Virtual server pre-proxy section not executed for proxied authentication on v3.0.18 and above

classic Classic list List threaded Threaded
4 messages Options
| Threaded
Open this post in threaded view
|

Virtual server pre-proxy section not executed for proxied authentication on v3.0.18 and above

paul.moser
I've been attempting to upgrade some FreeRadius servers that have been following the v3.0.x line. Normally taking the existing running configuration from one minor version and applying to the next has just worked, however attempting to go from 3.0.17 to 3.0.18 (or 3.0.19 or the latest head) and it appears that the pre-proxy section of a virtual server isn't called when proxying authentication requests and the packet is sent straight to the remote radius server. Nothing in the change log or proxy.conf etc jumps out at me as indicating a deliberate change in this area.

I can reproduce the problem by applying a minimal realm/home_server_pool/home_server/virtual server combination to an out-of-the-box new install of each version so I don't think it is caused by carrying over some old/incompatible configuration from an old version, however it's quite possible my understanding of how proxying is suppose to work is wrong and my configuration worked by accident rather than design and later versions have tightened up the behaviour.

Two full outputs from radiusd -X included at end of the email.

An a minimal example to reproduce the problem to proxy.conf I've added:

home_server example_home_server {
  ipaddr = 1.2.3.4
  port = 1812
  secret = password
}

home_server_pool example_home_server_pool {
  home_server = example_home_server
  virtual_server = example-virtual-server
}

realm example.net {
  auth_pool = example_home_server_pool
}

And added a file to sites-enabled with:

server example-virtual-server {
  pre-proxy {
    # just as a simple example of something that could be done here, would normally add/modify attributes
    reject
  }
}

Up to and including 3.0.17 I see the authorize section completes and then the pre-proxy section get called and, with my simple example, a reject gets sent back to the client:

(0)     [pap] = noop
(0)   } # authorize = updated
(0) server example-virtual-server {
(0)   # Executing section pre-proxy from file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/example-virtual-server
(0)     pre-proxy {
(0)       [reject] = reject
(0)     } # pre-proxy = reject
(0) }


However on 3.0.18 and above it goes straight from completing the authorize section to sending the packet to the remote radius server. It does appear to know about the virtual server as on failure to proxy the request it looks for a Post-Proxy-Type Fail-Authentication in the virtual server

(0)     [pap] = noop
(0)   } # authorize = updated
(0) Starting proxy to home server 1.2.3.4 port 1812
(0) Proxying request to home server 1.2.3.4 port 1812 timeout 30.000000
(0) Sent Access-Request Id 182 from 0.0.0.0:40399 to 1.2.3.4:1812 length 117
(0)   User-Name = "fred"
(0)   Calling-Station-Id = "11-22-33-44-55-66"

(snip)

(0) ERROR: Failing proxied request for user "fred", due to lack of any response from home server 1.2.3.4 port 1812
(0) Clearing existing &reply: attributes
(0) Found Post-Proxy-Type Fail-Authentication
(0) server example-virtual-server {
(0)   Post-Proxy-Type sub-section not found.  Ignoring.
(0) }




Full log from 3.0.17:

FreeRADIUS Version 3.0.17
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /opt/freeradius-server-3.0.17/share/freeradius/dictionary
including dictionary file /opt/freeradius-server-3.0.17/share/freeradius/dictionary.dhcp
including dictionary file /opt/freeradius-server-3.0.17/share/freeradius/dictionary.vqp
including dictionary file /opt/freeradius-server-3.0.17/etc/raddb/dictionary
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/radiusd.conf
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/proxy.conf
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/clients.conf
including files in directory /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/chap
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/unix
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/sradutmp
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/soh
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/realm
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/pap
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/eap
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/linelog
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/passwd
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail.log
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/mschap
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/replicate
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/utf8
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/expr
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/expiration
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/radutmp
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/cache_eap
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/digest
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/unpack
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/files
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/date
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/ntlm_auth
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/exec
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/echo
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/logintime
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/preprocess
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/dynamic_clients
including files in directory /opt/freeradius-server-3.0.17/etc/raddb/policy.d/
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/eap
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/dhcp
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/canonicalization
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/accounting
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/filter
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/control
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/cui
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/abfab-tr
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/operator-name
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/debug
including files in directory /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/inner-tunnel
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/default
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/example-virtual-server
main {
    name = "radiusd"
    prefix = "/opt/freeradius-server-3.0.17"
    localstatedir = "/opt/freeradius-server-3.0.17/var"
    sbindir = "/opt/freeradius-server-3.0.17/sbin"
    logdir = "/opt/freeradius-server-3.0.17/var/log/radius"
    run_dir = "/opt/freeradius-server-3.0.17/var/run/radiusd"
    libdir = "/opt/freeradius-server-3.0.17/lib"
    radacctdir = "/opt/freeradius-server-3.0.17/var/log/radius/radacct"
    hostname_lookups = no
    max_request_time = 30
    cleanup_delay = 5
    max_requests = 16384
    pidfile = "/opt/freeradius-server-3.0.17/var/run/radiusd/radiusd.pid"
    checkrad = "/opt/freeradius-server-3.0.17/sbin/checkrad"
    debug_level = 0
    proxy_requests = yes
 log {
     stripped_names = no
     auth = no
     auth_badpass = no
     auth_goodpass = no
     colourise = yes
     msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
     max_attributes = 200
     reject_delay = 1.000000
     status_server = yes
     allow_vulnerable_openssl = "yes"
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
     retry_delay = 5
     retry_count = 3
     default_fallback = no
     dead_time = 120
     wake_all_if_all_dead = no
 }
 home_server localhost {
     ipaddr = 127.0.0.1
     port = 1812
     type = "auth"
     secret = <<< secret >>>
     response_window = 20.000000
     response_timeouts = 1
     max_outstanding = 65536
     zombie_period = 40
     status_check = "status-server"
     ping_interval = 30
     check_interval = 30
     check_timeout = 4
     num_answers_to_alive = 3
     revive_interval = 120
  limit {
      max_connections = 16
      max_requests = 0
      lifetime = 0
      idle_timeout = 0
  }
  coa {
      irt = 2
      mrt = 16
      mrc = 5
      mrd = 30
  }
 }
 home_server example_home_server {
     ipaddr = 1.2.3.4
     port = 1812
     secret = <<< secret >>>
     response_window = 30.000000
     response_timeouts = 1
     max_outstanding = 65536
     zombie_period = 40
     status_check = "none"
     ping_interval = 30
     check_timeout = 4
     num_answers_to_alive = 3
     revive_interval = 300
  limit {
      max_connections = 16
      max_requests = 0
      lifetime = 0
      idle_timeout = 0
  }
  coa {
      irt = 2
      mrt = 16
      mrc = 5
      mrd = 30
  }
 }
 home_server_pool example_home_server_pool {
    virtual_server = example-virtual-server
    home_server = example_home_server
 }
 realm example.net {
    auth_pool = example_home_server_pool
 }
 home_server_pool my_auth_failover {
    type = fail-over
    home_server = localhost
 }
 realm example.com {
    auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
     ipaddr = 127.0.0.1
     require_message_authenticator = no
     secret = <<< secret >>>
     nas_type = "other"
     proto = "*"
  limit {
      max_connections = 16
      lifetime = 0
      idle_timeout = 30
  }
 }
 client localhost_ipv6 {
     ipv6addr = ::1
     require_message_authenticator = no
     secret = <<< secret >>>
  limit {
      max_connections = 16
      lifetime = 0
      idle_timeout = 30
  }
 }
Found debugger attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Auth-Type = digest
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_chap
  # Loading module "chap" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/chap
  # Loaded module rlm_unix
  # Loading module "unix" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/unix
  unix {
      radwtmp = "/opt/freeradius-server-3.0.17/var/log/radius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
      filename = "/opt/freeradius-server-3.0.17/var/log/radius/sradutmp"
      username = "%{User-Name}"
      case_sensitive = yes
      check_with_nas = yes
      permissions = 420
      caller_id = no
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/soh
  soh {
      dhcp = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/realm
  realm IPASS {
      format = "prefix"
      delimiter = "/"
      ignore_default = no
      ignore_null = no
  }
  # Loading module "suffix" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/realm
  realm suffix {
      format = "suffix"
      delimiter = "@"
      ignore_default = no
      ignore_null = no
  }
  # Loading module "realmpercent" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/realm
  realm realmpercent {
      format = "suffix"
      delimiter = "%"
      ignore_default = no
      ignore_null = no
  }
  # Loading module "ntdomain" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/realm
  realm ntdomain {
      format = "prefix"
      delimiter = "\\"
      ignore_default = no
      ignore_null = no
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/pap
  pap {
      normalise = yes
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/eap
  eap {
      default_eap_type = "md5"
      timer_expire = 60
      ignore_unknown_eap_types = no
      cisco_accounting_username_bug = no
      max_sessions = 16384
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/linelog
  linelog {
      filename = "/opt/freeradius-server-3.0.17/var/log/radius/linelog"
      escape_filenames = no
      syslog_severity = "info"
      permissions = 384
      format = "This is a log message for %{User-Name}"
      reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
      filename = "/opt/freeradius-server-3.0.17/var/log/radius/linelog-accounting"
      escape_filenames = no
      syslog_severity = "info"
      permissions = 384
      format = ""
      reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
      filename = "/etc/passwd"
      format = "*User-Name:Crypt-Password:"
      delimiter = ":"
      ignore_nislike = no
      ignore_empty = yes
      allow_multiple_keys = no
      hash_size = 100
  }
  # Loaded module rlm_detail
  # Loading module "auth_log" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail.log
  detail auth_log {
      filename = "/opt/freeradius-server-3.0.17/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      escape_filenames = no
      log_packet_header = no
  }
  # Loading module "reply_log" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail.log
  detail reply_log {
      filename = "/opt/freeradius-server-3.0.17/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      escape_filenames = no
      log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
      filename = "/opt/freeradius-server-3.0.17/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      escape_filenames = no
      log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
      filename = "/opt/freeradius-server-3.0.17/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      escape_filenames = no
      log_packet_header = no
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/mschap
  mschap {
      use_mppe = yes
      require_encryption = no
      require_strong = no
      with_ntdomain_hack = yes
   passchange {
   }
      allow_retry = yes
      winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/replicate
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/utf8
  # Loaded module rlm_expr
  # Loading module "expr" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/expr
  expr {
      safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/expiration
  # Loading module "radutmp" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/radutmp
  radutmp {
      filename = "/opt/freeradius-server-3.0.17/var/log/radius/radutmp"
      username = "%{User-Name}"
      case_sensitive = yes
      check_with_nas = yes
      permissions = 384
      caller_id = yes
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
      driver = "rlm_cache_rbtree"
      key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
      ttl = 15
      max_entries = 0
      epoch = 0
      add_stats = no
  }
  # Loading module "detail" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail
  detail {
      filename = "/opt/freeradius-server-3.0.17/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      escape_filenames = no
      log_packet_header = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/digest
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/unpack
  # Loaded module rlm_files
  # Loading module "files" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/files
  files {
      filename = "/opt/freeradius-server-3.0.17/etc/raddb/mods-config/files/authorize"
      acctusersfile = "/opt/freeradius-server-3.0.17/etc/raddb/mods-config/files/accounting"
      preproxy_usersfile = "/opt/freeradius-server-3.0.17/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  always reject {
      rcode = "reject"
      simulcount = 0
      mpp = no
  }
  # Loading module "fail" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  always fail {
      rcode = "fail"
      simulcount = 0
      mpp = no
  }
  # Loading module "ok" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  always ok {
      rcode = "ok"
      simulcount = 0
      mpp = no
  }
  # Loading module "handled" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  always handled {
      rcode = "handled"
      simulcount = 0
      mpp = no
  }
  # Loading module "invalid" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  always invalid {
      rcode = "invalid"
      simulcount = 0
      mpp = no
  }
  # Loading module "userlock" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  always userlock {
      rcode = "userlock"
      simulcount = 0
      mpp = no
  }
  # Loading module "notfound" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  always notfound {
      rcode = "notfound"
      simulcount = 0
      mpp = no
  }
  # Loading module "noop" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  always noop {
      rcode = "noop"
      simulcount = 0
      mpp = no
  }
  # Loading module "updated" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  always updated {
      rcode = "updated"
      simulcount = 0
      mpp = no
  }
  # Loaded module rlm_date
  # Loading module "date" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/date
  date {
      format = "%b %e %Y %H:%M:%S %Z"
      utc = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
      filename = "/opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/post-proxy"
      key = "%{Realm}"
      relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
      filename = "/opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/pre-proxy"
      key = "%{Realm}"
      relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
      filename = "/opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/access_reject"
      key = "%{User-Name}"
      relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
      filename = "/opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/access_challenge"
      key = "%{User-Name}"
      relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
      filename = "/opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/accounting_response"
      key = "%{User-Name}"
      relaxed = no
  }
  # Loaded module rlm_exec
  # Loading module "ntlm_auth" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
      wait = yes
      program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
      shell_escape = yes
  }
  # Loading module "exec" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/exec
  exec {
      wait = no
      input_pairs = "request"
      shell_escape = yes
      timeout = 10
  }
  # Loading module "echo" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/echo
  exec echo {
      wait = yes
      program = "/bin/echo %{User-Name}"
      input_pairs = "request"
      output_pairs = "reply"
      shell_escape = yes
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/logintime
  logintime {
      minimum_timeout = 60
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/preprocess
  preprocess {
      huntgroups = "/opt/freeradius-server-3.0.17/etc/raddb/mods-config/preprocess/huntgroups"
      hints = "/opt/freeradius-server-3.0.17/etc/raddb/mods-config/preprocess/hints"
      with_ascend_hack = no
      ascend_channels_per_line = 23
      with_ntdomain_hack = no
      with_specialix_jetstream_hack = no
      with_cisco_vsa_hack = no
      with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/dynamic_clients
  instantiate {
  }
  # Instantiating module "IPASS" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/realm
  # Instantiating module "pap" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/pap
  # Instantiating module "eap" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
       challenge = "Password: "
       auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
       tls = "tls-common"
   }
   tls-config tls-common {
       verify_depth = 0
       ca_path = "/opt/freeradius-server-3.0.17/etc/raddb/certs"
       pem_file_type = yes
       private_key_file = "/opt/freeradius-server-3.0.17/etc/raddb/certs/server.pem"
       certificate_file = "/opt/freeradius-server-3.0.17/etc/raddb/certs/server.pem"
       ca_file = "/opt/freeradius-server-3.0.17/etc/raddb/certs/ca.pem"
       private_key_password = <<< secret >>>
       dh_file = "/opt/freeradius-server-3.0.17/etc/raddb/certs/dh"
       fragment_size = 1024
       include_length = yes
       auto_chain = yes
       check_crl = no
       check_all_crl = no
       cipher_list = "DEFAULT"
       cipher_server_preference = no
       ecdh_curve = "prime256v1"
       tls_max_version = ""
       tls_min_version = "1.0"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
       tls = "tls-common"
       default_eap_type = "md5"
       copy_request_to_tunnel = no
       use_tunneled_reply = no
       virtual_server = "inner-tunnel"
       include_length = yes
       require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
       tls = "tls-common"
       default_eap_type = "mschapv2"
       copy_request_to_tunnel = no
       use_tunneled_reply = no
       proxy_tunneled_request_as_eap = yes
       virtual_server = "inner-tunnel"
       soh = no
       require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
       with_ntdomain_hack = no
       send_error = no
   }
  # Instantiating module "linelog" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/linelog
  # Instantiating module "etc_passwd" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "auth_log" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail.log
  # Instantiating module "mschap" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "expiration" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/expiration
  # Instantiating module "cache_eap" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "detail" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail
  # Instantiating module "files" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/files
reading pairlist file /opt/freeradius-server-3.0.17/etc/raddb/mods-config/files/authorize
reading pairlist file /opt/freeradius-server-3.0.17/etc/raddb/mods-config/files/accounting
reading pairlist file /opt/freeradius-server-3.0.17/etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "reject" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  # Instantiating module "attr_filter.post-proxy" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/access_reject
[/opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay"     found in filter list for realm "DEFAULT".
[/opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec"     found in filter list for realm "DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "logintime" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/logintime
  # Instantiating module "preprocess" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/preprocess
reading pairlist file /opt/freeradius-server-3.0.17/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /opt/freeradius-server-3.0.17/etc/raddb/mods-config/preprocess/hints
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /opt/freeradius-server-3.0.17/etc/raddb/radiusd.conf
} # server
server inner-tunnel { # from file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' -- /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/inner-tunnel:331
} # server inner-tunnel
server default { # from file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server example-virtual-server { # from file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/example-virtual-server
 # Loading pre-proxy {...}
} # server example-virtual-server
radiusd: #### Opening IP addresses and Ports ####
listen {
      type = "auth"
      ipaddr = 127.0.0.1
      port = 18120
}
listen {
      type = "auth"
      ipaddr = *
      port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
      type = "acct"
      ipaddr = *
      port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
      type = "auth"
      ipv6addr = ::
      port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
      type = "acct"
      ipv6addr = ::
      port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 60416
Listening on proxy address :: port 60153
Ready to process requests
(0) Received Access-Request Id 154 from 127.0.0.1:47428 to 127.0.0.1:1812 length 76
(0)   User-Name = "[hidden email]"
(0)   Calling-Station-Id = "11-22-33-44-55-66"
(0)   CHAP-Password = 0x61de4bc19a729a75edcbb4bffa8b320da7
(0) # Executing section authorize from file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0) chap:   &control:Auth-Type := CHAP
(0)     [chap] = ok
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: Looking up realm "example.net" for User-Name = "[hidden email]"
(0) suffix: Found realm "example.net"
(0) suffix: Adding Stripped-User-Name = "fred"
(0) suffix: Adding Realm = "example.net"
(0) suffix: Proxying request from user fred to realm example.net
(0) suffix: Preparing to proxy authentication request to realm "example.net"
(0)     [suffix] = updated
(0) eap: No EAP-Message, not doing EAP
(0)     [eap] = noop
(0)     [files] = noop
(0)     [expiration] = noop
(0)     [logintime] = noop
(0)     [pap] = noop
(0)   } # authorize = updated
(0) server example-virtual-server {
(0)   # Executing section pre-proxy from file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/example-virtual-server
(0)     pre-proxy {
(0)       [reject] = reject
(0)     } # pre-proxy = reject
(0) }
(0) There was no response configured: rejecting request
(0) Using Post-Auth-Type Reject
(0) # Executing group from file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/default
(0)   Post-Auth-Type REJECT {
(0) attr_filter.access_reject: EXPAND %{User-Name}
(0) attr_filter.access_reject:    --> [hidden email]
(0) attr_filter.access_reject: Matched entry DEFAULT at line 11
(0)     [attr_filter.access_reject] = updated
(0)     [eap] = noop
(0)     policy remove_reply_message_if_eap {
(0)       if (&reply:EAP-Message && &reply:Reply-Message) {
(0)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(0)       else {
(0)         [noop] = noop
(0)       } # else = noop
(0)     } # policy remove_reply_message_if_eap = noop
(0)   } # Post-Auth-Type REJECT = updated
(0) Sent Access-Reject Id 154 from 127.0.0.1:1812 to 127.0.0.1:47428 length 0
(0) Finished request
Waking up in 4.9 seconds.



Full log from v3.0.18


FreeRADIUS Version 3.0.18
Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /opt/freeradius-server-3.0.18/share/freeradius/dictionary
including dictionary file /opt/freeradius-server-3.0.18/share/freeradius/dictionary.dhcp
including dictionary file /opt/freeradius-server-3.0.18/share/freeradius/dictionary.vqp
including dictionary file /opt/freeradius-server-3.0.18/etc/raddb/dictionary
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/radiusd.conf
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/proxy.conf
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/clients.conf
including files in directory /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/chap
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/unix
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/sradutmp
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/soh
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/realm
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/pap
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/eap
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/linelog
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/passwd
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/detail.log
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/mschap
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/replicate
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/utf8
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/expr
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/expiration
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/radutmp
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/cache_eap
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/detail
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/digest
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/unpack
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/files
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/always
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/date
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/attr_filter
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/ntlm_auth
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/exec
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/echo
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/logintime
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/preprocess
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/dynamic_clients
including files in directory /opt/freeradius-server-3.0.18/etc/raddb/policy.d/
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/policy.d/eap
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/policy.d/dhcp
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/policy.d/canonicalization
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/policy.d/accounting
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/policy.d/filter
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/policy.d/control
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/policy.d/cui
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/policy.d/abfab-tr
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/policy.d/operator-name
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/policy.d/debug
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/policy.d/rfc7542
including files in directory /opt/freeradius-server-3.0.18/etc/raddb/sites-enabled/
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/sites-enabled/inner-tunnel
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/sites-enabled/default
including configuration file /opt/freeradius-server-3.0.18/etc/raddb/sites-enabled/example-virtual-server
main {
    name = "radiusd"
    prefix = "/opt/freeradius-server-3.0.18"
    localstatedir = "/opt/freeradius-server-3.0.18/var"
    sbindir = "/opt/freeradius-server-3.0.18/sbin"
    logdir = "/opt/freeradius-server-3.0.18/var/log/radius"
    run_dir = "/opt/freeradius-server-3.0.18/var/run/radiusd"
    libdir = "/opt/freeradius-server-3.0.18/lib"
    radacctdir = "/opt/freeradius-server-3.0.18/var/log/radius/radacct"
    hostname_lookups = no
    max_request_time = 30
    cleanup_delay = 5
    max_requests = 16384
    pidfile = "/opt/freeradius-server-3.0.18/var/run/radiusd/radiusd.pid"
    checkrad = "/opt/freeradius-server-3.0.18/sbin/checkrad"
    debug_level = 0
    proxy_requests = yes
 log {
     stripped_names = no
     auth = no
     auth_badpass = no
     auth_goodpass = no
     colourise = yes
     msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
     max_attributes = 200
     reject_delay = 1.000000
     status_server = yes
     allow_vulnerable_openssl = "yes"
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
     retry_delay = 5
     retry_count = 3
     default_fallback = no
     dead_time = 120
     wake_all_if_all_dead = no
 }
 home_server localhost {
     ipaddr = 127.0.0.1
     port = 1812
     type = "auth"
     secret = <<< secret >>>
     response_window = 20.000000
     response_timeouts = 1
     max_outstanding = 65536
     zombie_period = 40
     status_check = "status-server"
     ping_interval = 30
     check_interval = 30
     check_timeout = 4
     num_answers_to_alive = 3
     revive_interval = 120
  limit {
      max_connections = 16
      max_requests = 0
      lifetime = 0
      idle_timeout = 0
  }
  coa {
      irt = 2
      mrt = 16
      mrc = 5
      mrd = 30
  }
 }
 home_server example_home_server {
     ipaddr = 1.2.3.4
     port = 1812
     secret = <<< secret >>>
     response_window = 30.000000
     response_timeouts = 1
     max_outstanding = 65536
     zombie_period = 40
     status_check = "none"
     ping_interval = 30
     check_timeout = 4
     num_answers_to_alive = 3
     revive_interval = 300
  limit {
      max_connections = 16
      max_requests = 0
      lifetime = 0
      idle_timeout = 0
  }
  coa {
      irt = 2
      mrt = 16
      mrc = 5
      mrd = 30
  }
 }
 home_server_pool example_home_server_pool {
    virtual_server = example-virtual-server
    home_server = example_home_server
 }
 realm example.net {
    auth_pool = example_home_server_pool
 }
 home_server_pool my_auth_failover {
    type = fail-over
    home_server = localhost
 }
 realm example.com {
    auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
     ipaddr = 127.0.0.1
     require_message_authenticator = no
     secret = <<< secret >>>
     nas_type = "other"
     proto = "*"
  limit {
      max_connections = 16
      lifetime = 0
      idle_timeout = 30
  }
 }
 client localhost_ipv6 {
     ipv6addr = ::1
     require_message_authenticator = no
     secret = <<< secret >>>
  limit {
      max_connections = 16
      lifetime = 0
      idle_timeout = 30
  }
 }
Found debugger attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Auth-Type = digest
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_chap
  # Loading module "chap" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/chap
  # Loaded module rlm_unix
  # Loading module "unix" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/unix
  unix {
      radwtmp = "/opt/freeradius-server-3.0.18/var/log/radius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
      filename = "/opt/freeradius-server-3.0.18/var/log/radius/sradutmp"
      username = "%{User-Name}"
      case_sensitive = yes
      check_with_nas = yes
      permissions = 420
      caller_id = no
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/soh
  soh {
      dhcp = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/realm
  realm IPASS {
      format = "prefix"
      delimiter = "/"
      ignore_default = no
      ignore_null = no
  }
  # Loading module "suffix" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/realm
  realm suffix {
      format = "suffix"
      delimiter = "@"
      ignore_default = no
      ignore_null = no
  }
  # Loading module "bangpath" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/realm
  realm bangpath {
      format = "prefix"
      delimiter = "!"
      ignore_default = no
      ignore_null = no
  }
  # Loading module "realmpercent" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/realm
  realm realmpercent {
      format = "suffix"
      delimiter = "%"
      ignore_default = no
      ignore_null = no
  }
  # Loading module "ntdomain" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/realm
  realm ntdomain {
      format = "prefix"
      delimiter = "\\"
      ignore_default = no
      ignore_null = no
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/pap
  pap {
      normalise = yes
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/eap
  eap {
      default_eap_type = "md5"
      timer_expire = 60
      ignore_unknown_eap_types = no
      cisco_accounting_username_bug = no
      max_sessions = 16384
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/linelog
  linelog {
      filename = "/opt/freeradius-server-3.0.18/var/log/radius/linelog"
      escape_filenames = no
      syslog_severity = "info"
      permissions = 384
      format = "This is a log message for %{User-Name}"
      reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
      filename = "/opt/freeradius-server-3.0.18/var/log/radius/linelog-accounting"
      escape_filenames = no
      syslog_severity = "info"
      permissions = 384
      format = ""
      reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
      filename = "/etc/passwd"
      format = "*User-Name:Crypt-Password:"
      delimiter = ":"
      ignore_nislike = no
      ignore_empty = yes
      allow_multiple_keys = no
      hash_size = 100
  }
  # Loaded module rlm_detail
  # Loading module "auth_log" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/detail.log
  detail auth_log {
      filename = "/opt/freeradius-server-3.0.18/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      escape_filenames = no
      log_packet_header = no
  }
  # Loading module "reply_log" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/detail.log
  detail reply_log {
      filename = "/opt/freeradius-server-3.0.18/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      escape_filenames = no
      log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
      filename = "/opt/freeradius-server-3.0.18/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      escape_filenames = no
      log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
      filename = "/opt/freeradius-server-3.0.18/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      escape_filenames = no
      log_packet_header = no
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/mschap
  mschap {
      use_mppe = yes
      require_encryption = no
      require_strong = no
      with_ntdomain_hack = yes
   passchange {
   }
      allow_retry = yes
      winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/replicate
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/utf8
  # Loaded module rlm_expr
  # Loading module "expr" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/expr
  expr {
      safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/expiration
  # Loading module "radutmp" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/radutmp
  radutmp {
      filename = "/opt/freeradius-server-3.0.18/var/log/radius/radutmp"
      username = "%{User-Name}"
      case_sensitive = yes
      check_with_nas = yes
      permissions = 384
      caller_id = yes
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
      driver = "rlm_cache_rbtree"
      key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
      ttl = 15
      max_entries = 0
      epoch = 0
      add_stats = no
  }
  # Loading module "detail" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/detail
  detail {
      filename = "/opt/freeradius-server-3.0.18/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      escape_filenames = no
      log_packet_header = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/digest
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/unpack
  # Loaded module rlm_files
  # Loading module "files" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/files
  files {
      filename = "/opt/freeradius-server-3.0.18/etc/raddb/mods-config/files/authorize"
      acctusersfile = "/opt/freeradius-server-3.0.18/etc/raddb/mods-config/files/accounting"
      preproxy_usersfile = "/opt/freeradius-server-3.0.18/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/always
  always reject {
      rcode = "reject"
      simulcount = 0
      mpp = no
  }
  # Loading module "fail" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/always
  always fail {
      rcode = "fail"
      simulcount = 0
      mpp = no
  }
  # Loading module "ok" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/always
  always ok {
      rcode = "ok"
      simulcount = 0
      mpp = no
  }
  # Loading module "handled" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/always
  always handled {
      rcode = "handled"
      simulcount = 0
      mpp = no
  }
  # Loading module "invalid" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/always
  always invalid {
      rcode = "invalid"
      simulcount = 0
      mpp = no
  }
  # Loading module "userlock" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/always
  always userlock {
      rcode = "userlock"
      simulcount = 0
      mpp = no
  }
  # Loading module "notfound" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/always
  always notfound {
      rcode = "notfound"
      simulcount = 0
      mpp = no
  }
  # Loading module "noop" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/always
  always noop {
      rcode = "noop"
      simulcount = 0
      mpp = no
  }
  # Loading module "updated" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/always
  always updated {
      rcode = "updated"
      simulcount = 0
      mpp = no
  }
  # Loaded module rlm_date
  # Loading module "date" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/date
  date {
      format = "%b %e %Y %H:%M:%S %Z"
      utc = no
  }
  # Loading module "wispr2date" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/date
  date wispr2date {
      format = "%Y-%m-%dT%H:%M:%S"
      utc = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
      filename = "/opt/freeradius-server-3.0.18/etc/raddb/mods-config/attr_filter/post-proxy"
      key = "%{Realm}"
      relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
      filename = "/opt/freeradius-server-3.0.18/etc/raddb/mods-config/attr_filter/pre-proxy"
      key = "%{Realm}"
      relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
      filename = "/opt/freeradius-server-3.0.18/etc/raddb/mods-config/attr_filter/access_reject"
      key = "%{User-Name}"
      relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
      filename = "/opt/freeradius-server-3.0.18/etc/raddb/mods-config/attr_filter/access_challenge"
      key = "%{User-Name}"
      relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
      filename = "/opt/freeradius-server-3.0.18/etc/raddb/mods-config/attr_filter/accounting_response"
      key = "%{User-Name}"
      relaxed = no
  }
  # Loaded module rlm_exec
  # Loading module "ntlm_auth" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
      wait = yes
      program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
      shell_escape = yes
  }
  # Loading module "exec" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/exec
  exec {
      wait = no
      input_pairs = "request"
      shell_escape = yes
      timeout = 10
  }
  # Loading module "echo" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/echo
  exec echo {
      wait = yes
      program = "/bin/echo %{User-Name}"
      input_pairs = "request"
      output_pairs = "reply"
      shell_escape = yes
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/logintime
  logintime {
      minimum_timeout = 60
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/preprocess
  preprocess {
      huntgroups = "/opt/freeradius-server-3.0.18/etc/raddb/mods-config/preprocess/huntgroups"
      hints = "/opt/freeradius-server-3.0.18/etc/raddb/mods-config/preprocess/hints"
      with_ascend_hack = no
      ascend_channels_per_line = 23
      with_ntdomain_hack = no
      with_specialix_jetstream_hack = no
      with_cisco_vsa_hack = no
      with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/dynamic_clients
  instantiate {
  }
  # Instantiating module "IPASS" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/realm
  # Instantiating module "bangpath" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/realm
  # Instantiating module "pap" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/pap
  # Instantiating module "eap" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
       challenge = "Password: "
       auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
       tls = "tls-common"
   }
   tls-config tls-common {
       verify_depth = 0
       ca_path = "/opt/freeradius-server-3.0.18/etc/raddb/certs"
       pem_file_type = yes
       private_key_file = "/opt/freeradius-server-3.0.18/etc/raddb/certs/server.pem"
       certificate_file = "/opt/freeradius-server-3.0.18/etc/raddb/certs/server.pem"
       ca_file = "/opt/freeradius-server-3.0.18/etc/raddb/certs/ca.pem"
       private_key_password = <<< secret >>>
       dh_file = "/opt/freeradius-server-3.0.18/etc/raddb/certs/dh"
       fragment_size = 1024
       include_length = yes
       auto_chain = yes
       check_crl = no
       check_all_crl = no
       cipher_list = "DEFAULT"
       cipher_server_preference = no
       ecdh_curve = "prime256v1"
       tls_max_version = ""
       tls_min_version = "1.0"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
       tls = "tls-common"
       default_eap_type = "md5"
       copy_request_to_tunnel = no
       use_tunneled_reply = no
       virtual_server = "inner-tunnel"
       include_length = yes
       require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
       tls = "tls-common"
       default_eap_type = "mschapv2"
       copy_request_to_tunnel = no
       use_tunneled_reply = no
       proxy_tunneled_request_as_eap = yes
       virtual_server = "inner-tunnel"
       soh = no
       require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
       with_ntdomain_hack = no
       send_error = no
   }
  # Instantiating module "linelog" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/linelog
  # Instantiating module "etc_passwd" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "auth_log" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/detail.log
  # Instantiating module "mschap" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "expiration" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/expiration
  # Instantiating module "cache_eap" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "detail" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/detail
  # Instantiating module "files" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/files
reading pairlist file /opt/freeradius-server-3.0.18/etc/raddb/mods-config/files/authorize
reading pairlist file /opt/freeradius-server-3.0.18/etc/raddb/mods-config/files/accounting
reading pairlist file /opt/freeradius-server-3.0.18/etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "reject" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/always
  # Instantiating module "attr_filter.post-proxy" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.18/etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.18/etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.18/etc/raddb/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.18/etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.18/etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "logintime" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/logintime
  # Instantiating module "preprocess" from file /opt/freeradius-server-3.0.18/etc/raddb/mods-enabled/preprocess
reading pairlist file /opt/freeradius-server-3.0.18/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /opt/freeradius-server-3.0.18/etc/raddb/mods-config/preprocess/hints
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /opt/freeradius-server-3.0.18/etc/raddb/radiusd.conf
} # server
server inner-tunnel { # from file /opt/freeradius-server-3.0.18/etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' -- /opt/freeradius-server-3.0.18/etc/raddb/sites-enabled/inner-tunnel:339
} # server inner-tunnel
server default { # from file /opt/freeradius-server-3.0.18/etc/raddb/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server example-virtual-server { # from file /opt/freeradius-server-3.0.18/etc/raddb/sites-enabled/example-virtual-server
 # Loading pre-proxy {...}
} # server example-virtual-server
radiusd: #### Opening IP addresses and Ports ####
listen {
      type = "auth"
      ipaddr = 127.0.0.1
      port = 18120
}
listen {
      type = "auth"
      ipaddr = *
      port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
      type = "acct"
      ipaddr = *
      port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
      type = "auth"
      ipv6addr = ::
      port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
      type = "acct"
      ipv6addr = ::
      port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 40399
Listening on proxy address :: port 46152
Ready to process requests
(0) Received Access-Request Id 196 from 127.0.0.1:50186 to 127.0.0.1:1812 length 76
(0)   User-Name = "[hidden email]"
(0)   Calling-Station-Id = "11-22-33-44-55-66"
(0)   CHAP-Password = 0x6fb6ef0cca81d7fd208a1a43fdfb5bc8d9
(0) # Executing section authorize from file /opt/freeradius-server-3.0.18/etc/raddb/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0) chap:   &control:Auth-Type := CHAP
(0)     [chap] = ok
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: Looking up realm "example.net" for User-Name = "[hidden email]"
(0) suffix: Found realm "example.net"
(0) suffix: Adding Stripped-User-Name = "fred"
(0) suffix: Adding Realm = "example.net"
(0) suffix: Proxying request from user fred to realm example.net
(0) suffix: Preparing to proxy authentication request to realm "example.net"
(0)     [suffix] = updated
(0) eap: No EAP-Message, not doing EAP
(0)     [eap] = noop
(0)     [files] = noop
(0)     [expiration] = noop
(0)     [logintime] = noop
(0)     [pap] = noop
(0)   } # authorize = updated
(0) Starting proxy to home server 1.2.3.4 port 1812
(0) Proxying request to home server 1.2.3.4 port 1812 timeout 30.000000
(0) Sent Access-Request Id 182 from 0.0.0.0:40399 to 1.2.3.4:1812 length 117
(0)   User-Name = "fred"
(0)   Calling-Station-Id = "11-22-33-44-55-66"
(0)   CHAP-Password = 0x6fb6ef0cca81d7fd208a1a43fdfb5bc8d9
(0)   Event-Timestamp = "Sep 24 2019 14:43:46 BST"
(0)   NAS-IP-Address = 127.0.0.1
(0)   CHAP-Challenge = 0xbc81eb6f64bbe79822a9886a637d500a
(0)   Message-Authenticator := 0x00
(0)   Proxy-State = 0x313936
Waking up in 0.3 seconds.
(0) Expecting proxy response no later than 29.666644 seconds from now
Waking up in 29.6 seconds.
(0) No proxy response, giving up on request and marking it done
Marking home server 1.2.3.4 port 1812 as zombie (it has not responded in 30.000000 seconds).
(0) ERROR: Failing proxied request for user "fred", due to lack of any response from home server 1.2.3.4 port 1812
(0) Clearing existing &reply: attributes
(0) Found Post-Proxy-Type Fail-Authentication
(0) server example-virtual-server {
(0)   Post-Proxy-Type sub-section not found.  Ignoring.
(0) }
(0) Login incorrect (Home Server failed to respond): [[hidden email]] (from client localhost port 0 cli 11-22-33-44-55-66)
(0) There was no response configured: rejecting request
(0) Using Post-Auth-Type Reject
(0) # Executing group from file /opt/freeradius-server-3.0.18/etc/raddb/sites-enabled/default
(0)   Post-Auth-Type REJECT {
(0) attr_filter.access_reject: EXPAND %{User-Name}
(0) attr_filter.access_reject:    --> [hidden email]
(0) attr_filter.access_reject: Matched entry DEFAULT at line 11
(0)     [attr_filter.access_reject] = updated
(0)     [eap] = noop
(0)     policy remove_reply_message_if_eap {
(0)       if (&reply:EAP-Message && &reply:Reply-Message) {
(0)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(0)       else {
(0)         [noop] = noop
(0)       } # else = noop
(0)     } # policy remove_reply_message_if_eap = noop
(0)   } # Post-Auth-Type REJECT = updated
(0) Sent Access-Reject Id 196 from 127.0.0.1:1812 to 127.0.0.1:50186 length 0
(0) Finished request
Waking up in 4.9 seconds.
(0) Cleaning up request packet ID 196 with timestamp +20
Waking up in 25.1 seconds.
PING: Zombie period is over for home server example_home_server
Marking home server 1.2.3.4 port 1812 as dead.
PING: Reviving home server example_home_server in 300 seconds
Waking up in 299.9 seconds.


-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
| Threaded
Open this post in threaded view
|

Re: Virtual server pre-proxy section not executed for proxied authentication on v3.0.18 and above

Alan DeKok-2
On Oct 1, 2019, at 12:07 PM, <[hidden email]> <[hidden email]> wrote:
>
> I've been attempting to upgrade some FreeRadius servers that have been following the v3.0.x line. Normally taking the existing running configuration from one minor version and applying to the next has just worked, however attempting to go from 3.0.17 to 3.0.18 (or 3.0.19 or the latest head) and it appears that the pre-proxy section of a virtual server isn't called when proxying authentication requests and the packet is sent straight to the remote radius server. Nothing in the change log or proxy.conf etc jumps out at me as indicating a deliberate change in this area.

  That's unfortunate.

> I can reproduce the problem by applying a minimal realm/home_server_pool/home_server/virtual server combination to an out-of-the-box new install of each version so I don't think it is caused by carrying over some old/incompatible configuration from an old version, however it's quite possible my understanding of how proxying is suppose to work is wrong and my configuration worked by accident rather than design and later versions have tightened up the behaviour.

  Quite possibly.  Unfortunately older versions of the server were somewhat flexible, and people relied on that flexibility.   As we've tightened the rules on undefined behaviour, things change.  :(

> Two full outputs from radiusd -X included at end of the email.
>
> An a minimal example to reproduce the problem to proxy.conf I've added:
>
> home_server example_home_server {
>  ipaddr = 1.2.3.4
>  port = 1812
>  secret = password
> }
>
> home_server_pool example_home_server_pool {
>  home_server = example_home_server
>  virtual_server = example-virtual-server

  Ah... so you're using a *different* virtual server for pre/post proxy, and not the same one which is receiving the request.

  That should work.  I'll take a look.

  Alan DeKok.


-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
| Threaded
Open this post in threaded view
|

Re: Virtual server pre-proxy section not executed for proxied authentication on v3.0.18 and above

Alan DeKok-2
In reply to this post by paul.moser
  I've pushed fixes which will run the correct virtual server for both pre and post-proxy.

  We're going to release 3.0.20 soon, so please test.

  Alan DeKok.


-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
| Threaded
Open this post in threaded view
|

Re: Virtual server pre-proxy section not executed for proxied authentication on v3.0.18 and above

paul.moser


>  I've pushed fixes which will run the correct virtual server for both pre and post-proxy.
>
>  We're going to release 3.0.20 soon, so please test.

Thanks. I've run all of our automated tests against a build generated from v3.0.x head and all now pass with the exception of one - this is one that tests a scenario around the use of a fallback server specified in the home server pool as well as a virtual server being assigned the to pool. This isn't a feature we currently have in production but was under development to improve the resilience of our radius infrastructure, the change of behaviour doesn't inconvenience me - in fact I think I might prefer the new behaviour -  but I'll document my observations here in case it's unintended and/or of relevance to someone else.

We have a fallback server configured in a home server pool as well as a virtual server. The fallback server points to a home server that is just a virtual server (as recommend in proxy.conf). The intention of the fallback server is to, in the event of all the real servers that we would normally proxy authentication requests to being down/unreachable, accept any authentication request so valid end users still get service, albeit possibly with some restriction/limitation such as reduced session length, even if that means giving service to some people who we normally wouldn't.

On v3.0.7 when an access-request is received and all home servers in the auth pool are dead then I see the request proxied to the fallback server, it can update the reply in the post-auth section of the virtual server associated with the fallback server and then the post-proxy section of the virtual server associated with the home server pool is also executed and can update the reply.

On a head build v.3.0.x it looks the same except the post-proxy section of the virtual server associated with the home server pool is not executed.

A minimal variation of an out-of-the-box configuration to reproduce this:

Add to proxy.conf:
 
home_server example_home_server {
  ipaddr = 1.2.3.4
  port = 1812
  secret = password
}

home_server fallback_home_server {
  virtual_server = fallback-server
}

home_server_pool example_home_server_pool {
  home_server = example_home_server
  virtual_server = example-virtual-server
  fallback = fallback_home_server
}

realm example.net {
  auth_pool = example_home_server_pool
}

Add 2 virtual servers in sites-enabled:

server fallback-server {  
  authorize {
    chap
  }

  authenticate {
    Auth-Type CHAP {
      ok
    }
  }

  post-auth {
    update reply {
      Reply-Message += "In freevend"
    }
  }
}

server example-virtual-server {
  post-proxy {
    update proxy-reply {
      Reply-Message += "From example virtual server"                                                                      
    }
  }
}

Enabled the control socket server and switch to rw access

Start the server and then using radmin mark example_home_server as dead:
set home_server state 1.2.3.4 1812 dead

Using radclient to send an access request:

for v3.0.17

Sent Access-Request Id 77 from 0.0.0.0:48682 to 127.0.0.1:1812 length 76
        User-Name = "[hidden email]"
        Calling-Station-Id = "11-22-33-44-55-66"
        CHAP-Password = 0x1bc530d9537ffce3561e660003a5550881
        Cleartext-Password = "some_password"
Received Access-Accept Id 77 from 127.0.0.1:1812 to 127.0.0.1:48682 length 62
        Reply-Message = "In freevend"
        Reply-Message = "From example virtual server"


For v3.0.x:

Sent Access-Request Id 4 from 0.0.0.0:52302 to 127.0.0.1:1812 length 76
        User-Name = "[hidden email]"
        Calling-Station-Id = "11-22-33-44-55-66"
        CHAP-Password = 0xc59c43422a302a416372d830824d6e29a5
        Cleartext-Password = "some_password"
Received Access-Accept Id 4 from 127.0.0.1:1812 to 127.0.0.1:52302 length 33
        Reply-Message = "In freevend"


Full v3.0.17 log:

FreeRADIUS Version 3.0.17
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /opt/freeradius-server-3.0.17/share/freeradius/dictionary
including dictionary file /opt/freeradius-server-3.0.17/share/freeradius/dictionary.dhcp
including dictionary file /opt/freeradius-server-3.0.17/share/freeradius/dictionary.vqp
including dictionary file /opt/freeradius-server-3.0.17/etc/raddb/dictionary
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/radiusd.conf
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/proxy.conf
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/clients.conf
including files in directory /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/chap
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/unix
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/sradutmp
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/soh
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/realm
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/pap
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/eap
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/linelog
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/passwd
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail.log
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/mschap
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/replicate
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/utf8
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/expr
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/expiration
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/radutmp
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/cache_eap
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/digest
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/unpack
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/files
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/date
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/ntlm_auth
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/exec
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/echo
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/logintime
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/preprocess
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/dynamic_clients
including files in directory /opt/freeradius-server-3.0.17/etc/raddb/policy.d/
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/eap
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/dhcp
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/canonicalization
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/accounting
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/filter
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/control
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/cui
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/abfab-tr
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/operator-name
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/policy.d/debug
including files in directory /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/inner-tunnel
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/fallback-server
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/default
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/control-socket
including configuration file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/example-virtual-server
main {
        name = "radiusd"
        prefix = "/opt/freeradius-server-3.0.17"
        localstatedir = "/opt/freeradius-server-3.0.17/var"
        sbindir = "/opt/freeradius-server-3.0.17/sbin"
        logdir = "/opt/freeradius-server-3.0.17/var/log/radius"
        run_dir = "/opt/freeradius-server-3.0.17/var/run/radiusd"
        libdir = "/opt/freeradius-server-3.0.17/lib"
        radacctdir = "/opt/freeradius-server-3.0.17/var/log/radius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 16384
        pidfile = "/opt/freeradius-server-3.0.17/var/run/radiusd/radiusd.pid"
        checkrad = "/opt/freeradius-server-3.0.17/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
  stripped_names = no
  auth = no
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
  max_attributes = 200
  reject_delay = 1.000000
  status_server = yes
  allow_vulnerable_openssl = "yes"
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = no
  dead_time = 120
  wake_all_if_all_dead = no
 }
 home_server localhost {
  ipaddr = 127.0.0.1
  port = 1812
  type = "auth"
  secret = <<< secret >>>
  response_window = 20.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "status-server"
  ping_interval = 30
  check_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 120
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server example_home_server {
  ipaddr = 1.2.3.4
  port = 1812
  secret = <<< secret >>>
  response_window = 30.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "none"
  ping_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 300
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server fallback_home_server {
  virtual_server = "fallback-server"
  port = 0
  response_window = 30.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "none"
  ping_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 300
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server_pool example_home_server_pool {
        virtual_server = example-virtual-server
        home_server = example_home_server
        fallback = fallback_home_server
 }
 realm example.net {
        auth_pool = example_home_server_pool
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
  ipaddr = 127.0.0.1
  require_message_authenticator = no
  secret = <<< secret >>>
  nas_type = "other"
  proto = "*"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client localhost_ipv6 {
  ipv6addr = ::1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
Found debugger attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Auth-Type = digest
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_chap
  # Loading module "chap" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/chap
  # Loaded module rlm_unix
  # Loading module "unix" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/unix
  unix {
  radwtmp = "/opt/freeradius-server-3.0.17/var/log/radius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
  filename = "/opt/freeradius-server-3.0.17/var/log/radius/sradutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 420
  caller_id = no
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/soh
  soh {
  dhcp = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/realm
  realm IPASS {
  format = "prefix"
  delimiter = "/"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "suffix" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/realm
  realm suffix {
  format = "suffix"
  delimiter = "@"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "realmpercent" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/realm
  realm realmpercent {
  format = "suffix"
  delimiter = "%"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "ntdomain" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/realm
  realm ntdomain {
  format = "prefix"
  delimiter = "\\"
  ignore_default = no
  ignore_null = no
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/pap
  pap {
  normalise = yes
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/eap
  eap {
  default_eap_type = "md5"
  timer_expire = 60
  ignore_unknown_eap_types = no
  cisco_accounting_username_bug = no
  max_sessions = 16384
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/linelog
  linelog {
  filename = "/opt/freeradius-server-3.0.17/var/log/radius/linelog"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = "This is a log message for %{User-Name}"
  reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
  filename = "/opt/freeradius-server-3.0.17/var/log/radius/linelog-accounting"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = ""
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
  filename = "/etc/passwd"
  format = "*User-Name:Crypt-Password:"
  delimiter = ":"
  ignore_nislike = no
  ignore_empty = yes
  allow_multiple_keys = no
  hash_size = 100
  }
  # Loaded module rlm_detail
  # Loading module "auth_log" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail.log
  detail auth_log {
  filename = "/opt/freeradius-server-3.0.17/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "reply_log" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail.log
  detail reply_log {
  filename = "/opt/freeradius-server-3.0.17/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
  filename = "/opt/freeradius-server-3.0.17/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
  filename = "/opt/freeradius-server-3.0.17/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/mschap
  mschap {
  use_mppe = yes
  require_encryption = no
  require_strong = no
  with_ntdomain_hack = yes
   passchange {
   }
  allow_retry = yes
  winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/replicate
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/utf8
  # Loaded module rlm_expr
  # Loading module "expr" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/expr
  expr {
  safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/expiration
  # Loading module "radutmp" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/radutmp
  radutmp {
  filename = "/opt/freeradius-server-3.0.17/var/log/radius/radutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 384
  caller_id = yes
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
  driver = "rlm_cache_rbtree"
  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  ttl = 15
  max_entries = 0
  epoch = 0
  add_stats = no
  }
  # Loading module "detail" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail
  detail {
  filename = "/opt/freeradius-server-3.0.17/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/digest
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/unpack
  # Loaded module rlm_files
  # Loading module "files" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/files
  files {
  filename = "/opt/freeradius-server-3.0.17/etc/raddb/mods-config/files/authorize"
  acctusersfile = "/opt/freeradius-server-3.0.17/etc/raddb/mods-config/files/accounting"
  preproxy_usersfile = "/opt/freeradius-server-3.0.17/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  always reject {
  rcode = "reject"
  simulcount = 0
  mpp = no
  }
  # Loading module "fail" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  always fail {
  rcode = "fail"
  simulcount = 0
  mpp = no
  }
  # Loading module "ok" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  always ok {
  rcode = "ok"
  simulcount = 0
  mpp = no
  }
  # Loading module "handled" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  always handled {
  rcode = "handled"
  simulcount = 0
  mpp = no
  }
  # Loading module "invalid" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  always invalid {
  rcode = "invalid"
  simulcount = 0
  mpp = no
  }
  # Loading module "userlock" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  always userlock {
  rcode = "userlock"
  simulcount = 0
  mpp = no
  }
  # Loading module "notfound" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  always notfound {
  rcode = "notfound"
  simulcount = 0
  mpp = no
  }
  # Loading module "noop" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  always noop {
  rcode = "noop"
  simulcount = 0
  mpp = no
  }
  # Loading module "updated" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  always updated {
  rcode = "updated"
  simulcount = 0
  mpp = no
  }
  # Loaded module rlm_date
  # Loading module "date" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/date
  date {
  format = "%b %e %Y %H:%M:%S %Z"
  utc = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  filename = "/opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/post-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  filename = "/opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/pre-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  filename = "/opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/access_reject"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  filename = "/opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/access_challenge"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  filename = "/opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/accounting_response"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loaded module rlm_exec
  # Loading module "ntlm_auth" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
  wait = yes
  program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
  shell_escape = yes
  }
  # Loading module "exec" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/exec
  exec {
  wait = no
  input_pairs = "request"
  shell_escape = yes
  timeout = 10
  }
  # Loading module "echo" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/echo
  exec echo {
  wait = yes
  program = "/bin/echo %{User-Name}"
  input_pairs = "request"
  output_pairs = "reply"
  shell_escape = yes
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/logintime
  logintime {
  minimum_timeout = 60
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/preprocess
  preprocess {
  huntgroups = "/opt/freeradius-server-3.0.17/etc/raddb/mods-config/preprocess/huntgroups"
  hints = "/opt/freeradius-server-3.0.17/etc/raddb/mods-config/preprocess/hints"
  with_ascend_hack = no
  ascend_channels_per_line = 23
  with_ntdomain_hack = no
  with_specialix_jetstream_hack = no
  with_cisco_vsa_hack = no
  with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/dynamic_clients
  instantiate {
  }
  # Instantiating module "IPASS" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/realm
  # Instantiating module "pap" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/pap
  # Instantiating module "eap" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
    tls = "tls-common"
   }
   tls-config tls-common {
    verify_depth = 0
    ca_path = "/opt/freeradius-server-3.0.17/etc/raddb/certs"
    pem_file_type = yes
    private_key_file = "/opt/freeradius-server-3.0.17/etc/raddb/certs/server.pem"
    certificate_file = "/opt/freeradius-server-3.0.17/etc/raddb/certs/server.pem"
    ca_file = "/opt/freeradius-server-3.0.17/etc/raddb/certs/ca.pem"
    private_key_password = <<< secret >>>
    dh_file = "/opt/freeradius-server-3.0.17/etc/raddb/certs/dh"
    fragment_size = 1024
    include_length = yes
    auto_chain = yes
    check_crl = no
    check_all_crl = no
    cipher_list = "DEFAULT"
    cipher_server_preference = no
    ecdh_curve = "prime256v1"
    tls_max_version = ""
    tls_min_version = "1.0"
    cache {
    enable = no
    lifetime = 24
    max_entries = 255
    }
    verify {
    skip_if_ocsp_ok = no
    }
    ocsp {
    enable = no
    override_cert_url = yes
    url = "http://127.0.0.1/ocsp/"
    use_nonce = yes
    timeout = 0
    softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
    tls = "tls-common"
    default_eap_type = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
  # Instantiating module "linelog" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/linelog
  # Instantiating module "etc_passwd" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "auth_log" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail.log
  # Instantiating module "mschap" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "expiration" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/expiration
  # Instantiating module "cache_eap" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "detail" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/detail
  # Instantiating module "files" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/files
reading pairlist file /opt/freeradius-server-3.0.17/etc/raddb/mods-config/files/authorize
reading pairlist file /opt/freeradius-server-3.0.17/etc/raddb/mods-config/files/accounting
reading pairlist file /opt/freeradius-server-3.0.17/etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "reject" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/always
  # Instantiating module "attr_filter.post-proxy" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/access_reject
[/opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.17/etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "logintime" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/logintime
  # Instantiating module "preprocess" from file /opt/freeradius-server-3.0.17/etc/raddb/mods-enabled/preprocess
reading pairlist file /opt/freeradius-server-3.0.17/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /opt/freeradius-server-3.0.17/etc/raddb/mods-config/preprocess/hints
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /opt/freeradius-server-3.0.17/etc/raddb/radiusd.conf
} # server
server inner-tunnel { # from file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' -- /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/inner-tunnel:331
} # server inner-tunnel
server fallback-server { # from file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/fallback-server
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading post-auth {...}
} # server fallback-server
server default { # from file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server example-virtual-server { # from file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/example-virtual-server
 # Loading post-proxy {...}
} # server example-virtual-server
radiusd: #### Opening IP addresses and Ports ####
listen {
  type = "control"
 listen {
  socket = "/opt/freeradius-server-3.0.17/var/run/radiusd/radiusd.sock"
  mode = "rw"
  peercred = yes
 }
}
listen {
  type = "auth"
  ipaddr = 127.0.0.1
  port = 18120
}
listen {
  type = "auth"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
Listening on command file /opt/freeradius-server-3.0.17/var/run/radiusd/radiusd.sock
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 52201
Listening on proxy address :: port 60893
Ready to process requests
 ... new connection request on command socket
Listening on command file /opt/freeradius-server-3.0.17/var/run/radiusd/radiusd.sock
Ready to process requests
radmin> set home_server state 1.2.3.4 1812 dead
Marking home server 1.2.3.4 port 1812 as dead.
PING: Reviving home server example_home_server in 300 seconds
Waking up in 299.9 seconds.
 ... shutting down socket command file /opt/freeradius-server-3.0.17/var/run/radiusd/radiusd.sock
Waking up in 297.9 seconds.
(0) Received Access-Request Id 77 from 127.0.0.1:48682 to 127.0.0.1:1812 length 76
(0)   User-Name = "[hidden email]"
(0)   Calling-Station-Id = "11-22-33-44-55-66"
(0)   CHAP-Password = 0x1bc530d9537ffce3561e660003a5550881
(0) # Executing section authorize from file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0) chap:   &control:Auth-Type := CHAP
(0)     [chap] = ok
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: Looking up realm "example.net" for User-Name = "[hidden email]"
(0) suffix: Found realm "example.net"
(0) suffix: Adding Stripped-User-Name = "fred"
(0) suffix: Adding Realm = "example.net"
(0) suffix: Proxying request from user fred to realm example.net
(0) suffix: Preparing to proxy authentication request to realm "example.net"
(0)     [suffix] = updated
(0) eap: No EAP-Message, not doing EAP
(0)     [eap] = noop
(0)     [files] = noop
(0)     [expiration] = noop
(0)     [logintime] = noop
(0)     [pap] = noop
(0)   } # authorize = updated
Home server pool example_home_server_pool failing over to fallback fallback-server
(0) server example-virtual-server {
(0) }
Proxying to virtual server fallback-server
(0) # Executing section authorize from file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/fallback-server
(0)   authorize {
(0) chap:   &control:Auth-Type := CHAP
(0)     [chap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = CHAP
(0) # Executing group from file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/fallback-server
(0)   Auth-Type CHAP {
(0)     [ok] = ok
(0)   } # Auth-Type CHAP = ok
(0) # Executing section post-auth from file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/fallback-server
(0)   post-auth {
(0)     update reply {
(0)       Reply-Message += "In freevend"
(0)     } # update reply = noop
(0)   } # post-auth = noop
(0) Finished internally proxied request.
(0) Clearing existing &reply: attributes
(0) server example-virtual-server {
(0)   # Executing section post-proxy from file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/example-virtual-server
(0)     post-proxy {
(0)       update proxy-reply {
(0)         Reply-Message += "From example virtual server"
(0)       } # update proxy-reply = noop
(0)     } # post-proxy = noop
(0) }
(0) Found Auth-Type = CHAP
(0) Found Auth-Type = Accept
(0) ERROR: Warning:  Found 2 auth-types on request for user 'fred'
(0) Auth-Type = Accept, accepting the user
(0) # Executing section post-auth from file /opt/freeradius-server-3.0.17/etc/raddb/sites-enabled/default
(0)   post-auth {
(0)     update {
(0)       No attributes updated
(0)     } # update = noop
(0)     [exec] = noop
(0)     policy remove_reply_message_if_eap {
(0)       if (&reply:EAP-Message && &reply:Reply-Message) {
(0)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(0)       else {
(0)         [noop] = noop
(0)       } # else = noop
(0)     } # policy remove_reply_message_if_eap = noop
(0)   } # post-auth = noop
(0) Sent Access-Accept Id 77 from 127.0.0.1:1812 to 127.0.0.1:48682 length 0
(0)   Reply-Message += "In freevend"
(0)   Reply-Message += "From example virtual server"
(0) Finished request
Waking up in 4.9 seconds.
(0) Cleaning up request packet ID 77 with timestamp +24
Waking up in 290.2 seconds.



Full v3.0.x log:
FreeRADIUS Version 3.0.20
Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /opt/freeradius-server-3.0.20/share/freeradius/dictionary
including dictionary file /opt/freeradius-server-3.0.20/share/freeradius/dictionary.dhcp
including dictionary file /opt/freeradius-server-3.0.20/share/freeradius/dictionary.vqp
including dictionary file /opt/freeradius-server-3.0.20/etc/raddb/dictionary
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/radiusd.conf
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/proxy.conf
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/clients.conf
including files in directory /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/chap
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/unix
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/sradutmp
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/soh
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/realm
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/pap
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/eap
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/linelog
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/passwd
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/detail.log
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/mschap
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/replicate
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/utf8
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/expr
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/expiration
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/radutmp
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/cache_eap
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/detail
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/digest
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/unpack
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/files
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/always
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/date
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/attr_filter
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/ntlm_auth
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/exec
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/echo
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/logintime
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/preprocess
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/dynamic_clients
including files in directory /opt/freeradius-server-3.0.20/etc/raddb/policy.d/
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/policy.d/eap
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/policy.d/dhcp
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/policy.d/canonicalization
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/policy.d/accounting
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/policy.d/filter
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/policy.d/control
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/policy.d/cui
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/policy.d/abfab-tr
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/policy.d/operator-name
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/policy.d/debug
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/policy.d/rfc7542
including files in directory /opt/freeradius-server-3.0.20/etc/raddb/sites-enabled/
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/sites-enabled/inner-tunnel
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/sites-enabled/fallback-server
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/sites-enabled/default
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/sites-enabled/control-socket
including configuration file /opt/freeradius-server-3.0.20/etc/raddb/sites-enabled/example-virtual-server
main {
        name = "radiusd"
        prefix = "/opt/freeradius-server-3.0.20"
        localstatedir = "/opt/freeradius-server-3.0.20/var"
        sbindir = "/opt/freeradius-server-3.0.20/sbin"
        logdir = "/opt/freeradius-server-3.0.20/var/log/radius"
        run_dir = "/opt/freeradius-server-3.0.20/var/run/radiusd"
        libdir = "/opt/freeradius-server-3.0.20/lib"
        radacctdir = "/opt/freeradius-server-3.0.20/var/log/radius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 16384
        pidfile = "/opt/freeradius-server-3.0.20/var/run/radiusd/radiusd.pid"
        checkrad = "/opt/freeradius-server-3.0.20/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
  stripped_names = no
  auth = no
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
  max_attributes = 200
  reject_delay = 1.000000
  status_server = yes
  allow_vulnerable_openssl = "yes"
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = no
  dead_time = 120
  wake_all_if_all_dead = no
 }
 home_server localhost {
  ipaddr = 127.0.0.1
  port = 1812
  type = "auth"
  secret = <<< secret >>>
  response_window = 20.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "status-server"
  ping_interval = 30
  check_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 120
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server example_home_server {
  ipaddr = 1.2.3.4
  port = 1812
  secret = <<< secret >>>
  response_window = 30.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "none"
  ping_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 300
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server fallback_home_server {
  virtual_server = "fallback-server"
  port = 0
  response_window = 30.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "none"
  ping_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 300
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server_pool example_home_server_pool {
        virtual_server = example-virtual-server
        home_server = example_home_server
        fallback = fallback_home_server
 }
 realm example.net {
        auth_pool = example_home_server_pool
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
  ipaddr = 127.0.0.1
  require_message_authenticator = no
  secret = <<< secret >>>
  nas_type = "other"
  proto = "*"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client localhost_ipv6 {
  ipv6addr = ::1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
Found debugger attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Auth-Type = digest
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_chap
  # Loading module "chap" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/chap
  # Loaded module rlm_unix
  # Loading module "unix" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/unix
  unix {
  radwtmp = "/opt/freeradius-server-3.0.20/var/log/radius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
  filename = "/opt/freeradius-server-3.0.20/var/log/radius/sradutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 420
  caller_id = no
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/soh
  soh {
  dhcp = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/realm
  realm IPASS {
  format = "prefix"
  delimiter = "/"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "suffix" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/realm
  realm suffix {
  format = "suffix"
  delimiter = "@"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "bangpath" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/realm
  realm bangpath {
  format = "prefix"
  delimiter = "!"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "realmpercent" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/realm
  realm realmpercent {
  format = "suffix"
  delimiter = "%"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "ntdomain" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/realm
  realm ntdomain {
  format = "prefix"
  delimiter = "\\"
  ignore_default = no
  ignore_null = no
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/pap
  pap {
  normalise = yes
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/eap
  eap {
  default_eap_type = "md5"
  timer_expire = 60
  ignore_unknown_eap_types = no
  cisco_accounting_username_bug = no
  max_sessions = 16384
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/linelog
  linelog {
  filename = "/opt/freeradius-server-3.0.20/var/log/radius/linelog"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = "This is a log message for %{User-Name}"
  reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
  filename = "/opt/freeradius-server-3.0.20/var/log/radius/linelog-accounting"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = ""
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
  filename = "/etc/passwd"
  format = "*User-Name:Crypt-Password:"
  delimiter = ":"
  ignore_nislike = no
  ignore_empty = yes
  allow_multiple_keys = no
  hash_size = 100
  }
  # Loaded module rlm_detail
  # Loading module "auth_log" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/detail.log
  detail auth_log {
  filename = "/opt/freeradius-server-3.0.20/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "reply_log" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/detail.log
  detail reply_log {
  filename = "/opt/freeradius-server-3.0.20/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
  filename = "/opt/freeradius-server-3.0.20/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
  filename = "/opt/freeradius-server-3.0.20/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/mschap
  mschap {
  use_mppe = yes
  require_encryption = no
  require_strong = no
  with_ntdomain_hack = yes
   passchange {
   }
  allow_retry = yes
  winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/replicate
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/utf8
  # Loaded module rlm_expr
  # Loading module "expr" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/expr
  expr {
  safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/expiration
  # Loading module "radutmp" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/radutmp
  radutmp {
  filename = "/opt/freeradius-server-3.0.20/var/log/radius/radutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 384
  caller_id = yes
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
  driver = "rlm_cache_rbtree"
  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  ttl = 15
  max_entries = 0
  epoch = 0
  add_stats = no
  }
  # Loading module "detail" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/detail
  detail {
  filename = "/opt/freeradius-server-3.0.20/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/digest
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/unpack
  # Loaded module rlm_files
  # Loading module "files" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/files
  files {
  filename = "/opt/freeradius-server-3.0.20/etc/raddb/mods-config/files/authorize"
  acctusersfile = "/opt/freeradius-server-3.0.20/etc/raddb/mods-config/files/accounting"
  preproxy_usersfile = "/opt/freeradius-server-3.0.20/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/always
  always reject {
  rcode = "reject"
  simulcount = 0
  mpp = no
  }
  # Loading module "fail" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/always
  always fail {
  rcode = "fail"
  simulcount = 0
  mpp = no
  }
  # Loading module "ok" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/always
  always ok {
  rcode = "ok"
  simulcount = 0
  mpp = no
  }
  # Loading module "handled" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/always
  always handled {
  rcode = "handled"
  simulcount = 0
  mpp = no
  }
  # Loading module "invalid" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/always
  always invalid {
  rcode = "invalid"
  simulcount = 0
  mpp = no
  }
  # Loading module "userlock" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/always
  always userlock {
  rcode = "userlock"
  simulcount = 0
  mpp = no
  }
  # Loading module "notfound" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/always
  always notfound {
  rcode = "notfound"
  simulcount = 0
  mpp = no
  }
  # Loading module "noop" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/always
  always noop {
  rcode = "noop"
  simulcount = 0
  mpp = no
  }
  # Loading module "updated" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/always
  always updated {
  rcode = "updated"
  simulcount = 0
  mpp = no
  }
  # Loaded module rlm_date
  # Loading module "date" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/date
  date {
  format = "%b %e %Y %H:%M:%S %Z"
  utc = no
  }
  # Loading module "wispr2date" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/date
  date wispr2date {
  format = "%Y-%m-%dT%H:%M:%S"
  utc = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  filename = "/opt/freeradius-server-3.0.20/etc/raddb/mods-config/attr_filter/post-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  filename = "/opt/freeradius-server-3.0.20/etc/raddb/mods-config/attr_filter/pre-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  filename = "/opt/freeradius-server-3.0.20/etc/raddb/mods-config/attr_filter/access_reject"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  filename = "/opt/freeradius-server-3.0.20/etc/raddb/mods-config/attr_filter/access_challenge"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  filename = "/opt/freeradius-server-3.0.20/etc/raddb/mods-config/attr_filter/accounting_response"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loaded module rlm_exec
  # Loading module "ntlm_auth" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
  wait = yes
  program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
  shell_escape = yes
  }
  # Loading module "exec" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/exec
  exec {
  wait = no
  input_pairs = "request"
  shell_escape = yes
  timeout = 10
  }
  # Loading module "echo" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/echo
  exec echo {
  wait = yes
  program = "/bin/echo %{User-Name}"
  input_pairs = "request"
  output_pairs = "reply"
  shell_escape = yes
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/logintime
  logintime {
  minimum_timeout = 60
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/preprocess
  preprocess {
  huntgroups = "/opt/freeradius-server-3.0.20/etc/raddb/mods-config/preprocess/huntgroups"
  hints = "/opt/freeradius-server-3.0.20/etc/raddb/mods-config/preprocess/hints"
  with_ascend_hack = no
  ascend_channels_per_line = 23
  with_ntdomain_hack = no
  with_specialix_jetstream_hack = no
  with_cisco_vsa_hack = no
  with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/dynamic_clients
  instantiate {
  }
  # Instantiating module "IPASS" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/realm
  # Instantiating module "bangpath" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/realm
  # Instantiating module "pap" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/pap
  # Instantiating module "eap" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
    tls = "tls-common"
   }
   tls-config tls-common {
    verify_depth = 0
    ca_path = "/opt/freeradius-server-3.0.20/etc/raddb/certs"
    pem_file_type = yes
    private_key_file = "/opt/freeradius-server-3.0.20/etc/raddb/certs/server.pem"
    certificate_file = "/opt/freeradius-server-3.0.20/etc/raddb/certs/server.pem"
    ca_file = "/opt/freeradius-server-3.0.20/etc/raddb/certs/ca.pem"
    private_key_password = <<< secret >>>
    dh_file = "/opt/freeradius-server-3.0.20/etc/raddb/certs/dh"
    fragment_size = 1024
    include_length = yes
    auto_chain = yes
    check_crl = no
    check_all_crl = no
    cipher_list = "DEFAULT"
    cipher_server_preference = no
    ecdh_curve = "prime256v1"
    disable_tlsv1 = yes
    disable_tlsv1_1 = yes
    tls_max_version = "1.2"
    tls_min_version = "1.2"
    cache {
    enable = no
    lifetime = 24
    max_entries = 255
    }
    verify {
    skip_if_ocsp_ok = no
    }
    ocsp {
    enable = no
    override_cert_url = yes
    url = "http://127.0.0.1/ocsp/"
    use_nonce = yes
    timeout = 0
    softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
    tls = "tls-common"
    default_eap_type = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
  # Instantiating module "linelog" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/linelog
  # Instantiating module "etc_passwd" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "auth_log" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/detail.log
  # Instantiating module "mschap" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "expiration" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/expiration
  # Instantiating module "cache_eap" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "detail" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/detail
  # Instantiating module "files" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/files
reading pairlist file /opt/freeradius-server-3.0.20/etc/raddb/mods-config/files/authorize
reading pairlist file /opt/freeradius-server-3.0.20/etc/raddb/mods-config/files/accounting
reading pairlist file /opt/freeradius-server-3.0.20/etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "reject" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/always
  # Instantiating module "attr_filter.post-proxy" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.20/etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.20/etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.20/etc/raddb/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.20/etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/attr_filter
reading pairlist file /opt/freeradius-server-3.0.20/etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "logintime" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/logintime
  # Instantiating module "preprocess" from file /opt/freeradius-server-3.0.20/etc/raddb/mods-enabled/preprocess
reading pairlist file /opt/freeradius-server-3.0.20/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /opt/freeradius-server-3.0.20/etc/raddb/mods-config/preprocess/hints
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /opt/freeradius-server-3.0.20/etc/raddb/radiusd.conf
} # server
server inner-tunnel { # from file /opt/freeradius-server-3.0.20/etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' -- /opt/freeradius-server-3.0.20/etc/raddb/sites-enabled/inner-tunnel:336
} # server inner-tunnel
server fallback-server { # from file /opt/freeradius-server-3.0.20/etc/raddb/sites-enabled/fallback-server
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading post-auth {...}
} # server fallback-server
server default { # from file /opt/freeradius-server-3.0.20/etc/raddb/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server example-virtual-server { # from file /opt/freeradius-server-3.0.20/etc/raddb/sites-enabled/example-virtual-server
 # Loading post-proxy {...}
} # server example-virtual-server
radiusd: #### Opening IP addresses and Ports ####
listen {
  type = "control"
 listen {
  socket = "/opt/freeradius-server-3.0.20/var/run/radiusd/radiusd.sock"
  mode = "rw"
  peercred = yes
 }
}
listen {
  type = "auth"
  ipaddr = 127.0.0.1
  port = 18120
}
listen {
  type = "auth"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
Listening on command file /opt/freeradius-server-3.0.20/var/run/radiusd/radiusd.sock
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 36046
Listening on proxy address :: port 60907
Ready to process requests
 ... new connection request on command socket
Listening on command file /opt/freeradius-server-3.0.20/var/run/radiusd/radiusd.sock
Ready to process requests
radmin> set home_server state 1.2.3.4 1812 dead
Marking home server 1.2.3.4 port 1812 as dead.
PING: Reviving home server example_home_server in 300 seconds
Waking up in 299.9 seconds.
 ... shutting down socket command file /opt/freeradius-server-3.0.20/var/run/radiusd/radiusd.sock
Waking up in 297.3 seconds.
(0) Received Access-Request Id 47 from 127.0.0.1:42338 to 127.0.0.1:1812 length 76
(0)   User-Name = "[hidden email]"
(0)   Calling-Station-Id = "11-22-33-44-55-66"
(0)   CHAP-Password = 0x9a1e372b8ce20b504af4dec0963e21d11f
(0) # Executing section authorize from file /opt/freeradius-server-3.0.20/etc/raddb/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0) chap:   &control:Auth-Type := CHAP
(0)     [chap] = ok
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: Looking up realm "example.net" for User-Name = "[hidden email]"
(0) suffix: Found realm "example.net"
(0) suffix: Adding Stripped-User-Name = "fred"
(0) suffix: Adding Realm = "example.net"
(0) suffix: Proxying request from user fred to realm example.net
(0) suffix: Preparing to proxy authentication request to realm "example.net"
(0)     [suffix] = updated
(0) eap: No EAP-Message, not doing EAP
(0)     [eap] = noop
(0)     [files] = noop
(0)     [expiration] = noop
(0)     [logintime] = noop
(0)     [pap] = noop
(0)   } # authorize = updated
Home server pool example_home_server_pool failing over to fallback fallback-server
(0) server fallback-server {
(0) }
Proxying to virtual server fallback-server
(0) # Executing section authorize from file /opt/freeradius-server-3.0.20/etc/raddb/sites-enabled/fallback-server
(0)   authorize {
(0) chap:   &control:Auth-Type := CHAP
(0)     [chap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = CHAP
(0) # Executing group from file /opt/freeradius-server-3.0.20/etc/raddb/sites-enabled/fallback-server
(0)   Auth-Type CHAP {
(0)     [ok] = ok
(0)   } # Auth-Type CHAP = ok
(0) # Executing section post-auth from file /opt/freeradius-server-3.0.20/etc/raddb/sites-enabled/fallback-server
(0)   post-auth {
(0)     update reply {
(0)       Reply-Message += "In freevend"
(0)     } # update reply = noop
(0)   } # post-auth = noop
(0) Finished internally proxied request.
(0) Clearing existing &reply: attributes
(0) server fallback-server {
(0) }
(0) Found Auth-Type = CHAP
(0) Found Auth-Type = Accept
(0) ERROR: Warning:  Found 2 auth-types on request for user 'fred'
(0) Auth-Type = Accept, accepting the user
(0) # Executing section post-auth from file /opt/freeradius-server-3.0.20/etc/raddb/sites-enabled/default
(0)   post-auth {
(0)     if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) {
(0)     if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name))  -> FALSE
(0)     update {
(0)       No attributes updated for RHS &session-state:
(0)     } # update = noop
(0)     [exec] = noop
(0)     policy remove_reply_message_if_eap {
(0)       if (&reply:EAP-Message && &reply:Reply-Message) {
(0)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(0)       else {
(0)         [noop] = noop
(0)       } # else = noop
(0)     } # policy remove_reply_message_if_eap = noop
(0)   } # post-auth = noop
(0) Sent Access-Accept Id 47 from 127.0.0.1:1812 to 127.0.0.1:42338 length 0
(0)   Reply-Message += "In freevend"
(0) Finished request
Waking up in 4.9 seconds.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html