WPA2 Enterprise
>   Authentication: TLS
>   Identity: [hidden email] (client.cnf default)
>   User certificate: client.pem or client.p12
>   CA certificate: ca.pem
>   Private key: client.p12
>   Private key password: whatever (client.cnf default)
>
> 2. Connection trial started and after my log was printed on radius
> server, dialog like below was popped up
>  Title: Authentication required by wireless network
>  Contents:
>   Passwords or encryption keys are required to access the wireless
> network "xxx"
>   Identity: [hidden email]
>   Private key password: ********* (whatever?)

  This is the password to the client.pem file.

>   [Cancel] [Connect]
>
> 3. I click the "connect" button (whether re-typing Private key password or not)
>  then the above(#2) was repeated about 1~2 times

  Well, there isn't much we can do.  The problem isn't FreeRADIUS.  It's on the client side.  You'll have to ask the Network Manager people how their software works.

  Alan DeKok.


-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
| Threaded
Open this post in threaded view
|

Re: WPA-EAP TLS can not connect from ubuntu but succeeded on windows 10

Alan Buxey
run a debug when connecting from either from windows or eapol_test and
check for any difference in output.

alan

On Wed, 9 Jan 2019 at 12:52, Alan DeKok <[hidden email]> wrote:

> On Jan 9, 2019, at 7:46 AM, Sunho Lee <[hidden email]> wrote:
> >
> > 1. Before connection trial, i have created wifi connection using
> > Network Manager GUI as below:
> > - NetworkManager - Create Wifi Connection - Security Tab
> >   Security: WPA & WPA2 Enterprise
> >   Authentication: TLS
> >   Identity: [hidden email] (client.cnf default)
> >   User certificate: client.pem or client.p12
> >   CA certificate: ca.pem
> >   Private key: client.p12
> >   Private key password: whatever (client.cnf default)
> >
> > 2. Connection trial started and after my log was printed on radius
> > server, dialog like below was popped up
> >  Title: Authentication required by wireless network
> >  Contents:
> >   Passwords or encryption keys are required to access the wireless
> > network "xxx"
> >   Identity: [hidden email]
> >   Private key password: ********* (whatever?)
>
>   This is the password to the client.pem file.
>
> >   [Cancel] [Connect]
> >
> > 3. I click the "connect" button (whether re-typing Private key password
> or not)
> >  then the above(#2) was repeated about 1~2 times
>
>   Well, there isn't much we can do.  The problem isn't FreeRADIUS.  It's
> on the client side.  You'll have to ask the Network Manager people how
> their software works.
>
>   Alan DeKok.
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
| Threaded
Open this post in threaded view
|

Re: WPA-EAP TLS can not connect from ubuntu but succeeded on windows 10

Sunho Lee
Here is the differences.

1.  line 755
- Fail(Ubuntu Supplicant)
(1) eap_tls: Continuing EAP-TLS
(1) eap_tls: Got final TLS record fragment (172 bytes)
(1) eap_tls: WARNING: Total received TLS record fragments (172 bytes),
does not equal indicated TLS record length (0 bytes)
(1) eap_tls: [eaptls verify] = ok
(1) eap_tls: Done initial handshake
(1) eap_tls: (other): before SSL initialization

- Success(Win10 Supplicant)
(1) eap_tls: Continuing EAP-TLS
(1) eap_tls: Peer indicated complete TLS record size will be 156 bytes
(1) eap_tls: Got complete TLS record (156 bytes)
(1) eap_tls: [eaptls verify] = length included
(1) eap_tls: (other): before SSL initialization

2. line 1016~
- Fail(Ubuntu Supplicant)
..Cleaning up request .... After that, nothing more happens.

- Success(Win10 Supplicant)
(4) Cleaning up request packet ID 0 with timestamp +11
(5) Received Access-Request Id 0 from 223.171.35.38:6820 to
10.10.1.238:1812 length 1644
(5)   User-Name = "[hidden email]"
(5)   NAS-IP-Address = 192.168.0.10
(5)   Called-Station-Id = "704f573b432b"
(5)   Calling-Station-Id = "701ce7ea7851"
(5)   NAS-Identifier = "704f573b432b"
(5)   NAS-Port = 67
(5)   Framed-MTU = 1400
(5)   State = 0x8e60f0b08a65fd23980d5523ba0ace4e
(5)   NAS-Port-Type = Wireless-802.11
(5)   EAP-Message =
0x020505d40dc000000863160303082b0b0005d90005d60005d3308205cf308203b7a003020102020102300d06092a864886f70d01010b0500308193310b3009060355040613024652310f300d06035504080c065261646975733112301006035504070c09536f6d65776865726531153013060355040a0c
(5)   Message-Authenticator = 0xdc7992ea8fa49c9e68d4a1c633b8e72a
(5) session-state: No cached attributes
(5) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: Looking up realm "example.org" for User-Name = "[hidden email]"
(5) suffix: No such realm "example.org"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 5 length 1492
(5) eap: No EAP Start, assuming it's an on-going EAP conversation
(5)     [eap] = updated
(5)     [files] = noop
(5)     [expiration] = noop
(5)     [logintime] = noop
(5)     [pap] = noop
(5)   } # authorize = updated
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0x8e60f0b08a65fd23
(5) eap: Finished EAP session with state 0x8e60f0b08a65fd23
(5) eap: Previous EAP request found for state 0x8e60f0b08a65fd23,
released from the list
(5) eap: Peer sent packet with method EAP TLS (13)
(5) eap: Calling submodule eap_tls to process data
(5) eap_tls: Continuing EAP-TLS
(5) eap_tls: Peer indicated complete TLS record size will be 2147 bytes
(5) eap_tls: Expecting 2 TLS record fragments
(5) eap_tls: Got first TLS record fragment (1482 bytes).  Peer
indicated more fragments to follow
(5) eap_tls: [eaptls verify] = first fragment
(5) eap_tls: ACKing Peer's TLS record fragment
(5) eap_tls: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 6 length 6
(5) eap: EAP session adding &reply:State = 0x8e60f0b08b66fd23
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 0 from 10.10.1.238:1812 to
223.171.35.38:6820 length 0
(5)   EAP-Message = 0x010600060d00
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x8e60f0b08b66fd23980d5523ba0ace4e
(5) Finished request
Waking up in 4.9 seconds.
(5) Cleaning up request packet ID 0 with timestamp +12
(6) Received Access-Request Id 0 from 223.171.35.38:6820 to
10.10.1.238:1812 length 817
(6)   User-Name = "[hidden email]"
(6)   NAS-IP-Address = 192.168.0.10
(6)   Called-Station-Id = "704f573b432b"
(6)   Calling-Station-Id = "701ce7ea7851"
(6)   NAS-Identifier = "704f573b432b"
(6)   NAS-Port = 67
(6)   Framed-MTU = 1400
(6)   State = 0x8e60f0b08b66fd23980d5523ba0ace4e
(6)   NAS-Port-Type = Wireless-802.11
(6)   EAP-Message =
0x0206029f0d00a06ba6d17bb2b23af5592f7869f3944354812009850aa10a1000004241040621ae2eeb0e919d182c58c1a0b6418597140a8126dfb072d53a71a3aedc4f5bb694102ce204a9feabf416d66b3d1774c9b0008f8e29b7e3604c92229068d59d0f00020404010200986749316e430239a36533
(6)   Message-Authenticator = 0x26d43af12e94d7f008ff4f11f2778327
(6) session-state: No cached attributes
(6) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(6)   authorize {
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = notfound
(6)     } # policy filter_username = notfound
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: Looking up realm "example.org" for User-Name = "[hidden email]"
(6) suffix: No such realm "example.org"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 6 length 671
(6) eap: No EAP Start, assuming it's an on-going EAP conversation
(6)     [eap] = updated
(6)     [files] = noop
(6)     [expiration] = noop
(6)     [logintime] = noop
(6)     [pap] = noop
(6)   } # authorize = updated
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0x8e60f0b08b66fd23
(6) eap: Finished EAP session with state 0x8e60f0b08b66fd23
(6) eap: Previous EAP request found for state 0x8e60f0b08b66fd23,
released from the list
(6) eap: Peer sent packet with method EAP TLS (13)
(6) eap: Calling submodule eap_tls to process data
(6) eap_tls: Continuing EAP-TLS
(6) eap_tls: Got final TLS record fragment (665 bytes)
(6) eap_tls: [eaptls verify] = ok
(6) eap_tls: Done initial handshake
(6) eap_tls: TLS_accept: SSLv3/TLS write server done
(6) eap_tls: <<< recv TLS 1.2  [length 05dd]
(6) eap_tls: Creating attributes from certificate OIDs
(6) eap_tls:   TLS-Cert-Serial := "9b8908b10ad4e429"
(6) eap_tls:   TLS-Cert-Expiration := "240107092124Z"
(6) eap_tls:   TLS-Cert-Subject :=
"/C=FR/ST=Radius/L=Somewhere/O=Example
Inc./emailAddress=[hidden email]/CN=Example Certificate Authority"
(6) eap_tls:   TLS-Cert-Issuer :=
"/C=FR/ST=Radius/L=Somewhere/O=Example
Inc./emailAddress=[hidden email]/CN=Example Certificate Authority"
(6) eap_tls:   TLS-Cert-Common-Name := "Example Certificate Authority"
(6) eap_tls: Creating attributes from certificate OIDs
(6) eap_tls:   TLS-Client-Cert-Serial := "02"
(6) eap_tls:   TLS-Client-Cert-Expiration := "200108092126Z"
(6) eap_tls:   TLS-Client-Cert-Subject := "/C=FR/ST=Radius/O=Example
Inc./CN=[hidden email]/emailAddress=[hidden email]"
(6) eap_tls:   TLS-Client-Cert-Issuer :=
"/C=FR/ST=Radius/L=Somewhere/O=Example
Inc./emailAddress=[hidden email]/CN=Example Certificate Authority"
(6) eap_tls:   TLS-Client-Cert-Common-Name := "[hidden email]"
(6) eap_tls:   TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web
Client Authentication"
(6) eap_tls: TLS_accept: SSLv3/TLS read client certificate
(6) eap_tls: <<< recv TLS 1.2  [length 0046]
(6) eap_tls: TLS_accept: SSLv3/TLS read client key exchange
(6) eap_tls: <<< recv TLS 1.2  [length 0208]
(6) eap_tls: TLS_accept: SSLv3/TLS read certificate verify
(6) eap_tls: TLS_accept: SSLv3/TLS read change cipher spec
(6) eap_tls: <<< recv TLS 1.2  [length 0010]
(6) eap_tls: TLS_accept: SSLv3/TLS read finished
(6) eap_tls: >>> send TLS 1.2  [length 0001]
(6) eap_tls: TLS_accept: SSLv3/TLS write change cipher spec
(6) eap_tls: >>> send TLS 1.2  [length 0010]
(6) eap_tls: TLS_accept: SSLv3/TLS write finished
(6) eap_tls: (other): SSL negotiation finished successfully
(6) eap_tls: SSL Connection Established
(6) eap_tls: [eaptls process] = handled
(6) eap: Sending EAP Request (code 1) ID 7 length 61
(6) eap: EAP session adding &reply:State = 0x8e60f0b08867fd23
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6)   Challenge { ... } # empty sub-section is ignored
(6) Sent Access-Challenge Id 0 from 10.10.1.238:1812 to
223.171.35.38:6820 length 0
(6)   EAP-Message =
0x0107003d0d800000003314030300010116030300281e6973755166a35a1fdc4433b72897e6f4492a9e36844c22d602e69b19ce4d21245dd0780f1ddd8e
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0x8e60f0b08867fd23980d5523ba0ace4e
(6) Finished request
Waking up in 4.9 seconds.
(6) Cleaning up request packet ID 0 with timestamp +12
(7) Received Access-Request Id 0 from 223.171.35.38:6820 to
10.10.1.238:1812 length 148
(7)   User-Name = "[hidden email]"
(7)   NAS-IP-Address = 192.168.0.10
(7)   Called-Station-Id = "704f573b432b"
(7)   Calling-Station-Id = "701ce7ea7851"
(7)   NAS-Identifier = "704f573b432b"
(7)   NAS-Port = 67
(7)   Framed-MTU = 1400
(7)   State = 0x8e60f0b08867fd23980d5523ba0ace4e
(7)   NAS-Port-Type = Wireless-802.11
(7)   EAP-Message = 0x020700060d00
(7)   Message-Authenticator = 0x35a41bd0f2f81394fee838c720f96214
(7) session-state: No cached attributes
(7) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(7)   authorize {
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ / /) {
(7)         if (&User-Name =~ / /)  -> FALSE
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = notfound
(7)     } # policy filter_username = notfound
(7)     [preprocess] = ok
(7)     [chap] = noop
(7)     [mschap] = noop
(7)     [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: Looking up realm "example.org" for User-Name = "[hidden email]"
(7) suffix: No such realm "example.org"
(7)     [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 7 length 6
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7)     [eap] = updated
(7)     [files] = noop
(7)     [expiration] = noop
(7)     [logintime] = noop
(7)     [pap] = noop
(7)   } # authorize = updated
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7)   authenticate {
(7) eap: Expiring EAP session with state 0x8e60f0b08867fd23
(7) eap: Finished EAP session with state 0x8e60f0b08867fd23
(7) eap: Previous EAP request found for state 0x8e60f0b08867fd23,
released from the list
(7) eap: Peer sent packet with method EAP TLS (13)
(7) eap: Calling submodule eap_tls to process data
(7) eap_tls: Continuing EAP-TLS
(7) eap_tls: Peer ACKed our handshake fragment.  handshake is finished
(7) eap_tls: [eaptls verify] = success
(7) eap_tls: [eaptls process] = success
(7) eap: Sending EAP Success (code 3) ID 7 length 4
(7) eap: Freeing handler
(7)     [eap] = ok
(7)   } # authenticate = ok
(7) # Executing section post-auth from file
/etc/freeradius/3.0/sites-enabled/default
(7)   post-auth {
(7)     update {
(7)       No attributes updated
(7)     } # update = noop
(7)     [exec] = noop
(7)     policy remove_reply_message_if_eap {
(7)       if (&reply:EAP-Message && &reply:Reply-Message) {
(7)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(7)       else {
(7)         [noop] = noop
(7)       } # else = noop
(7)     } # policy remove_reply_message_if_eap = noop
(7)   } # post-auth = noop
(7) Sent Access-Accept Id 0 from 10.10.1.238:1812 to 223.171.35.38:6820 length 0
(7)   MS-MPPE-Recv-Key =
0x6851bd68488149beb6175757297429d2c5fbf2ba7fb9745df4f2803ddc2b8b6f
(7)   MS-MPPE-Send-Key =
0x115def9e214dd9a1c76bd12f4f31bfafc118723403846d253703224b9b334733
(7)   EAP-Message = 0x03070004
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   User-Name = "[hidden email]"
(7) Finished request
Waking up in 4.9 seconds.
(7) Cleaning up request packet ID 0 with timestamp +12
Ready to process requests

2019년 1월 10일 (목) 오전 5:07, Alan Buxey <[hidden email]>님이 작성:

>
> run a debug when connecting from either from windows or eapol_test and
> check for any difference in output.
>
> alan
>
> On Wed, 9 Jan 2019 at 12:52, Alan DeKok <[hidden email]> wrote:
>
> > On Jan 9, 2019, at 7:46 AM, Sunho Lee <[hidden email]> wrote:
> > >
> > > 1. Before connection trial, i have created wifi connection using
> > > Network Manager GUI as below:
> > > - NetworkManager - Create Wifi Connection - Security Tab
> > >   Security: WPA & WPA2 Enterprise
> > >   Authentication: TLS
> > >   Identity: [hidden email] (client.cnf default)
> > >   User certificate: client.pem or client.p12
> > >   CA certificate: ca.pem
> > >   Private key: client.p12
> > >   Private key password: whatever (client.cnf default)
> > >
> > > 2. Connection trial started and after my log was printed on radius
> > > server, dialog like below was popped up
> > >  Title: Authentication required by wireless network
> > >  Contents:
> > >   Passwords or encryption keys are required to access the wireless
> > > network "xxx"
> > >   Identity: [hidden email]
> > >   Private key password: ********* (whatever?)
> >
> >   This is the password to the client.pem file.
> >
> > >   [Cancel] [Connect]
> > >
> > > 3. I click the "connect" button (whether re-typing Private key password
> > or not)
> > >  then the above(#2) was repeated about 1~2 times
> >
> >   Well, there isn't much we can do.  The problem isn't FreeRADIUS.  It's
> > on the client side.  You'll have to ask the Network Manager people how
> > their software works.
> >
> >   Alan DeKok.
> >
> >
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html


--
(주)원익로보틱스

연구개발팀 과장  이 선 호

(13486)경기도 성남시 분당구 판교로255번길 20 원익빌딩 5층

T: 031-8038-9175  M:010-9871-7173 F: 031-8038-9190

www.wonikrobotics.com

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

log_success_win10.txt (74K) Download Attachment
log_fail_ubuntu.txt (57K) Download Attachment
| Threaded
Open this post in threaded view
|

Re: WPA-EAP TLS can not connect from ubuntu but succeeded on windows 10

Alan DeKok-2
On Jan 9, 2019, at 7:51 PM, Sunho Lee <[hidden email]> wrote:
> 2. line 1016~
> - Fail(Ubuntu Supplicant)
> ..Cleaning up request .... After that, nothing more happens.

  Because the Ubuntu supplicant decides that it doesn't want to continue authenticating.

  You have to look at the supplicant logs to see what's going on.  We can't help you with that.  This isn't a FreeRADIUS problem.

  Alan DeKok.


-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html