VLAN assignment based on NAS ID
Locked
 
|
Hello,
I would like to assign VLANs based on NAS ID. We have different subnets with switches that do 802.1x. I have tried adding NAS-IP-Address to the Users file but without any success. DEFAULT NAS-Port-Type = Ethernet Tunnel-Type = VLAN, Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-Id = 207, NAS-IP-Address = 10.2.106.0/24 DEFAULT NAS-Port-Type = Ethernet Tunnel-Type = VLAN, Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-Id = 200 NAS-IP-Address = 10.2.16.0/24 How to accomplish this the right way? Thanks. Kind regards, Max - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html |
|
|
On Mar 22, 2021, at 3:09 PM, Max Elzinga <[hidden email]> wrote:
> I would like to assign VLANs based on NAS ID. We have different subnets with switches that do 802.1x. I have tried adding NAS-IP-Address to the Users file but without any success. $ man users The check / comparison items go on the first line, not in the replies. But, the "users" file can't do IP/mask matching, for historical reasons. Instead, do: authorize { ... if (&NAS-Port-Type == Ethernet) { if ( <ipv4prefix>&NAS-IP-Address =10.2.106.0/24) { update reply { &Tunnel-Type = VLAN, &Tunnel-Medium-Type = IEEE-802, &Tunnel-Private-Group-Id = 207, } } ... } Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html |
|
|
Hi Alan,
In what file do you want me to put: authorize { ... if (&NAS-Port-Type == Ethernet) { if ( <ipv4prefix>&NAS-IP-Address =10.2.106.0/24) { update reply { &Tunnel-Type = VLAN, &Tunnel-Medium-Type = IEEE-802, &Tunnel-Private-Group-Id = 207, } } ... } Thanks. Kind regards, Max - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html |
|
|
On Mar 22, 2021, at 3:51 PM, Max Elzinga <[hidden email]> wrote:
> > Hi Alan, > > In what file do you want me to put: Where does the "authorize" section go? $ cd /etc/raddb $ grep -r authorize . Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html |
|
|
Hello Alan,
I have tested it with sites-enabled/default and inner-tunnel file but without any luck. Are those the right files? Thanks. Kind regards, Max Elzinga - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html |
|
|
On Mar 22, 2021, at 4:35 PM, Max Elzinga <[hidden email]> wrote:
> > I have tested it with sites-enabled/default and inner-tunnel file but without any luck. What does that mean? http://wiki.freeradius.org/list-help > Are those the right files? Yes. Why not just run the server in debug mode, as suggested *everywhere*? Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html |
|
|
Hi Alan,
Here is the log file: FreeRADIUS Version 3.0.20 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/eap including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client STADHUISPLEIN-ACCESSPOINT01 { ipaddr = 10.2.16.9 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client STADHUISPLEIN-ACCESS-SWITCHES { ipaddr = 10.2.16.0/23 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client SCHELLUINESTRAAT-TERREIN07-ACCESS-SWITCHES { ipaddr = 10.2.106.0/24 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = ntlm_auth # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=DU-MSDOM --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --domain=DU-MSDOM --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}" passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "10.2.2.101" identity = "CN=svc_freeradius,OU=Service Accounts,OU=Users,OU=Deli Home Products,DC=du,DC=msad" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=du,dc=msad" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } instantiate { } # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): authenticating by calling 'ntlm_auth' # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize [/etc/freeradius/3.0/mods-config/files/authorize]:3 Changing 'NAS-Port-Type =' to 'NAS-Port-Type ==' for comparing RADIUS attribute in check item list for user DEFAULT [/etc/freeradius/3.0/mods-config/files/authorize]:20 Changing 'NAS-Port-Type =' to 'NAS-Port-Type ==' for comparing RADIUS attribute in check item list for user DEFAULT [/etc/freeradius/3.0/mods-config/files/authorize]:25 Changing 'NAS-Port-Type =' to 'NAS-Port-Type ==' for comparing RADIUS attribute in check item list for user DEFAULT [/etc/freeradius/3.0/mods-config/files/authorize]:25 Check item "LDAP-Group" found in reply item list for user "DEFAULT". This attribute MUST go on the first line with the other check items reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20449 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/freeradius/3.0/certs/serverkey.pem" certificate_file = "/etc/freeradius/3.0/certs/server.pem" ca_file = "/etc/freeradius/3.0/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "1.3" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } The configuration allows TLS 1.0 and/or TLS 1.1. We STRONGLY recommned using only TLS 1.2 for security Please set: min_tls_version = "1.2" # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:353 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 57119 Listening on proxy address :: port 48502 Ready to process requests (0) Received Access-Request Id 62 from 10.2.16.52:1812 to 10.2.2.118:1812 length 387 (0) Framed-MTU = 1492 (0) NAS-IP-Address = 10.2.16.52 (0) NAS-Identifier = "DHP-046SW" (0) User-Name = "host/JWR-0003D.du.msad" (0) Service-Type = Framed-User (0) Framed-Protocol = PPP (0) NAS-Port = 1 (0) NAS-Port-Type = Ethernet (0) NAS-Port-Id = "1" (0) Called-Station-Id = "04-09-73-0f-8b-20" (0) Calling-Station-Id = "98-e7-f4-bb-27-2e" (0) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (0) Tunnel-Type:0 = VLAN (0) Tunnel-Medium-Type:0 = IEEE-802 (0) Tunnel-Private-Group-Id:0 = "400" (0) EAP-Message = 0x0201001b01686f73742f4a57522d30303033442e64752e6d736164 (0) Message-Authenticator = 0x578469d8fbe10757aa0c007a35c55929 (0) MS-RAS-Vendor = 11 (0) HP-Capability-Advert = 0x011a0000000b28 (0) HP-Capability-Advert = 0x011a0000000b2e (0) HP-Capability-Advert = 0x011a0000000b30 (0) HP-Capability-Advert = 0x011a0000000b3d (0) HP-Capability-Advert = 0x011a0000000b18 (0) HP-Capability-Advert = 0x011a0000000b19 (0) HP-Capability-Advert = 0x0138 (0) HP-Capability-Advert = 0x013a (0) HP-Capability-Advert = 0x0140 (0) HP-Capability-Advert = 0x0141 (0) HP-Capability-Advert = 0x0151 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) if (&NAS-Port-Type == Ethernet) { (0) if (&NAS-Port-Type == Ethernet) -> TRUE (0) if (&NAS-Port-Type == Ethernet) { (0) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) { (0) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) -> FALSE (0) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) { (0) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) -> FALSE (0) } # if (&NAS-Port-Type == Ethernet) = notfound (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "host/JWR-0003D.du.msad", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 1 length 27 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_peap to process data (0) eap_peap: Initiating new TLS session (0) eap_peap: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 2 length 6 (0) eap: EAP session adding &reply:State = 0xb7afce9db7add79c (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 62 from 10.2.2.118:1812 to 10.2.16.52:1812 length 0 (0) EAP-Message = 0x010200061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xb7afce9db7add79c3fdc795d563c7401 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 63 from 10.2.16.52:1812 to 10.2.2.118:1812 length 384 (1) Framed-MTU = 1492 (1) NAS-IP-Address = 10.2.16.52 (1) NAS-Identifier = "DHP-046SW" (1) User-Name = "host/JWR-0003D.du.msad" (1) Service-Type = Framed-User (1) Framed-Protocol = PPP (1) NAS-Port = 1 (1) NAS-Port-Type = Ethernet (1) NAS-Port-Id = "1" (1) Called-Station-Id = "04-09-73-0f-8b-20" (1) Calling-Station-Id = "98-e7-f4-bb-27-2e" (1) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (1) Tunnel-Type:0 = VLAN (1) Tunnel-Medium-Type:0 = IEEE-802 (1) Tunnel-Private-Group-Id:0 = "400" (1) State = 0xb7afce9db7add79c3fdc795d563c7401 (1) EAP-Message = 0x02020006030d (1) Message-Authenticator = 0x65a7d58b4d83c0dba37d181e0f9c1ce1 (1) MS-RAS-Vendor = 11 (1) HP-Capability-Advert = 0x011a0000000b28 (1) HP-Capability-Advert = 0x011a0000000b2e (1) HP-Capability-Advert = 0x011a0000000b30 (1) HP-Capability-Advert = 0x011a0000000b3d (1) HP-Capability-Advert = 0x011a0000000b18 (1) HP-Capability-Advert = 0x011a0000000b19 (1) HP-Capability-Advert = 0x0138 (1) HP-Capability-Advert = 0x013a (1) HP-Capability-Advert = 0x0140 (1) HP-Capability-Advert = 0x0141 (1) HP-Capability-Advert = 0x0151 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) if (&NAS-Port-Type == Ethernet) { (1) if (&NAS-Port-Type == Ethernet) -> TRUE (1) if (&NAS-Port-Type == Ethernet) { (1) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) { (1) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) -> FALSE (1) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) { (1) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) -> FALSE (1) } # if (&NAS-Port-Type == Ethernet) = notfound (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "host/JWR-0003D.du.msad", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 2 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) files: users: Matched entry DEFAULT at line 3 (1) [files] = ok rlm_ldap (ldap): Reserved connection (0) (1) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (1) ldap: --> (sAMAccountName=host/JWR-0003D.du.msad) (1) ldap: Performing search in "dc=du,dc=msad" with filter "(sAMAccountName=host/JWR-0003D.du.msad)", scope "sub" (1) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.du.msad/DC=DomainDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.du.msad/DC=ForestDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://du.msad/CN=Configuration,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (1) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (0) - Was referred to a different LDAP server Need 6 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (1) [ldap] = notfound (1) [expiration] = noop (1) [logintime] = noop Not doing PAP as Auth-Type is already set. (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xb7afce9db7add79c (1) eap: Finished EAP session with state 0xb7afce9db7add79c (1) eap: Previous EAP request found for state 0xb7afce9db7add79c, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type TLS (13) (1) eap: Calling submodule eap_tls to process data (1) eap_tls: Initiating new TLS session (1) eap_tls: Setting verify mode to require certificate from client (1) eap_tls: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 3 length 6 (1) eap: EAP session adding &reply:State = 0xb7afce9db6acc39c (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 63 from 10.2.2.118:1812 to 10.2.16.52:1812 length 0 (1) EAP-Message = 0x010300060d20 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xb7afce9db6acc39c3fdc795d563c7401 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 64 from 10.2.16.52:1812 to 10.2.2.118:1812 length 550 (2) Framed-MTU = 1492 (2) NAS-IP-Address = 10.2.16.52 (2) NAS-Identifier = "DHP-046SW" (2) User-Name = "host/JWR-0003D.du.msad" (2) Service-Type = Framed-User (2) Framed-Protocol = PPP (2) NAS-Port = 1 (2) NAS-Port-Type = Ethernet (2) NAS-Port-Id = "1" (2) Called-Station-Id = "04-09-73-0f-8b-20" (2) Calling-Station-Id = "98-e7-f4-bb-27-2e" (2) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (2) Tunnel-Type:0 = VLAN (2) Tunnel-Medium-Type:0 = IEEE-802 (2) Tunnel-Private-Group-Id:0 = "400" (2) State = 0xb7afce9db6acc39c3fdc795d563c7401 (2) EAP-Message = 0x020300ac0d80000000a2160303009d010000990303605905c0fa596859d7257499753000cb67740f781e2ce495075272c08443ccd000002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a01000046000500050100000000000a00080006001d00170018000b00020100000d001a00180804080508060401050102010403050302030202060106030023000000170000ff01000100 (2) Message-Authenticator = 0xf40cd1156401a531deca64313a3f405b (2) MS-RAS-Vendor = 11 (2) HP-Capability-Advert = 0x011a0000000b28 (2) HP-Capability-Advert = 0x011a0000000b2e (2) HP-Capability-Advert = 0x011a0000000b30 (2) HP-Capability-Advert = 0x011a0000000b3d (2) HP-Capability-Advert = 0x011a0000000b18 (2) HP-Capability-Advert = 0x011a0000000b19 (2) HP-Capability-Advert = 0x0138 (2) HP-Capability-Advert = 0x013a (2) HP-Capability-Advert = 0x0140 (2) HP-Capability-Advert = 0x0141 (2) HP-Capability-Advert = 0x0151 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) if (&NAS-Port-Type == Ethernet) { (2) if (&NAS-Port-Type == Ethernet) -> TRUE (2) if (&NAS-Port-Type == Ethernet) { (2) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) { (2) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) -> FALSE (2) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) { (2) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) -> FALSE (2) } # if (&NAS-Port-Type == Ethernet) = notfound (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "host/JWR-0003D.du.msad", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 3 length 172 (2) eap: No EAP Start, assuming it's an on-going EAP conversation (2) [eap] = updated (2) files: users: Matched entry DEFAULT at line 3 (2) [files] = ok rlm_ldap (ldap): Reserved connection (1) (2) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (2) ldap: --> (sAMAccountName=host/JWR-0003D.du.msad) (2) ldap: Performing search in "dc=du,dc=msad" with filter "(sAMAccountName=host/JWR-0003D.du.msad)", scope "sub" (2) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.du.msad/DC=DomainDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.du.msad/DC=ForestDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://du.msad/CN=Configuration,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (2) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (1) - Was referred to a different LDAP server (2) [ldap] = notfound (2) [expiration] = noop (2) [logintime] = noop (2) [pap] = noop (2) } # authorize = updated (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xb7afce9db6acc39c (2) eap: Finished EAP session with state 0xb7afce9db6acc39c (2) eap: Previous EAP request found for state 0xb7afce9db6acc39c, released from the list (2) eap: Peer sent packet with method EAP TLS (13) (2) eap: Calling submodule eap_tls to process data (2) eap_tls: Continuing EAP-TLS (2) eap_tls: Peer indicated complete TLS record size will be 162 bytes (2) eap_tls: Got complete TLS record (162 bytes) (2) eap_tls: [eaptls verify] = length included (2) eap_tls: (other): before SSL initialization (2) eap_tls: TLS_accept: before SSL initialization (2) eap_tls: TLS_accept: before SSL initialization (2) eap_tls: <<< recv TLS 1.3 [length 009d] (2) eap_tls: TLS_accept: SSLv3/TLS read client hello (2) eap_tls: >>> send TLS 1.2 [length 003d] (2) eap_tls: TLS_accept: SSLv3/TLS write server hello (2) eap_tls: >>> send TLS 1.2 [length 0de3] (2) eap_tls: TLS_accept: SSLv3/TLS write certificate (2) eap_tls: >>> send TLS 1.2 [length 014d] (2) eap_tls: TLS_accept: SSLv3/TLS write key exchange (2) eap_tls: >>> send TLS 1.2 [length 00c0] (2) eap_tls: TLS_accept: SSLv3/TLS write certificate request (2) eap_tls: >>> send TLS 1.2 [length 0004] (2) eap_tls: TLS_accept: SSLv3/TLS write server done (2) eap_tls: TLS_accept: Need to read more data: SSLv3/TLS write server done (2) eap_tls: TLS - In Handshake Phase (2) eap_tls: TLS - got 4170 bytes of data (2) eap_tls: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 4 length 1004 (2) eap: EAP session adding &reply:State = 0xb7afce9db5abc39c (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 64 from 10.2.2.118:1812 to 10.2.16.52:1812 length 0 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xb7afce9db5abc39c3fdc795d563c7401 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 65 from 10.2.16.52:1812 to 10.2.2.118:1812 length 384 (3) Framed-MTU = 1492 (3) NAS-IP-Address = 10.2.16.52 (3) NAS-Identifier = "DHP-046SW" (3) User-Name = "host/JWR-0003D.du.msad" (3) Service-Type = Framed-User (3) Framed-Protocol = PPP (3) NAS-Port = 1 (3) NAS-Port-Type = Ethernet (3) NAS-Port-Id = "1" (3) Called-Station-Id = "04-09-73-0f-8b-20" (3) Calling-Station-Id = "98-e7-f4-bb-27-2e" (3) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (3) Tunnel-Type:0 = VLAN (3) Tunnel-Medium-Type:0 = IEEE-802 (3) Tunnel-Private-Group-Id:0 = "400" (3) State = 0xb7afce9db5abc39c3fdc795d563c7401 (3) EAP-Message = 0x020400060d00 (3) Message-Authenticator = 0x1b14dc5c0ce171b1c8911ec11225c208 (3) MS-RAS-Vendor = 11 (3) HP-Capability-Advert = 0x011a0000000b28 (3) HP-Capability-Advert = 0x011a0000000b2e (3) HP-Capability-Advert = 0x011a0000000b30 (3) HP-Capability-Advert = 0x011a0000000b3d (3) HP-Capability-Advert = 0x011a0000000b18 (3) HP-Capability-Advert = 0x011a0000000b19 (3) HP-Capability-Advert = 0x0138 (3) HP-Capability-Advert = 0x013a (3) HP-Capability-Advert = 0x0140 (3) HP-Capability-Advert = 0x0141 (3) HP-Capability-Advert = 0x0151 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) if (&NAS-Port-Type == Ethernet) { (3) if (&NAS-Port-Type == Ethernet) -> TRUE (3) if (&NAS-Port-Type == Ethernet) { (3) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) { (3) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) -> FALSE (3) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) { (3) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) -> FALSE (3) } # if (&NAS-Port-Type == Ethernet) = notfound (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "host/JWR-0003D.du.msad", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 4 length 6 (3) eap: No EAP Start, assuming it's an on-going EAP conversation (3) [eap] = updated (3) files: users: Matched entry DEFAULT at line 3 (3) [files] = ok rlm_ldap (ldap): Reserved connection (2) (3) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (3) ldap: --> (sAMAccountName=host/JWR-0003D.du.msad) (3) ldap: Performing search in "dc=du,dc=msad" with filter "(sAMAccountName=host/JWR-0003D.du.msad)", scope "sub" (3) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.du.msad/DC=DomainDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.du.msad/DC=ForestDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://du.msad/CN=Configuration,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (3) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (2) - Was referred to a different LDAP server (3) [ldap] = notfound (3) [expiration] = noop (3) [logintime] = noop (3) [pap] = noop (3) } # authorize = updated (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xb7afce9db5abc39c (3) eap: Finished EAP session with state 0xb7afce9db5abc39c (3) eap: Previous EAP request found for state 0xb7afce9db5abc39c, released from the list (3) eap: Peer sent packet with method EAP TLS (13) (3) eap: Calling submodule eap_tls to process data (3) eap_tls: Continuing EAP-TLS (3) eap_tls: Peer ACKed our handshake fragment (3) eap_tls: [eaptls verify] = request (3) eap_tls: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 5 length 1004 (3) eap: EAP session adding &reply:State = 0xb7afce9db4aac39c (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 65 from 10.2.2.118:1812 to 10.2.16.52:1812 length 0 (3) EAP-Message = 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 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xb7afce9db4aac39c3fdc795d563c7401 (3) Finished request Waking up in 4.8 seconds. (4) Received Access-Request Id 66 from 10.2.16.52:1812 to 10.2.2.118:1812 length 384 (4) Framed-MTU = 1492 (4) NAS-IP-Address = 10.2.16.52 (4) NAS-Identifier = "DHP-046SW" (4) User-Name = "host/JWR-0003D.du.msad" (4) Service-Type = Framed-User (4) Framed-Protocol = PPP (4) NAS-Port = 1 (4) NAS-Port-Type = Ethernet (4) NAS-Port-Id = "1" (4) Called-Station-Id = "04-09-73-0f-8b-20" (4) Calling-Station-Id = "98-e7-f4-bb-27-2e" (4) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (4) Tunnel-Type:0 = VLAN (4) Tunnel-Medium-Type:0 = IEEE-802 (4) Tunnel-Private-Group-Id:0 = "400" (4) State = 0xb7afce9db4aac39c3fdc795d563c7401 (4) EAP-Message = 0x020500060d00 (4) Message-Authenticator = 0x6254a0f351aaa945856f4bbb01aa778e (4) MS-RAS-Vendor = 11 (4) HP-Capability-Advert = 0x011a0000000b28 (4) HP-Capability-Advert = 0x011a0000000b2e (4) HP-Capability-Advert = 0x011a0000000b30 (4) HP-Capability-Advert = 0x011a0000000b3d (4) HP-Capability-Advert = 0x011a0000000b18 (4) HP-Capability-Advert = 0x011a0000000b19 (4) HP-Capability-Advert = 0x0138 (4) HP-Capability-Advert = 0x013a (4) HP-Capability-Advert = 0x0140 (4) HP-Capability-Advert = 0x0141 (4) HP-Capability-Advert = 0x0151 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) if (&NAS-Port-Type == Ethernet) { (4) if (&NAS-Port-Type == Ethernet) -> TRUE (4) if (&NAS-Port-Type == Ethernet) { (4) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) { (4) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) -> FALSE (4) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) { (4) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) -> FALSE (4) } # if (&NAS-Port-Type == Ethernet) = notfound (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "host/JWR-0003D.du.msad", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 5 length 6 (4) eap: No EAP Start, assuming it's an on-going EAP conversation (4) [eap] = updated (4) files: users: Matched entry DEFAULT at line 3 (4) [files] = ok rlm_ldap (ldap): Reserved connection (3) (4) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (4) ldap: --> (sAMAccountName=host/JWR-0003D.du.msad) (4) ldap: Performing search in "dc=du,dc=msad" with filter "(sAMAccountName=host/JWR-0003D.du.msad)", scope "sub" (4) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.du.msad/DC=DomainDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.du.msad/DC=ForestDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://du.msad/CN=Configuration,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (4) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (3) - Was referred to a different LDAP server (4) [ldap] = notfound (4) [expiration] = noop (4) [logintime] = noop (4) [pap] = noop (4) } # authorize = updated (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xb7afce9db4aac39c (4) eap: Finished EAP session with state 0xb7afce9db4aac39c (4) eap: Previous EAP request found for state 0xb7afce9db4aac39c, released from the list (4) eap: Peer sent packet with method EAP TLS (13) (4) eap: Calling submodule eap_tls to process data (4) eap_tls: Continuing EAP-TLS (4) eap_tls: Peer ACKed our handshake fragment (4) eap_tls: [eaptls verify] = request (4) eap_tls: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 6 length 1004 (4) eap: EAP session adding &reply:State = 0xb7afce9db3a9c39c (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 66 from 10.2.2.118:1812 to 10.2.16.52:1812 length 0 (4) EAP-Message = 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 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xb7afce9db3a9c39c3fdc795d563c7401 (4) Finished request Waking up in 4.8 seconds. (5) Received Access-Request Id 67 from 10.2.16.52:1812 to 10.2.2.118:1812 length 384 (5) Framed-MTU = 1492 (5) NAS-IP-Address = 10.2.16.52 (5) NAS-Identifier = "DHP-046SW" (5) User-Name = "host/JWR-0003D.du.msad" (5) Service-Type = Framed-User (5) Framed-Protocol = PPP (5) NAS-Port = 1 (5) NAS-Port-Type = Ethernet (5) NAS-Port-Id = "1" (5) Called-Station-Id = "04-09-73-0f-8b-20" (5) Calling-Station-Id = "98-e7-f4-bb-27-2e" (5) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (5) Tunnel-Type:0 = VLAN (5) Tunnel-Medium-Type:0 = IEEE-802 (5) Tunnel-Private-Group-Id:0 = "400" (5) State = 0xb7afce9db3a9c39c3fdc795d563c7401 (5) EAP-Message = 0x020600060d00 (5) Message-Authenticator = 0x24a64ca9b8ab324a650da6c7144ba615 (5) MS-RAS-Vendor = 11 (5) HP-Capability-Advert = 0x011a0000000b28 (5) HP-Capability-Advert = 0x011a0000000b2e (5) HP-Capability-Advert = 0x011a0000000b30 (5) HP-Capability-Advert = 0x011a0000000b3d (5) HP-Capability-Advert = 0x011a0000000b18 (5) HP-Capability-Advert = 0x011a0000000b19 (5) HP-Capability-Advert = 0x0138 (5) HP-Capability-Advert = 0x013a (5) HP-Capability-Advert = 0x0140 (5) HP-Capability-Advert = 0x0141 (5) HP-Capability-Advert = 0x0151 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) if (&NAS-Port-Type == Ethernet) { (5) if (&NAS-Port-Type == Ethernet) -> TRUE (5) if (&NAS-Port-Type == Ethernet) { (5) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) { (5) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) -> FALSE (5) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) { (5) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) -> FALSE (5) } # if (&NAS-Port-Type == Ethernet) = notfound (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "host/JWR-0003D.du.msad", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 6 length 6 (5) eap: No EAP Start, assuming it's an on-going EAP conversation (5) [eap] = updated (5) files: users: Matched entry DEFAULT at line 3 (5) [files] = ok rlm_ldap (ldap): Reserved connection (4) (5) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (5) ldap: --> (sAMAccountName=host/JWR-0003D.du.msad) (5) ldap: Performing search in "dc=du,dc=msad" with filter "(sAMAccountName=host/JWR-0003D.du.msad)", scope "sub" (5) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.du.msad/DC=DomainDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.du.msad/DC=ForestDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://du.msad/CN=Configuration,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (5) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (4) - Was referred to a different LDAP server (5) [ldap] = notfound (5) [expiration] = noop (5) [logintime] = noop (5) [pap] = noop (5) } # authorize = updated (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xb7afce9db3a9c39c (5) eap: Finished EAP session with state 0xb7afce9db3a9c39c (5) eap: Previous EAP request found for state 0xb7afce9db3a9c39c, released from the list (5) eap: Peer sent packet with method EAP TLS (13) (5) eap: Calling submodule eap_tls to process data (5) eap_tls: Continuing EAP-TLS (5) eap_tls: Peer ACKed our handshake fragment (5) eap_tls: [eaptls verify] = request (5) eap_tls: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 7 length 1004 (5) eap: EAP session adding &reply:State = 0xb7afce9db2a8c39c (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 67 from 10.2.2.118:1812 to 10.2.16.52:1812 length 0 (5) EAP-Message = 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 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xb7afce9db2a8c39c3fdc795d563c7401 (5) Finished request Waking up in 4.8 seconds. (6) Received Access-Request Id 68 from 10.2.16.52:1812 to 10.2.2.118:1812 length 384 (6) Framed-MTU = 1492 (6) NAS-IP-Address = 10.2.16.52 (6) NAS-Identifier = "DHP-046SW" (6) User-Name = "host/JWR-0003D.du.msad" (6) Service-Type = Framed-User (6) Framed-Protocol = PPP (6) NAS-Port = 1 (6) NAS-Port-Type = Ethernet (6) NAS-Port-Id = "1" (6) Called-Station-Id = "04-09-73-0f-8b-20" (6) Calling-Station-Id = "98-e7-f4-bb-27-2e" (6) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (6) Tunnel-Type:0 = VLAN (6) Tunnel-Medium-Type:0 = IEEE-802 (6) Tunnel-Private-Group-Id:0 = "400" (6) State = 0xb7afce9db2a8c39c3fdc795d563c7401 (6) EAP-Message = 0x020700060d00 (6) Message-Authenticator = 0xfe8e778c7fe70c6929ece851a3477e9d (6) MS-RAS-Vendor = 11 (6) HP-Capability-Advert = 0x011a0000000b28 (6) HP-Capability-Advert = 0x011a0000000b2e (6) HP-Capability-Advert = 0x011a0000000b30 (6) HP-Capability-Advert = 0x011a0000000b3d (6) HP-Capability-Advert = 0x011a0000000b18 (6) HP-Capability-Advert = 0x011a0000000b19 (6) HP-Capability-Advert = 0x0138 (6) HP-Capability-Advert = 0x013a (6) HP-Capability-Advert = 0x0140 (6) HP-Capability-Advert = 0x0141 (6) HP-Capability-Advert = 0x0151 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) if (&NAS-Port-Type == Ethernet) { (6) if (&NAS-Port-Type == Ethernet) -> TRUE (6) if (&NAS-Port-Type == Ethernet) { (6) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) { (6) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) -> FALSE (6) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) { (6) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) -> FALSE (6) } # if (&NAS-Port-Type == Ethernet) = notfound (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "host/JWR-0003D.du.msad", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 7 length 6 (6) eap: No EAP Start, assuming it's an on-going EAP conversation (6) [eap] = updated (6) files: users: Matched entry DEFAULT at line 3 (6) [files] = ok rlm_ldap (ldap): Reserved connection (5) (6) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (6) ldap: --> (sAMAccountName=host/JWR-0003D.du.msad) (6) ldap: Performing search in "dc=du,dc=msad" with filter "(sAMAccountName=host/JWR-0003D.du.msad)", scope "sub" (6) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.du.msad/DC=DomainDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.du.msad/DC=ForestDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://du.msad/CN=Configuration,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (6) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (5) - Was referred to a different LDAP server (6) [ldap] = notfound (6) [expiration] = noop (6) [logintime] = noop (6) [pap] = noop (6) } # authorize = updated (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xb7afce9db2a8c39c (6) eap: Finished EAP session with state 0xb7afce9db2a8c39c (6) eap: Previous EAP request found for state 0xb7afce9db2a8c39c, released from the list (6) eap: Peer sent packet with method EAP TLS (13) (6) eap: Calling submodule eap_tls to process data (6) eap_tls: Continuing EAP-TLS (6) eap_tls: Peer ACKed our handshake fragment (6) eap_tls: [eaptls verify] = request (6) eap_tls: [eaptls process] = handled (6) eap: Sending EAP Request (code 1) ID 8 length 204 (6) eap: EAP session adding &reply:State = 0xb7afce9db1a7c39c (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) Sent Access-Challenge Id 68 from 10.2.2.118:1812 to 10.2.16.52:1812 length 0 (6) EAP-Message = 0x010800cc0d800000104a400028040305030603080708080809080a080b080408050806040105010601030303010302040205020602008c005c305a31143012060a0992268993f22c64011916046d73616431123010060a0992268993f22c64011916026475312e302c0603550403132544656c6920456e746572707269736520436572746966696361746520417574686f72697479002c302a312830260603550403131f44656c6920526f6f7420436572746966696361746520417574686f7269747916030300040e000000 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xb7afce9db1a7c39c3fdc795d563c7401 (6) Finished request Waking up in 4.7 seconds. (7) Received Access-Request Id 69 from 10.2.16.52:1812 to 10.2.2.118:1812 length 1880 (7) Framed-MTU = 1492 (7) NAS-IP-Address = 10.2.16.52 (7) NAS-Identifier = "DHP-046SW" (7) User-Name = "host/JWR-0003D.du.msad" (7) Service-Type = Framed-User (7) Framed-Protocol = PPP (7) NAS-Port = 1 (7) NAS-Port-Type = Ethernet (7) NAS-Port-Id = "1" (7) Called-Station-Id = "04-09-73-0f-8b-20" (7) Calling-Station-Id = "98-e7-f4-bb-27-2e" (7) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (7) Tunnel-Type:0 = VLAN (7) Tunnel-Medium-Type:0 = IEEE-802 (7) Tunnel-Private-Group-Id:0 = "400" (7) State = 0xb7afce9db1a7c39c3fdc795d563c7401 (7) EAP-Message = 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 (7) Message-Authenticator = 0xa41de532757ddcf68cc426536101bc50 (7) MS-RAS-Vendor = 11 (7) HP-Capability-Advert = 0x011a0000000b28 (7) HP-Capability-Advert = 0x011a0000000b2e (7) HP-Capability-Advert = 0x011a0000000b30 (7) HP-Capability-Advert = 0x011a0000000b3d (7) HP-Capability-Advert = 0x011a0000000b18 (7) HP-Capability-Advert = 0x011a0000000b19 (7) HP-Capability-Advert = 0x0138 (7) HP-Capability-Advert = 0x013a (7) HP-Capability-Advert = 0x0140 (7) HP-Capability-Advert = 0x0141 (7) HP-Capability-Advert = 0x0151 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) if (&NAS-Port-Type == Ethernet) { (7) if (&NAS-Port-Type == Ethernet) -> TRUE (7) if (&NAS-Port-Type == Ethernet) { (7) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) { (7) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) -> FALSE (7) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) { (7) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) -> FALSE (7) } # if (&NAS-Port-Type == Ethernet) = notfound (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "host/JWR-0003D.du.msad", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 8 length 1492 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) files: users: Matched entry DEFAULT at line 3 (7) [files] = ok rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (6), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (6) (7) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (7) ldap: --> (sAMAccountName=host/JWR-0003D.du.msad) (7) ldap: Performing search in "dc=du,dc=msad" with filter "(sAMAccountName=host/JWR-0003D.du.msad)", scope "sub" (7) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.du.msad/DC=DomainDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.du.msad/DC=ForestDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://du.msad/CN=Configuration,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (7) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (6) - Was referred to a different LDAP server (7) [ldap] = notfound (7) [expiration] = noop (7) [logintime] = noop (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0xb7afce9db1a7c39c (7) eap: Finished EAP session with state 0xb7afce9db1a7c39c (7) eap: Previous EAP request found for state 0xb7afce9db1a7c39c, released from the list (7) eap: Peer sent packet with method EAP TLS (13) (7) eap: Calling submodule eap_tls to process data (7) eap_tls: Continuing EAP-TLS (7) eap_tls: Peer indicated complete TLS record size will be 4361 bytes (7) eap_tls: Expecting 3 TLS record fragments (7) eap_tls: Got first TLS record fragment (1482 bytes). Peer indicated more fragments to follow (7) eap_tls: [eaptls verify] = first fragment (7) eap_tls: ACKing Peer's TLS record fragment (7) eap_tls: [eaptls process] = handled (7) eap: Sending EAP Request (code 1) ID 9 length 6 (7) eap: EAP session adding &reply:State = 0xb7afce9db0a6c39c (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) Sent Access-Challenge Id 69 from 10.2.2.118:1812 to 10.2.16.52:1812 length 0 (7) EAP-Message = 0x010900060d00 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xb7afce9db0a6c39c3fdc795d563c7401 (7) Finished request Waking up in 4.7 seconds. (8) Received Access-Request Id 70 from 10.2.16.52:1812 to 10.2.2.118:1812 length 1880 (8) Framed-MTU = 1492 (8) NAS-IP-Address = 10.2.16.52 (8) NAS-Identifier = "DHP-046SW" (8) User-Name = "host/JWR-0003D.du.msad" (8) Service-Type = Framed-User (8) Framed-Protocol = PPP (8) NAS-Port = 1 (8) NAS-Port-Type = Ethernet (8) NAS-Port-Id = "1" (8) Called-Station-Id = "04-09-73-0f-8b-20" (8) Calling-Station-Id = "98-e7-f4-bb-27-2e" (8) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (8) Tunnel-Type:0 = VLAN (8) Tunnel-Medium-Type:0 = IEEE-802 (8) Tunnel-Private-Group-Id:0 = "400" (8) State = 0xb7afce9db0a6c39c3fdc795d563c7401 (8) EAP-Message = 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 (8) Message-Authenticator = 0xd2833fa459f0bdbd7220435c662bae12 (8) MS-RAS-Vendor = 11 (8) HP-Capability-Advert = 0x011a0000000b28 (8) HP-Capability-Advert = 0x011a0000000b2e (8) HP-Capability-Advert = 0x011a0000000b30 (8) HP-Capability-Advert = 0x011a0000000b3d (8) HP-Capability-Advert = 0x011a0000000b18 (8) HP-Capability-Advert = 0x011a0000000b19 (8) HP-Capability-Advert = 0x0138 (8) HP-Capability-Advert = 0x013a (8) HP-Capability-Advert = 0x0140 (8) HP-Capability-Advert = 0x0141 (8) HP-Capability-Advert = 0x0151 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (8) authorize { (8) if (&NAS-Port-Type == Ethernet) { (8) if (&NAS-Port-Type == Ethernet) -> TRUE (8) if (&NAS-Port-Type == Ethernet) { (8) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) { (8) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) -> FALSE (8) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) { (8) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) -> FALSE (8) } # if (&NAS-Port-Type == Ethernet) = notfound (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "host/JWR-0003D.du.msad", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 9 length 1492 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) files: users: Matched entry DEFAULT at line 3 (8) [files] = ok rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (7), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (7) (8) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (8) ldap: --> (sAMAccountName=host/JWR-0003D.du.msad) (8) ldap: Performing search in "dc=du,dc=msad" with filter "(sAMAccountName=host/JWR-0003D.du.msad)", scope "sub" (8) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.du.msad/DC=DomainDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.du.msad/DC=ForestDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://du.msad/CN=Configuration,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (8) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (7) - Was referred to a different LDAP server (8) [ldap] = notfound (8) [expiration] = noop (8) [logintime] = noop (8) [pap] = noop (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0xb7afce9db0a6c39c (8) eap: Finished EAP session with state 0xb7afce9db0a6c39c (8) eap: Previous EAP request found for state 0xb7afce9db0a6c39c, released from the list (8) eap: Peer sent packet with method EAP TLS (13) (8) eap: Calling submodule eap_tls to process data (8) eap_tls: Continuing EAP-TLS (8) eap_tls: Got additional TLS record fragment (1486 bytes). Peer indicated more fragments to follow (8) eap_tls: [eaptls verify] = more fragments (8) eap_tls: ACKing Peer's TLS record fragment (8) eap_tls: [eaptls process] = handled (8) eap: Sending EAP Request (code 1) ID 10 length 6 (8) eap: EAP session adding &reply:State = 0xb7afce9dbfa5c39c (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) Challenge { ... } # empty sub-section is ignored (8) Sent Access-Challenge Id 70 from 10.2.2.118:1812 to 10.2.16.52:1812 length 0 (8) EAP-Message = 0x010a00060d00 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0xb7afce9dbfa5c39c3fdc795d563c7401 (8) Finished request Waking up in 4.7 seconds. (9) Received Access-Request Id 71 from 10.2.16.52:1812 to 10.2.2.118:1812 length 1787 (9) Framed-MTU = 1492 (9) NAS-IP-Address = 10.2.16.52 (9) NAS-Identifier = "DHP-046SW" (9) User-Name = "host/JWR-0003D.du.msad" (9) Service-Type = Framed-User (9) Framed-Protocol = PPP (9) NAS-Port = 1 (9) NAS-Port-Type = Ethernet (9) NAS-Port-Id = "1" (9) Called-Station-Id = "04-09-73-0f-8b-20" (9) Calling-Station-Id = "98-e7-f4-bb-27-2e" (9) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (9) Tunnel-Type:0 = VLAN (9) Tunnel-Medium-Type:0 = IEEE-802 (9) Tunnel-Private-Group-Id:0 = "400" (9) State = 0xb7afce9dbfa5c39c3fdc795d563c7401 (9) EAP-Message = 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 (9) Message-Authenticator = 0xc96e630640f907e02035d71773ba0724 (9) MS-RAS-Vendor = 11 (9) HP-Capability-Advert = 0x011a0000000b28 (9) HP-Capability-Advert = 0x011a0000000b2e (9) HP-Capability-Advert = 0x011a0000000b30 (9) HP-Capability-Advert = 0x011a0000000b3d (9) HP-Capability-Advert = 0x011a0000000b18 (9) HP-Capability-Advert = 0x011a0000000b19 (9) HP-Capability-Advert = 0x0138 (9) HP-Capability-Advert = 0x013a (9) HP-Capability-Advert = 0x0140 (9) HP-Capability-Advert = 0x0141 (9) HP-Capability-Advert = 0x0151 (9) session-state: No cached attributes (9) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (9) authorize { (9) if (&NAS-Port-Type == Ethernet) { (9) if (&NAS-Port-Type == Ethernet) -> TRUE (9) if (&NAS-Port-Type == Ethernet) { (9) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) { (9) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) -> FALSE (9) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) { (9) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) -> FALSE (9) } # if (&NAS-Port-Type == Ethernet) = notfound (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /@\./) { (9) if (&User-Name =~ /@\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "host/JWR-0003D.du.msad", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 10 length 1399 (9) eap: No EAP Start, assuming it's an on-going EAP conversation (9) [eap] = updated (9) files: users: Matched entry DEFAULT at line 3 (9) [files] = ok rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (8), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (8) (9) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (9) ldap: --> (sAMAccountName=host/JWR-0003D.du.msad) (9) ldap: Performing search in "dc=du,dc=msad" with filter "(sAMAccountName=host/JWR-0003D.du.msad)", scope "sub" (9) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.du.msad/DC=DomainDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.du.msad/DC=ForestDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://du.msad/CN=Configuration,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (9) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (8) - Was referred to a different LDAP server (9) [ldap] = notfound (9) [expiration] = noop (9) [logintime] = noop (9) [pap] = noop (9) } # authorize = updated (9) Found Auth-Type = eap (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0xb7afce9dbfa5c39c (9) eap: Finished EAP session with state 0xb7afce9dbfa5c39c (9) eap: Previous EAP request found for state 0xb7afce9dbfa5c39c, released from the list (9) eap: Peer sent packet with method EAP TLS (13) (9) eap: Calling submodule eap_tls to process data (9) eap_tls: Continuing EAP-TLS (9) eap_tls: Got final TLS record fragment (1393 bytes) (9) eap_tls: [eaptls verify] = ok (9) eap_tls: Done initial handshake (9) eap_tls: TLS_accept: SSLv3/TLS write server done (9) eap_tls: <<< recv TLS 1.2 [length 0e83] (9) eap_tls: TLS - Creating attributes from certificate OIDs (9) eap_tls: TLS-Cert-Serial := "1a00000002ac019647476d82fc000000000002" (9) eap_tls: TLS-Cert-Expiration := "280117122319Z" (9) eap_tls: TLS-Cert-Subject := "/DC=msad/DC=du/CN=Deli Enterprise Certificate Authority" (9) eap_tls: TLS-Cert-Issuer := "/CN=Deli Root Certificate Authority" (9) eap_tls: TLS-Cert-Common-Name := "Deli Enterprise Certificate Authority" (9) eap_tls: TLS - Creating attributes from certificate OIDs (9) eap_tls: TLS-Client-Cert-Serial := "1b00006e93fec86390ee1cd7f3000000006e93" (9) eap_tls: TLS-Client-Cert-Expiration := "210812203240Z" (9) eap_tls: TLS-Client-Cert-Subject := "/CN=JWR-0003D.du.msad" (9) eap_tls: TLS-Client-Cert-Issuer := "/DC=msad/DC=du/CN=Deli Enterprise Certificate Authority" (9) eap_tls: TLS-Client-Cert-Common-Name := "JWR-0003D.du.msad" (9) eap_tls: TLS-Client-Cert-Subject-Alt-Name-Dns := "JWR-0003D.du.msad" (9) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web Server Authentication, TLS Web Client Authentication" (9) eap_tls: TLS-Client-Cert-X509v3-Subject-Key-Identifier += "29:4C:5F:73:0C:E4:D8:31:B7:89:0E:E7:98:C5:7F:16:9A:01:37:A0" (9) eap_tls: TLS-Client-Cert-X509v3-Authority-Key-Identifier += "keyid:BE:C5:F6:58:5D:23:25:F5:60:DC:A7:BF:98:63:E9:5E:3C:DF:FA:C5\n" (9) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage-OID += "1.3.6.1.5.5.7.3.1" (9) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage-OID += "1.3.6.1.5.5.7.3.2" (9) eap_tls: TLS_accept: SSLv3/TLS read client certificate (9) eap_tls: <<< recv TLS 1.2 [length 0046] (9) eap_tls: TLS_accept: SSLv3/TLS read client key exchange (9) eap_tls: <<< recv TLS 1.2 [length 0208] (9) eap_tls: TLS_accept: SSLv3/TLS read certificate verify (9) eap_tls: TLS_accept: SSLv3/TLS read change cipher spec (9) eap_tls: <<< recv TLS 1.2 [length 0010] (9) eap_tls: TLS_accept: SSLv3/TLS read finished (9) eap_tls: >>> send TLS 1.2 [length 0001] (9) eap_tls: TLS_accept: SSLv3/TLS write change cipher spec (9) eap_tls: >>> send TLS 1.2 [length 0010] (9) eap_tls: TLS_accept: SSLv3/TLS write finished (9) eap_tls: (other): SSL negotiation finished successfully (9) eap_tls: TLS - Connection Established (9) eap_tls: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (9) eap_tls: TLS-Session-Version = "TLS 1.2" (9) eap_tls: TLS - got 51 bytes of data (9) eap_tls: [eaptls process] = handled (9) eap: Sending EAP Request (code 1) ID 11 length 61 (9) eap: EAP session adding &reply:State = 0xb7afce9dbea4c39c (9) [eap] = handled (9) } # authenticate = handled (9) Using Post-Auth-Type Challenge (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (9) Challenge { ... } # empty sub-section is ignored (9) session-state: Saving cached attributes (9) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (9) TLS-Session-Version = "TLS 1.2" (9) Sent Access-Challenge Id 71 from 10.2.2.118:1812 to 10.2.16.52:1812 length 0 (9) EAP-Message = 0x010b003d0d80000000331403030001011603030028ac162e2cf009ae2c5a6879e813fa99fc46e410eb39d5b58554549eb413937371a3e9bd8d1f8a6ffe (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) State = 0xb7afce9dbea4c39c3fdc795d563c7401 (9) Finished request Waking up in 4.6 seconds. (10) Received Access-Request Id 72 from 10.2.16.52:1812 to 10.2.2.118:1812 length 384 (10) Framed-MTU = 1492 (10) NAS-IP-Address = 10.2.16.52 (10) NAS-Identifier = "DHP-046SW" (10) User-Name = "host/JWR-0003D.du.msad" (10) Service-Type = Framed-User (10) Framed-Protocol = PPP (10) NAS-Port = 1 (10) NAS-Port-Type = Ethernet (10) NAS-Port-Id = "1" (10) Called-Station-Id = "04-09-73-0f-8b-20" (10) Calling-Station-Id = "98-e7-f4-bb-27-2e" (10) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (10) Tunnel-Type:0 = VLAN (10) Tunnel-Medium-Type:0 = IEEE-802 (10) Tunnel-Private-Group-Id:0 = "400" (10) State = 0xb7afce9dbea4c39c3fdc795d563c7401 (10) EAP-Message = 0x020b00060d00 (10) Message-Authenticator = 0x4da3b3a1d9442b4fad04eb88265c5bff (10) MS-RAS-Vendor = 11 (10) HP-Capability-Advert = 0x011a0000000b28 (10) HP-Capability-Advert = 0x011a0000000b2e (10) HP-Capability-Advert = 0x011a0000000b30 (10) HP-Capability-Advert = 0x011a0000000b3d (10) HP-Capability-Advert = 0x011a0000000b18 (10) HP-Capability-Advert = 0x011a0000000b19 (10) HP-Capability-Advert = 0x0138 (10) HP-Capability-Advert = 0x013a (10) HP-Capability-Advert = 0x0140 (10) HP-Capability-Advert = 0x0141 (10) HP-Capability-Advert = 0x0151 (10) Restoring &session-state (10) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (10) &session-state:TLS-Session-Version = "TLS 1.2" (10) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (10) authorize { (10) if (&NAS-Port-Type == Ethernet) { (10) if (&NAS-Port-Type == Ethernet) -> TRUE (10) if (&NAS-Port-Type == Ethernet) { (10) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) { (10) if (<ipv4prefix>&NAS-IP-Address == 10.2.16.0/24) -> FALSE (10) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) { (10) if (<ipv4prefix>&NAS-IP-Address == 10.2.106.0/24) -> FALSE (10) } # if (&NAS-Port-Type == Ethernet) = notfound (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /@\./) { (10) if (&User-Name =~ /@\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) [chap] = noop (10) [mschap] = noop (10) [digest] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "host/JWR-0003D.du.msad", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) eap: Peer sent EAP Response (code 2) ID 11 length 6 (10) eap: No EAP Start, assuming it's an on-going EAP conversation (10) [eap] = updated (10) files: users: Matched entry DEFAULT at line 3 (10) [files] = ok rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (9), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (9) (10) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (10) ldap: --> (sAMAccountName=host/JWR-0003D.du.msad) (10) ldap: Performing search in "dc=du,dc=msad" with filter "(sAMAccountName=host/JWR-0003D.du.msad)", scope "sub" (10) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.du.msad/DC=DomainDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.du.msad/DC=ForestDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://du.msad/CN=Configuration,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (10) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (9) - Was referred to a different LDAP server (10) [ldap] = notfound (10) [expiration] = noop (10) [logintime] = noop (10) [pap] = noop (10) } # authorize = updated (10) Found Auth-Type = eap (10) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (10) authenticate { (10) eap: Expiring EAP session with state 0xb7afce9dbea4c39c (10) eap: Finished EAP session with state 0xb7afce9dbea4c39c (10) eap: Previous EAP request found for state 0xb7afce9dbea4c39c, released from the list (10) eap: Peer sent packet with method EAP TLS (13) (10) eap: Calling submodule eap_tls to process data (10) eap_tls: Continuing EAP-TLS (10) eap_tls: Peer ACKed our handshake fragment. handshake is finished (10) eap_tls: [eaptls verify] = success (10) eap_tls: [eaptls process] = success (10) eap: Sending EAP Success (code 3) ID 11 length 4 (10) eap: Freeing handler (10) [eap] = ok (10) } # authenticate = ok (10) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (10) post-auth { (10) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (10) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (10) update { (10) &reply::TLS-Session-Cipher-Suite += &session-state:TLS-Session-Cipher-Suite[*] -> 'ECDHE-RSA-AES256-GCM-SHA384' (10) &reply::TLS-Session-Version += &session-state:TLS-Session-Version[*] -> 'TLS 1.2' (10) } # update = noop (10) [exec] = noop (10) policy remove_reply_message_if_eap { (10) if (&reply:EAP-Message && &reply:Reply-Message) { (10) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (10) else { (10) [noop] = noop (10) } # else = noop (10) } # policy remove_reply_message_if_eap = noop (10) } # post-auth = noop (10) Login OK: [host/JWR-0003D.du.msad] (from client STADHUISPLEIN-ACCESS-SWITCHES port 1 cli 98-e7-f4-bb-27-2e) (10) Sent Access-Accept Id 72 from 10.2.2.118:1812 to 10.2.16.52:1812 length 0 (10) MS-MPPE-Recv-Key = 0x7f555362036914b7129ebcc6285e0c09bf0feebb9ba8d8450f52097926a1dcb6 (10) MS-MPPE-Send-Key = 0x7ad729cc57fbeef90e58d58b323e8d28792db977818e62ef5d66ce70f02a69d0 (10) EAP-Message = 0x030b0004 (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) User-Name = "host/JWR-0003D.du.msad" (10) Finished request Waking up in 4.6 seconds. (0) Cleaning up request packet ID 62 with timestamp +37 (1) Cleaning up request packet ID 63 with timestamp +37 (2) Cleaning up request packet ID 64 with timestamp +37 (3) Cleaning up request packet ID 65 with timestamp +37 (4) Cleaning up request packet ID 66 with timestamp +37 (5) Cleaning up request packet ID 67 with timestamp +37 (6) Cleaning up request packet ID 68 with timestamp +37 (7) Cleaning up request packet ID 69 with timestamp +37 (8) Cleaning up request packet ID 70 with timestamp +37 (9) Cleaning up request packet ID 71 with timestamp +37 (10) Cleaning up request packet ID 72 with timestamp +37 Ready to process requests Please let me know what is wrong. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html |
|
|
On Mar 22, 2021, at 5:05 PM, Max Elzinga <[hidden email]> wrote:
> > Hi Alan, > > Here is the log file: So... you're not going to read it, to see if it's applying the rules you added? Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html |
|
|
> On Mar 22, 2021, at 10:03 PM, Alan DeKok <[hidden email]> wrote: > > On Mar 22, 2021, at 5:05 PM, Max Elzinga <[hidden email]> wrote: >> >> Hi Alan, >> >> Here is the log file: > > So... you're not going to read it, to see if it's applying the rules you added? Unless the code in v3.0.x differs to master, the operator would be '<' i.e. LHS is within the set on the RHS. The cast would turn the LHS into a 32bit prefix which isn't going to match the RHS which is a 24bit prefix, so '==' won't work. The condition should be: if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) { I can never remember the IP address comparison operators either. -Arran - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html |
signature.asc (849 bytes) |
|
Hi Arran and Alan,
I was thinking exactly the same about the LHS into a 32bit prefix and it didn’t match the RHS with a 24bit prefix.. j/k But changing the operator from '==' to '<' is working! Thanks! Met vriendelijke groet, Max - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html |
|
|
In reply to this post by arr2036
Am 23.03.21 um 01:18 schrieb Arran Cudbard-Bell:
> Unless the code in v3.0.x differs to master, the operator would be '<' i.e. LHS is within the set on the RHS The users file is ancient and surely doomed in 4.0, but the following does work for us in 3.0.21 (and previous): DEFAULT NAS-IP-Address > 192.168.40.0, NAS-IP-Address < 192.168.40.16, NAS-Identifier == "My-NAS-Name" Tunnel-Private-Group-ID = <VLAN-ID> Tunnel-Medium-Type = 802 So the check items create a simple AND condition. You do want narrow conditions for VLAN assignment as a mistake in this place could really upend your VLAN-based security concept. (Unlang does the same and much more, of course.) Cheers, Martin -- Dr. Martin Pauly Phone: +49-6421-28-23527 HRZ Univ. Marburg Fax: +49-6421-28-26994 Hans-Meerwein-Str. E-Mail: [hidden email] D-35032 Marburg - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html |
|
|
Hello,
I am currently testing and it seems like some networks are working, and some don’t work. For example the 10.2.16.0/24 is working, but 10.2.146.0/24 seems to be ignored. Example: (10) if (&NAS-Port-Type == Ethernet) { (10) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) { (10) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) -> FALSE (10) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) { (10) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) -> FALSE (10) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) { (10) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) -> FALSE (10) } # if (&NAS-Port-Type == Ethernet) = notfound ***** (10) Sent Access-Accept Id 231 from 10.2.2.118:1812 to 10.2.146.43:1812 length 0 Any idea what is going wrong? Full log: FreeRADIUS Version 3.0.20 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/eap including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client STADHUISPLEIN-ACCESSPOINT01 { ipaddr = 10.2.16.9 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client STADHUISPLEIN-ACCESS-SWITCHES { ipaddr = 10.2.16.0/23 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client *-TERREIN07-ACCESS-SWITCHES { ipaddr = 10.2.106.0/24 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client *-TERREIN11-ACCESS-SWITCHES { ipaddr = 10.2.146.0/24 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = ntlm_auth # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=DU-MSDOM --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --domain=DU-MSDOM --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}" passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "10.2.2.101" identity = "CN=svc_freeradius,OU=Service Accounts,OU=Users,OU=****,DC=du,DC=msad" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=du,dc=msad" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } instantiate { } # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): authenticating by calling 'ntlm_auth' # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize [/etc/freeradius/3.0/mods-config/files/authorize]:1 Changing 'NAS-Port-Type =' to 'NAS-Port-Type ==' for comparing RADIUS attribute in check item list for user DEFAULT [/etc/freeradius/3.0/mods-config/files/authorize]:3 Changing 'NAS-Port-Type =' to 'NAS-Port-Type ==' for comparing RADIUS attribute in check item list for user DEFAULT [/etc/freeradius/3.0/mods-config/files/authorize]:20 Changing 'NAS-Port-Type =' to 'NAS-Port-Type ==' for comparing RADIUS attribute in check item list for user DEFAULT reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20449 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/freeradius/3.0/certs/serverkey.pem" certificate_file = "/etc/freeradius/3.0/certs/server.pem" ca_file = "/etc/freeradius/3.0/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "1.3" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } The configuration allows TLS 1.0 and/or TLS 1.1. We STRONGLY recommned using only TLS 1.2 for security Please set: min_tls_version = "1.2" # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:353 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 41155 Listening on proxy address :: port 43258 Ready to process requests (0) Received Access-Request Id 221 from 10.2.146.43:1812 to 10.2.2.118:1812 length 388 (0) Framed-MTU = 1480 (0) NAS-IP-Address = 172.19.100.107 (0) NAS-Identifier = "DHP-043SW" (0) User-Name = "host/DHP-0039D.du.msad" (0) Service-Type = Framed-User (0) Framed-Protocol = PPP (0) NAS-Port = 14 (0) NAS-Port-Type = Ethernet (0) NAS-Port-Id = "14" (0) Called-Station-Id = "20-67-7c-21-8a-80" (0) Calling-Station-Id = "10-e7-c6-05-2a-7e" (0) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (0) Tunnel-Type:0 = VLAN (0) Tunnel-Medium-Type:0 = IEEE-802 (0) Tunnel-Private-Group-Id:0 = "411" (0) EAP-Message = 0x0201001b01686f73742f4448502d30303339442e64752e6d736164 (0) Message-Authenticator = 0xf88e35c60f185faccd606c79229c5de7 (0) MS-RAS-Vendor = 11 (0) HP-Capability-Advert = 0x011a0000000b28 (0) HP-Capability-Advert = 0x011a0000000b2e (0) HP-Capability-Advert = 0x011a0000000b30 (0) HP-Capability-Advert = 0x011a0000000b3d (0) HP-Capability-Advert = 0x011a0000000b18 (0) HP-Capability-Advert = 0x011a0000000b19 (0) HP-Capability-Advert = 0x0138 (0) HP-Capability-Advert = 0x013a (0) HP-Capability-Advert = 0x0140 (0) HP-Capability-Advert = 0x0141 (0) HP-Capability-Advert = 0x0151 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) if (&NAS-Port-Type == Ethernet) { (0) if (&NAS-Port-Type == Ethernet) -> TRUE (0) if (&NAS-Port-Type == Ethernet) { (0) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) { (0) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) -> FALSE (0) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) { (0) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) -> FALSE (0) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) { (0) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) -> FALSE (0) } # if (&NAS-Port-Type == Ethernet) = notfound (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "host/DHP-0039D.du.msad", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 1 length 27 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_peap to process data (0) eap_peap: Initiating new TLS session (0) eap_peap: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 2 length 6 (0) eap: EAP session adding &reply:State = 0xf763e6b4f761ff8c (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 221 from 10.2.2.118:1812 to 10.2.146.43:1812 length 0 (0) EAP-Message = 0x010200061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xf763e6b4f761ff8c262be553bb4e34a0 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 222 from 10.2.146.43:1812 to 10.2.2.118:1812 length 385 (1) Framed-MTU = 1480 (1) NAS-IP-Address = 172.19.100.107 (1) NAS-Identifier = "DHP-043SW" (1) User-Name = "host/DHP-0039D.du.msad" (1) Service-Type = Framed-User (1) Framed-Protocol = PPP (1) NAS-Port = 14 (1) NAS-Port-Type = Ethernet (1) NAS-Port-Id = "14" (1) Called-Station-Id = "20-67-7c-21-8a-80" (1) Calling-Station-Id = "10-e7-c6-05-2a-7e" (1) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (1) Tunnel-Type:0 = VLAN (1) Tunnel-Medium-Type:0 = IEEE-802 (1) Tunnel-Private-Group-Id:0 = "411" (1) State = 0xf763e6b4f761ff8c262be553bb4e34a0 (1) EAP-Message = 0x02020006030d (1) Message-Authenticator = 0x345a487eed390ef0b36fb555990bf908 (1) MS-RAS-Vendor = 11 (1) HP-Capability-Advert = 0x011a0000000b28 (1) HP-Capability-Advert = 0x011a0000000b2e (1) HP-Capability-Advert = 0x011a0000000b30 (1) HP-Capability-Advert = 0x011a0000000b3d (1) HP-Capability-Advert = 0x011a0000000b18 (1) HP-Capability-Advert = 0x011a0000000b19 (1) HP-Capability-Advert = 0x0138 (1) HP-Capability-Advert = 0x013a (1) HP-Capability-Advert = 0x0140 (1) HP-Capability-Advert = 0x0141 (1) HP-Capability-Advert = 0x0151 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) if (&NAS-Port-Type == Ethernet) { (1) if (&NAS-Port-Type == Ethernet) -> TRUE (1) if (&NAS-Port-Type == Ethernet) { (1) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) { (1) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) -> FALSE (1) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) { (1) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) -> FALSE (1) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) { (1) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) -> FALSE (1) } # if (&NAS-Port-Type == Ethernet) = notfound (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "host/DHP-0039D.du.msad", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 2 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) files: users: Matched entry DEFAULT at line 3 (1) [files] = ok rlm_ldap (ldap): Closing connection (0): Hit idle_timeout, was idle for 68 seconds rlm_ldap (ldap): Closing connection (1): Hit idle_timeout, was idle for 68 seconds rlm_ldap (ldap): Closing connection (2): Hit idle_timeout, was idle for 68 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing connection (3): Hit idle_timeout, was idle for 68 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing connection (4): Hit idle_timeout, was idle for 68 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (5), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (5) (1) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (1) ldap: --> (sAMAccountName=host/DHP-0039D.du.msad) (1) ldap: Performing search in "dc=du,dc=msad" with filter "(sAMAccountName=host/DHP-0039D.du.msad)", scope "sub" (1) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.du.msad/DC=DomainDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.du.msad/DC=ForestDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://du.msad/CN=Configuration,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (1) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (5) - Was referred to a different LDAP server Need 3 more connections to reach min connections (3) rlm_ldap (ldap): Opening additional connection (6), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (1) [ldap] = notfound (1) [expiration] = noop (1) [logintime] = noop Not doing PAP as Auth-Type is already set. (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xf763e6b4f761ff8c (1) eap: Finished EAP session with state 0xf763e6b4f761ff8c (1) eap: Previous EAP request found for state 0xf763e6b4f761ff8c, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type TLS (13) (1) eap: Calling submodule eap_tls to process data (1) eap_tls: Initiating new TLS session (1) eap_tls: Setting verify mode to require certificate from client (1) eap_tls: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 3 length 6 (1) eap: EAP session adding &reply:State = 0xf763e6b4f660eb8c (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 222 from 10.2.2.118:1812 to 10.2.146.43:1812 length 0 (1) EAP-Message = 0x010300060d20 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xf763e6b4f660eb8c262be553bb4e34a0 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 223 from 10.2.146.43:1812 to 10.2.2.118:1812 length 545 (2) Framed-MTU = 1480 (2) NAS-IP-Address = 172.19.100.107 (2) NAS-Identifier = "DHP-043SW" (2) User-Name = "host/DHP-0039D.du.msad" (2) Service-Type = Framed-User (2) Framed-Protocol = PPP (2) NAS-Port = 14 (2) NAS-Port-Type = Ethernet (2) NAS-Port-Id = "14" (2) Called-Station-Id = "20-67-7c-21-8a-80" (2) Calling-Station-Id = "10-e7-c6-05-2a-7e" (2) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (2) Tunnel-Type:0 = VLAN (2) Tunnel-Medium-Type:0 = IEEE-802 (2) Tunnel-Private-Group-Id:0 = "411" (2) State = 0xf763e6b4f660eb8c262be553bb4e34a0 (2) EAP-Message = 0x020300a60d800000009c16030300970100009303036059b70e53c27cd5ce5e695b025b36ed1566ece334f1402bb2ed9ac3e68736d600002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a01000040000500050100000000000a00080006001d00170018000b00020100000d001400120401050102010403050302030202060106030023000000170000ff01000100 (2) Message-Authenticator = 0x89a7d011a65766097c7fc6e366fd7264 (2) MS-RAS-Vendor = 11 (2) HP-Capability-Advert = 0x011a0000000b28 (2) HP-Capability-Advert = 0x011a0000000b2e (2) HP-Capability-Advert = 0x011a0000000b30 (2) HP-Capability-Advert = 0x011a0000000b3d (2) HP-Capability-Advert = 0x011a0000000b18 (2) HP-Capability-Advert = 0x011a0000000b19 (2) HP-Capability-Advert = 0x0138 (2) HP-Capability-Advert = 0x013a (2) HP-Capability-Advert = 0x0140 (2) HP-Capability-Advert = 0x0141 (2) HP-Capability-Advert = 0x0151 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) if (&NAS-Port-Type == Ethernet) { (2) if (&NAS-Port-Type == Ethernet) -> TRUE (2) if (&NAS-Port-Type == Ethernet) { (2) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) { (2) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) -> FALSE (2) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) { (2) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) -> FALSE (2) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) { (2) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) -> FALSE (2) } # if (&NAS-Port-Type == Ethernet) = notfound (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "host/DHP-0039D.du.msad", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 3 length 166 (2) eap: No EAP Start, assuming it's an on-going EAP conversation (2) [eap] = updated (2) files: users: Matched entry DEFAULT at line 3 (2) [files] = ok rlm_ldap (ldap): Reserved connection (6) (2) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (2) ldap: --> (sAMAccountName=host/DHP-0039D.du.msad) (2) ldap: Performing search in "dc=du,dc=msad" with filter "(sAMAccountName=host/DHP-0039D.du.msad)", scope "sub" (2) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.du.msad/DC=DomainDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.du.msad/DC=ForestDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://du.msad/CN=Configuration,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (2) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (6) - Was referred to a different LDAP server Need 3 more connections to reach min connections (3) rlm_ldap (ldap): Opening additional connection (7), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (2) [ldap] = notfound (2) [expiration] = noop (2) [logintime] = noop (2) [pap] = noop (2) } # authorize = updated (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xf763e6b4f660eb8c (2) eap: Finished EAP session with state 0xf763e6b4f660eb8c (2) eap: Previous EAP request found for state 0xf763e6b4f660eb8c, released from the list (2) eap: Peer sent packet with method EAP TLS (13) (2) eap: Calling submodule eap_tls to process data (2) eap_tls: Continuing EAP-TLS (2) eap_tls: Peer indicated complete TLS record size will be 156 bytes (2) eap_tls: Got complete TLS record (156 bytes) (2) eap_tls: [eaptls verify] = length included (2) eap_tls: (other): before SSL initialization (2) eap_tls: TLS_accept: before SSL initialization (2) eap_tls: TLS_accept: before SSL initialization (2) eap_tls: <<< recv TLS 1.3 [length 0097] (2) eap_tls: TLS_accept: SSLv3/TLS read client hello (2) eap_tls: >>> send TLS 1.2 [length 003d] (2) eap_tls: TLS_accept: SSLv3/TLS write server hello (2) eap_tls: >>> send TLS 1.2 [length 0de3] (2) eap_tls: TLS_accept: SSLv3/TLS write certificate (2) eap_tls: >>> send TLS 1.2 [length 014d] (2) eap_tls: TLS_accept: SSLv3/TLS write key exchange (2) eap_tls: >>> send TLS 1.2 [length 00c0] (2) eap_tls: TLS_accept: SSLv3/TLS write certificate request (2) eap_tls: >>> send TLS 1.2 [length 0004] (2) eap_tls: TLS_accept: SSLv3/TLS write server done (2) eap_tls: TLS_accept: Need to read more data: SSLv3/TLS write server done (2) eap_tls: TLS - In Handshake Phase (2) eap_tls: TLS - got 4170 bytes of data (2) eap_tls: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 4 length 1004 (2) eap: EAP session adding &reply:State = 0xf763e6b4f567eb8c (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 223 from 10.2.2.118:1812 to 10.2.146.43:1812 length 0 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xf763e6b4f567eb8c262be553bb4e34a0 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 224 from 10.2.146.43:1812 to 10.2.2.118:1812 length 385 (3) Framed-MTU = 1480 (3) NAS-IP-Address = 172.19.100.107 (3) NAS-Identifier = "DHP-043SW" (3) User-Name = "host/DHP-0039D.du.msad" (3) Service-Type = Framed-User (3) Framed-Protocol = PPP (3) NAS-Port = 14 (3) NAS-Port-Type = Ethernet (3) NAS-Port-Id = "14" (3) Called-Station-Id = "20-67-7c-21-8a-80" (3) Calling-Station-Id = "10-e7-c6-05-2a-7e" (3) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (3) Tunnel-Type:0 = VLAN (3) Tunnel-Medium-Type:0 = IEEE-802 (3) Tunnel-Private-Group-Id:0 = "411" (3) State = 0xf763e6b4f567eb8c262be553bb4e34a0 (3) EAP-Message = 0x020400060d00 (3) Message-Authenticator = 0x5cfd6a198f52e1a7928d93e034fb0b9d (3) MS-RAS-Vendor = 11 (3) HP-Capability-Advert = 0x011a0000000b28 (3) HP-Capability-Advert = 0x011a0000000b2e (3) HP-Capability-Advert = 0x011a0000000b30 (3) HP-Capability-Advert = 0x011a0000000b3d (3) HP-Capability-Advert = 0x011a0000000b18 (3) HP-Capability-Advert = 0x011a0000000b19 (3) HP-Capability-Advert = 0x0138 (3) HP-Capability-Advert = 0x013a (3) HP-Capability-Advert = 0x0140 (3) HP-Capability-Advert = 0x0141 (3) HP-Capability-Advert = 0x0151 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) if (&NAS-Port-Type == Ethernet) { (3) if (&NAS-Port-Type == Ethernet) -> TRUE (3) if (&NAS-Port-Type == Ethernet) { (3) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) { (3) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) -> FALSE (3) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) { (3) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) -> FALSE (3) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) { (3) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) -> FALSE (3) } # if (&NAS-Port-Type == Ethernet) = notfound (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "host/DHP-0039D.du.msad", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 4 length 6 (3) eap: No EAP Start, assuming it's an on-going EAP conversation (3) [eap] = updated (3) files: users: Matched entry DEFAULT at line 3 (3) [files] = ok rlm_ldap (ldap): Reserved connection (7) (3) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (3) ldap: --> (sAMAccountName=host/DHP-0039D.du.msad) (3) ldap: Performing search in "dc=du,dc=msad" with filter "(sAMAccountName=host/DHP-0039D.du.msad)", scope "sub" (3) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.du.msad/DC=DomainDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.du.msad/DC=ForestDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://du.msad/CN=Configuration,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (3) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (7) - Was referred to a different LDAP server (3) [ldap] = notfound (3) [expiration] = noop (3) [logintime] = noop (3) [pap] = noop (3) } # authorize = updated (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xf763e6b4f567eb8c (3) eap: Finished EAP session with state 0xf763e6b4f567eb8c (3) eap: Previous EAP request found for state 0xf763e6b4f567eb8c, released from the list (3) eap: Peer sent packet with method EAP TLS (13) (3) eap: Calling submodule eap_tls to process data (3) eap_tls: Continuing EAP-TLS (3) eap_tls: Peer ACKed our handshake fragment (3) eap_tls: [eaptls verify] = request (3) eap_tls: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 5 length 1004 (3) eap: EAP session adding &reply:State = 0xf763e6b4f466eb8c (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 224 from 10.2.2.118:1812 to 10.2.146.43:1812 length 0 (3) EAP-Message = 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 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xf763e6b4f466eb8c262be553bb4e34a0 (3) Finished request Waking up in 4.8 seconds. (4) Received Access-Request Id 225 from 10.2.146.43:1812 to 10.2.2.118:1812 length 385 (4) Framed-MTU = 1480 (4) NAS-IP-Address = 172.19.100.107 (4) NAS-Identifier = "DHP-043SW" (4) User-Name = "host/DHP-0039D.du.msad" (4) Service-Type = Framed-User (4) Framed-Protocol = PPP (4) NAS-Port = 14 (4) NAS-Port-Type = Ethernet (4) NAS-Port-Id = "14" (4) Called-Station-Id = "20-67-7c-21-8a-80" (4) Calling-Station-Id = "10-e7-c6-05-2a-7e" (4) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (4) Tunnel-Type:0 = VLAN (4) Tunnel-Medium-Type:0 = IEEE-802 (4) Tunnel-Private-Group-Id:0 = "411" (4) State = 0xf763e6b4f466eb8c262be553bb4e34a0 (4) EAP-Message = 0x020500060d00 (4) Message-Authenticator = 0x819fb2f8fad1d335ee2155c31669d2c3 (4) MS-RAS-Vendor = 11 (4) HP-Capability-Advert = 0x011a0000000b28 (4) HP-Capability-Advert = 0x011a0000000b2e (4) HP-Capability-Advert = 0x011a0000000b30 (4) HP-Capability-Advert = 0x011a0000000b3d (4) HP-Capability-Advert = 0x011a0000000b18 (4) HP-Capability-Advert = 0x011a0000000b19 (4) HP-Capability-Advert = 0x0138 (4) HP-Capability-Advert = 0x013a (4) HP-Capability-Advert = 0x0140 (4) HP-Capability-Advert = 0x0141 (4) HP-Capability-Advert = 0x0151 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) if (&NAS-Port-Type == Ethernet) { (4) if (&NAS-Port-Type == Ethernet) -> TRUE (4) if (&NAS-Port-Type == Ethernet) { (4) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) { (4) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) -> FALSE (4) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) { (4) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) -> FALSE (4) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) { (4) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) -> FALSE (4) } # if (&NAS-Port-Type == Ethernet) = notfound (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "host/DHP-0039D.du.msad", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 5 length 6 (4) eap: No EAP Start, assuming it's an on-going EAP conversation (4) [eap] = updated (4) files: users: Matched entry DEFAULT at line 3 (4) [files] = ok rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (8), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (8) (4) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (4) ldap: --> (sAMAccountName=host/DHP-0039D.du.msad) (4) ldap: Performing search in "dc=du,dc=msad" with filter "(sAMAccountName=host/DHP-0039D.du.msad)", scope "sub" (4) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.du.msad/DC=DomainDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.du.msad/DC=ForestDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://du.msad/CN=Configuration,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (4) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (8) - Was referred to a different LDAP server (4) [ldap] = notfound (4) [expiration] = noop (4) [logintime] = noop (4) [pap] = noop (4) } # authorize = updated (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xf763e6b4f466eb8c (4) eap: Finished EAP session with state 0xf763e6b4f466eb8c (4) eap: Previous EAP request found for state 0xf763e6b4f466eb8c, released from the list (4) eap: Peer sent packet with method EAP TLS (13) (4) eap: Calling submodule eap_tls to process data (4) eap_tls: Continuing EAP-TLS (4) eap_tls: Peer ACKed our handshake fragment (4) eap_tls: [eaptls verify] = request (4) eap_tls: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 6 length 1004 (4) eap: EAP session adding &reply:State = 0xf763e6b4f365eb8c (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 225 from 10.2.2.118:1812 to 10.2.146.43:1812 length 0 (4) EAP-Message = 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 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xf763e6b4f365eb8c262be553bb4e34a0 (4) Finished request Waking up in 4.8 seconds. (5) Received Access-Request Id 226 from 10.2.146.43:1812 to 10.2.2.118:1812 length 385 (5) Framed-MTU = 1480 (5) NAS-IP-Address = 172.19.100.107 (5) NAS-Identifier = "DHP-043SW" (5) User-Name = "host/DHP-0039D.du.msad" (5) Service-Type = Framed-User (5) Framed-Protocol = PPP (5) NAS-Port = 14 (5) NAS-Port-Type = Ethernet (5) NAS-Port-Id = "14" (5) Called-Station-Id = "20-67-7c-21-8a-80" (5) Calling-Station-Id = "10-e7-c6-05-2a-7e" (5) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (5) Tunnel-Type:0 = VLAN (5) Tunnel-Medium-Type:0 = IEEE-802 (5) Tunnel-Private-Group-Id:0 = "411" (5) State = 0xf763e6b4f365eb8c262be553bb4e34a0 (5) EAP-Message = 0x020600060d00 (5) Message-Authenticator = 0x6a909367f95c891c0653ead6179a16d8 (5) MS-RAS-Vendor = 11 (5) HP-Capability-Advert = 0x011a0000000b28 (5) HP-Capability-Advert = 0x011a0000000b2e (5) HP-Capability-Advert = 0x011a0000000b30 (5) HP-Capability-Advert = 0x011a0000000b3d (5) HP-Capability-Advert = 0x011a0000000b18 (5) HP-Capability-Advert = 0x011a0000000b19 (5) HP-Capability-Advert = 0x0138 (5) HP-Capability-Advert = 0x013a (5) HP-Capability-Advert = 0x0140 (5) HP-Capability-Advert = 0x0141 (5) HP-Capability-Advert = 0x0151 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) if (&NAS-Port-Type == Ethernet) { (5) if (&NAS-Port-Type == Ethernet) -> TRUE (5) if (&NAS-Port-Type == Ethernet) { (5) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) { (5) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) -> FALSE (5) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) { (5) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) -> FALSE (5) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) { (5) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) -> FALSE (5) } # if (&NAS-Port-Type == Ethernet) = notfound (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "host/DHP-0039D.du.msad", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 6 length 6 (5) eap: No EAP Start, assuming it's an on-going EAP conversation (5) [eap] = updated (5) files: users: Matched entry DEFAULT at line 3 (5) [files] = ok rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (9), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (9) (5) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (5) ldap: --> (sAMAccountName=host/DHP-0039D.du.msad) (5) ldap: Performing search in "dc=du,dc=msad" with filter "(sAMAccountName=host/DHP-0039D.du.msad)", scope "sub" (5) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.du.msad/DC=DomainDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.du.msad/DC=ForestDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://du.msad/CN=Configuration,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (5) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (9) - Was referred to a different LDAP server (5) [ldap] = notfound (5) [expiration] = noop (5) [logintime] = noop (5) [pap] = noop (5) } # authorize = updated (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xf763e6b4f365eb8c (5) eap: Finished EAP session with state 0xf763e6b4f365eb8c (5) eap: Previous EAP request found for state 0xf763e6b4f365eb8c, released from the list (5) eap: Peer sent packet with method EAP TLS (13) (5) eap: Calling submodule eap_tls to process data (5) eap_tls: Continuing EAP-TLS (5) eap_tls: Peer ACKed our handshake fragment (5) eap_tls: [eaptls verify] = request (5) eap_tls: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 7 length 1004 (5) eap: EAP session adding &reply:State = 0xf763e6b4f264eb8c (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 226 from 10.2.2.118:1812 to 10.2.146.43:1812 length 0 (5) EAP-Message = 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 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xf763e6b4f264eb8c262be553bb4e34a0 (5) Finished request Waking up in 4.8 seconds. (6) Received Access-Request Id 227 from 10.2.146.43:1812 to 10.2.2.118:1812 length 385 (6) Framed-MTU = 1480 (6) NAS-IP-Address = 172.19.100.107 (6) NAS-Identifier = "DHP-043SW" (6) User-Name = "host/DHP-0039D.du.msad" (6) Service-Type = Framed-User (6) Framed-Protocol = PPP (6) NAS-Port = 14 (6) NAS-Port-Type = Ethernet (6) NAS-Port-Id = "14" (6) Called-Station-Id = "20-67-7c-21-8a-80" (6) Calling-Station-Id = "10-e7-c6-05-2a-7e" (6) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (6) Tunnel-Type:0 = VLAN (6) Tunnel-Medium-Type:0 = IEEE-802 (6) Tunnel-Private-Group-Id:0 = "411" (6) State = 0xf763e6b4f264eb8c262be553bb4e34a0 (6) EAP-Message = 0x020700060d00 (6) Message-Authenticator = 0x4417881373ea9ebb1d567d9c2622670b (6) MS-RAS-Vendor = 11 (6) HP-Capability-Advert = 0x011a0000000b28 (6) HP-Capability-Advert = 0x011a0000000b2e (6) HP-Capability-Advert = 0x011a0000000b30 (6) HP-Capability-Advert = 0x011a0000000b3d (6) HP-Capability-Advert = 0x011a0000000b18 (6) HP-Capability-Advert = 0x011a0000000b19 (6) HP-Capability-Advert = 0x0138 (6) HP-Capability-Advert = 0x013a (6) HP-Capability-Advert = 0x0140 (6) HP-Capability-Advert = 0x0141 (6) HP-Capability-Advert = 0x0151 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) if (&NAS-Port-Type == Ethernet) { (6) if (&NAS-Port-Type == Ethernet) -> TRUE (6) if (&NAS-Port-Type == Ethernet) { (6) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) { (6) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) -> FALSE (6) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) { (6) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) -> FALSE (6) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) { (6) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) -> FALSE (6) } # if (&NAS-Port-Type == Ethernet) = notfound (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "host/DHP-0039D.du.msad", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 7 length 6 (6) eap: No EAP Start, assuming it's an on-going EAP conversation (6) [eap] = updated (6) files: users: Matched entry DEFAULT at line 3 (6) [files] = ok rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (10), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (10) (6) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (6) ldap: --> (sAMAccountName=host/DHP-0039D.du.msad) (6) ldap: Performing search in "dc=du,dc=msad" with filter "(sAMAccountName=host/DHP-0039D.du.msad)", scope "sub" (6) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.du.msad/DC=DomainDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.du.msad/DC=ForestDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://du.msad/CN=Configuration,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (6) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (10) - Was referred to a different LDAP server (6) [ldap] = notfound (6) [expiration] = noop (6) [logintime] = noop (6) [pap] = noop (6) } # authorize = updated (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xf763e6b4f264eb8c (6) eap: Finished EAP session with state 0xf763e6b4f264eb8c (6) eap: Previous EAP request found for state 0xf763e6b4f264eb8c, released from the list (6) eap: Peer sent packet with method EAP TLS (13) (6) eap: Calling submodule eap_tls to process data (6) eap_tls: Continuing EAP-TLS (6) eap_tls: Peer ACKed our handshake fragment (6) eap_tls: [eaptls verify] = request (6) eap_tls: [eaptls process] = handled (6) eap: Sending EAP Request (code 1) ID 8 length 204 (6) eap: EAP session adding &reply:State = 0xf763e6b4f16beb8c (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) Sent Access-Challenge Id 227 from 10.2.2.118:1812 to 10.2.146.43:1812 length 0 (6) EAP-Message = 0x010800cc0d800000104a400028040305030603080708080809080a080b080408050806040105010601030303010302040205020602008c005c305a31143012060a0992268993f22c64011916046d73616431123010060a0992268993f22c64011916026475312e302c0603550403132544656c6920456e746572707269736520436572746966696361746520417574686f72697479002c302a312830260603550403131f44656c6920526f6f7420436572746966696361746520417574686f7269747916030300040e000000 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xf763e6b4f16beb8c262be553bb4e34a0 (6) Finished request Waking up in 4.7 seconds. (7) Received Access-Request Id 228 from 10.2.146.43:1812 to 10.2.2.118:1812 length 1881 (7) Framed-MTU = 1480 (7) NAS-IP-Address = 172.19.100.107 (7) NAS-Identifier = "DHP-043SW" (7) User-Name = "host/DHP-0039D.du.msad" (7) Service-Type = Framed-User (7) Framed-Protocol = PPP (7) NAS-Port = 14 (7) NAS-Port-Type = Ethernet (7) NAS-Port-Id = "14" (7) Called-Station-Id = "20-67-7c-21-8a-80" (7) Calling-Station-Id = "10-e7-c6-05-2a-7e" (7) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (7) Tunnel-Type:0 = VLAN (7) Tunnel-Medium-Type:0 = IEEE-802 (7) Tunnel-Private-Group-Id:0 = "411" (7) State = 0xf763e6b4f16beb8c262be553bb4e34a0 (7) EAP-Message = 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 (7) Message-Authenticator = 0xe605d983b227b1e253482f705977edf1 (7) MS-RAS-Vendor = 11 (7) HP-Capability-Advert = 0x011a0000000b28 (7) HP-Capability-Advert = 0x011a0000000b2e (7) HP-Capability-Advert = 0x011a0000000b30 (7) HP-Capability-Advert = 0x011a0000000b3d (7) HP-Capability-Advert = 0x011a0000000b18 (7) HP-Capability-Advert = 0x011a0000000b19 (7) HP-Capability-Advert = 0x0138 (7) HP-Capability-Advert = 0x013a (7) HP-Capability-Advert = 0x0140 (7) HP-Capability-Advert = 0x0141 (7) HP-Capability-Advert = 0x0151 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) if (&NAS-Port-Type == Ethernet) { (7) if (&NAS-Port-Type == Ethernet) -> TRUE (7) if (&NAS-Port-Type == Ethernet) { (7) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) { (7) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) -> FALSE (7) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) { (7) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) -> FALSE (7) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) { (7) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) -> FALSE (7) } # if (&NAS-Port-Type == Ethernet) = notfound (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "host/DHP-0039D.du.msad", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 8 length 1492 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) files: users: Matched entry DEFAULT at line 3 (7) [files] = ok rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (11), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (11) (7) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (7) ldap: --> (sAMAccountName=host/DHP-0039D.du.msad) (7) ldap: Performing search in "dc=du,dc=msad" with filter "(sAMAccountName=host/DHP-0039D.du.msad)", scope "sub" (7) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.du.msad/DC=DomainDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.du.msad/DC=ForestDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://du.msad/CN=Configuration,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (7) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (11) - Was referred to a different LDAP server (7) [ldap] = notfound (7) [expiration] = noop (7) [logintime] = noop (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0xf763e6b4f16beb8c (7) eap: Finished EAP session with state 0xf763e6b4f16beb8c (7) eap: Previous EAP request found for state 0xf763e6b4f16beb8c, released from the list (7) eap: Peer sent packet with method EAP TLS (13) (7) eap: Calling submodule eap_tls to process data (7) eap_tls: Continuing EAP-TLS (7) eap_tls: Peer indicated complete TLS record size will be 4361 bytes (7) eap_tls: Expecting 3 TLS record fragments (7) eap_tls: Got first TLS record fragment (1482 bytes). Peer indicated more fragments to follow (7) eap_tls: [eaptls verify] = first fragment (7) eap_tls: ACKing Peer's TLS record fragment (7) eap_tls: [eaptls process] = handled (7) eap: Sending EAP Request (code 1) ID 9 length 6 (7) eap: EAP session adding &reply:State = 0xf763e6b4f06aeb8c (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) Sent Access-Challenge Id 228 from 10.2.2.118:1812 to 10.2.146.43:1812 length 0 (7) EAP-Message = 0x010900060d00 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xf763e6b4f06aeb8c262be553bb4e34a0 (7) Finished request Waking up in 4.7 seconds. (8) Received Access-Request Id 229 from 10.2.146.43:1812 to 10.2.2.118:1812 length 1881 (8) Framed-MTU = 1480 (8) NAS-IP-Address = 172.19.100.107 (8) NAS-Identifier = "DHP-043SW" (8) User-Name = "host/DHP-0039D.du.msad" (8) Service-Type = Framed-User (8) Framed-Protocol = PPP (8) NAS-Port = 14 (8) NAS-Port-Type = Ethernet (8) NAS-Port-Id = "14" (8) Called-Station-Id = "20-67-7c-21-8a-80" (8) Calling-Station-Id = "10-e7-c6-05-2a-7e" (8) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (8) Tunnel-Type:0 = VLAN (8) Tunnel-Medium-Type:0 = IEEE-802 (8) Tunnel-Private-Group-Id:0 = "411" (8) State = 0xf763e6b4f06aeb8c262be553bb4e34a0 (8) EAP-Message = 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 (8) Message-Authenticator = 0x0a75c5f1ee201570860af56acc7c52bf (8) MS-RAS-Vendor = 11 (8) HP-Capability-Advert = 0x011a0000000b28 (8) HP-Capability-Advert = 0x011a0000000b2e (8) HP-Capability-Advert = 0x011a0000000b30 (8) HP-Capability-Advert = 0x011a0000000b3d (8) HP-Capability-Advert = 0x011a0000000b18 (8) HP-Capability-Advert = 0x011a0000000b19 (8) HP-Capability-Advert = 0x0138 (8) HP-Capability-Advert = 0x013a (8) HP-Capability-Advert = 0x0140 (8) HP-Capability-Advert = 0x0141 (8) HP-Capability-Advert = 0x0151 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (8) authorize { (8) if (&NAS-Port-Type == Ethernet) { (8) if (&NAS-Port-Type == Ethernet) -> TRUE (8) if (&NAS-Port-Type == Ethernet) { (8) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) { (8) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) -> FALSE (8) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) { (8) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) -> FALSE (8) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) { (8) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) -> FALSE (8) } # if (&NAS-Port-Type == Ethernet) = notfound (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "host/DHP-0039D.du.msad", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 9 length 1492 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) files: users: Matched entry DEFAULT at line 3 (8) [files] = ok rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (12), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (12) (8) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (8) ldap: --> (sAMAccountName=host/DHP-0039D.du.msad) (8) ldap: Performing search in "dc=du,dc=msad" with filter "(sAMAccountName=host/DHP-0039D.du.msad)", scope "sub" (8) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.du.msad/DC=DomainDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.du.msad/DC=ForestDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://du.msad/CN=Configuration,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (8) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (12) - Was referred to a different LDAP server (8) [ldap] = notfound (8) [expiration] = noop (8) [logintime] = noop (8) [pap] = noop (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0xf763e6b4f06aeb8c (8) eap: Finished EAP session with state 0xf763e6b4f06aeb8c (8) eap: Previous EAP request found for state 0xf763e6b4f06aeb8c, released from the list (8) eap: Peer sent packet with method EAP TLS (13) (8) eap: Calling submodule eap_tls to process data (8) eap_tls: Continuing EAP-TLS (8) eap_tls: Got additional TLS record fragment (1486 bytes). Peer indicated more fragments to follow (8) eap_tls: [eaptls verify] = more fragments (8) eap_tls: ACKing Peer's TLS record fragment (8) eap_tls: [eaptls process] = handled (8) eap: Sending EAP Request (code 1) ID 10 length 6 (8) eap: EAP session adding &reply:State = 0xf763e6b4ff69eb8c (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) Challenge { ... } # empty sub-section is ignored (8) Sent Access-Challenge Id 229 from 10.2.2.118:1812 to 10.2.146.43:1812 length 0 (8) EAP-Message = 0x010a00060d00 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0xf763e6b4ff69eb8c262be553bb4e34a0 (8) Finished request Waking up in 4.6 seconds. (9) Received Access-Request Id 230 from 10.2.146.43:1812 to 10.2.2.118:1812 length 1788 (9) Framed-MTU = 1480 (9) NAS-IP-Address = 172.19.100.107 (9) NAS-Identifier = "DHP-043SW" (9) User-Name = "host/DHP-0039D.du.msad" (9) Service-Type = Framed-User (9) Framed-Protocol = PPP (9) NAS-Port = 14 (9) NAS-Port-Type = Ethernet (9) NAS-Port-Id = "14" (9) Called-Station-Id = "20-67-7c-21-8a-80" (9) Calling-Station-Id = "10-e7-c6-05-2a-7e" (9) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (9) Tunnel-Type:0 = VLAN (9) Tunnel-Medium-Type:0 = IEEE-802 (9) Tunnel-Private-Group-Id:0 = "411" (9) State = 0xf763e6b4ff69eb8c262be553bb4e34a0 (9) EAP-Message = 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 (9) Message-Authenticator = 0xbd85021672b586837d51e59aae45a28a (9) MS-RAS-Vendor = 11 (9) HP-Capability-Advert = 0x011a0000000b28 (9) HP-Capability-Advert = 0x011a0000000b2e (9) HP-Capability-Advert = 0x011a0000000b30 (9) HP-Capability-Advert = 0x011a0000000b3d (9) HP-Capability-Advert = 0x011a0000000b18 (9) HP-Capability-Advert = 0x011a0000000b19 (9) HP-Capability-Advert = 0x0138 (9) HP-Capability-Advert = 0x013a (9) HP-Capability-Advert = 0x0140 (9) HP-Capability-Advert = 0x0141 (9) HP-Capability-Advert = 0x0151 (9) session-state: No cached attributes (9) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (9) authorize { (9) if (&NAS-Port-Type == Ethernet) { (9) if (&NAS-Port-Type == Ethernet) -> TRUE (9) if (&NAS-Port-Type == Ethernet) { (9) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) { (9) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) -> FALSE (9) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) { (9) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) -> FALSE (9) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) { (9) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) -> FALSE (9) } # if (&NAS-Port-Type == Ethernet) = notfound (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /@\./) { (9) if (&User-Name =~ /@\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "host/DHP-0039D.du.msad", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 10 length 1399 (9) eap: No EAP Start, assuming it's an on-going EAP conversation (9) [eap] = updated (9) files: users: Matched entry DEFAULT at line 3 (9) [files] = ok rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (13), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (13) (9) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (9) ldap: --> (sAMAccountName=host/DHP-0039D.du.msad) (9) ldap: Performing search in "dc=du,dc=msad" with filter "(sAMAccountName=host/DHP-0039D.du.msad)", scope "sub" (9) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.du.msad/DC=DomainDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.du.msad/DC=ForestDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://du.msad/CN=Configuration,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (9) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (13) - Was referred to a different LDAP server (9) [ldap] = notfound (9) [expiration] = noop (9) [logintime] = noop (9) [pap] = noop (9) } # authorize = updated (9) Found Auth-Type = eap (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0xf763e6b4ff69eb8c (9) eap: Finished EAP session with state 0xf763e6b4ff69eb8c (9) eap: Previous EAP request found for state 0xf763e6b4ff69eb8c, released from the list (9) eap: Peer sent packet with method EAP TLS (13) (9) eap: Calling submodule eap_tls to process data (9) eap_tls: Continuing EAP-TLS (9) eap_tls: Got final TLS record fragment (1393 bytes) (9) eap_tls: [eaptls verify] = ok (9) eap_tls: Done initial handshake (9) eap_tls: TLS_accept: SSLv3/TLS write server done (9) eap_tls: <<< recv TLS 1.2 [length 0e83] (9) eap_tls: TLS - Creating attributes from certificate OIDs (9) eap_tls: TLS-Cert-Serial := "1a00000002ac019647476d82fc000000000002" (9) eap_tls: TLS-Cert-Expiration := "280117122319Z" (9) eap_tls: TLS-Cert-Subject := "/DC=msad/DC=du/CN=****" (9) eap_tls: TLS-Cert-Issuer := "/CN=****" (9) eap_tls: TLS-Cert-Common-Name := "****" (9) eap_tls: TLS - Creating attributes from certificate OIDs (9) eap_tls: TLS-Client-Cert-Serial := "1b00006eaa6266f3c891d7fe8f000000006eaa" (9) eap_tls: TLS-Client-Cert-Expiration := "210812224512Z" (9) eap_tls: TLS-Client-Cert-Subject := "/CN=DHP-0039D.du.msad" (9) eap_tls: TLS-Client-Cert-Issuer := "/DC=msad/DC=du/CN=****" (9) eap_tls: TLS-Client-Cert-Common-Name := "DHP-0039D.du.msad" (9) eap_tls: TLS-Client-Cert-Subject-Alt-Name-Dns := "DHP-0039D.du.msad" (9) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web Server Authentication, TLS Web Client Authentication" (9) eap_tls: TLS-Client-Cert-X509v3-Subject-Key-Identifier += "5B:E3:AA:68:D2:45:CC:6F:02:39:C2:D5:7E:A0:EA:6B:9F:43:37:CF" (9) eap_tls: TLS-Client-Cert-X509v3-Authority-Key-Identifier += "keyid:BE:C5:F6:58:5D:23:25:F5:60:DC:A7:BF:98:63:E9:5E:3C:DF:FA:C5\n" (9) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage-OID += "1.3.6.1.5.5.7.3.1" (9) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage-OID += "1.3.6.1.5.5.7.3.2" (9) eap_tls: TLS_accept: SSLv3/TLS read client certificate (9) eap_tls: <<< recv TLS 1.2 [length 0046] (9) eap_tls: TLS_accept: SSLv3/TLS read client key exchange (9) eap_tls: <<< recv TLS 1.2 [length 0208] (9) eap_tls: TLS_accept: SSLv3/TLS read certificate verify (9) eap_tls: TLS_accept: SSLv3/TLS read change cipher spec (9) eap_tls: <<< recv TLS 1.2 [length 0010] (9) eap_tls: TLS_accept: SSLv3/TLS read finished (9) eap_tls: >>> send TLS 1.2 [length 0001] (9) eap_tls: TLS_accept: SSLv3/TLS write change cipher spec (9) eap_tls: >>> send TLS 1.2 [length 0010] (9) eap_tls: TLS_accept: SSLv3/TLS write finished (9) eap_tls: (other): SSL negotiation finished successfully (9) eap_tls: TLS - Connection Established (9) eap_tls: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (9) eap_tls: TLS-Session-Version = "TLS 1.2" (9) eap_tls: TLS - got 51 bytes of data (9) eap_tls: [eaptls process] = handled (9) eap: Sending EAP Request (code 1) ID 11 length 61 (9) eap: EAP session adding &reply:State = 0xf763e6b4fe68eb8c (9) [eap] = handled (9) } # authenticate = handled (9) Using Post-Auth-Type Challenge (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (9) Challenge { ... } # empty sub-section is ignored (9) session-state: Saving cached attributes (9) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (9) TLS-Session-Version = "TLS 1.2" (9) Sent Access-Challenge Id 230 from 10.2.2.118:1812 to 10.2.146.43:1812 length 0 (9) EAP-Message = 0x010b003d0d80000000331403030001011603030028314fc47cbd49e53cfe11342dcc764de5e88858a265f7e79a0a2df4a66c9ec5a180b9f4afd07edca3 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) State = 0xf763e6b4fe68eb8c262be553bb4e34a0 (9) Finished request Waking up in 4.6 seconds. (10) Received Access-Request Id 231 from 10.2.146.43:1812 to 10.2.2.118:1812 length 385 (10) Framed-MTU = 1480 (10) NAS-IP-Address = 172.19.100.107 (10) NAS-Identifier = "DHP-043SW" (10) User-Name = "host/DHP-0039D.du.msad" (10) Service-Type = Framed-User (10) Framed-Protocol = PPP (10) NAS-Port = 14 (10) NAS-Port-Type = Ethernet (10) NAS-Port-Id = "14" (10) Called-Station-Id = "20-67-7c-21-8a-80" (10) Calling-Station-Id = "10-e7-c6-05-2a-7e" (10) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (10) Tunnel-Type:0 = VLAN (10) Tunnel-Medium-Type:0 = IEEE-802 (10) Tunnel-Private-Group-Id:0 = "411" (10) State = 0xf763e6b4fe68eb8c262be553bb4e34a0 (10) EAP-Message = 0x020b00060d00 (10) Message-Authenticator = 0xe9f380f14677f8fc2fea5a7665471c71 (10) MS-RAS-Vendor = 11 (10) HP-Capability-Advert = 0x011a0000000b28 (10) HP-Capability-Advert = 0x011a0000000b2e (10) HP-Capability-Advert = 0x011a0000000b30 (10) HP-Capability-Advert = 0x011a0000000b3d (10) HP-Capability-Advert = 0x011a0000000b18 (10) HP-Capability-Advert = 0x011a0000000b19 (10) HP-Capability-Advert = 0x0138 (10) HP-Capability-Advert = 0x013a (10) HP-Capability-Advert = 0x0140 (10) HP-Capability-Advert = 0x0141 (10) HP-Capability-Advert = 0x0151 (10) Restoring &session-state (10) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (10) &session-state:TLS-Session-Version = "TLS 1.2" (10) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (10) authorize { (10) if (&NAS-Port-Type == Ethernet) { (10) if (&NAS-Port-Type == Ethernet) -> TRUE (10) if (&NAS-Port-Type == Ethernet) { (10) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) { (10) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) -> FALSE (10) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) { (10) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) -> FALSE (10) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) { (10) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) -> FALSE (10) } # if (&NAS-Port-Type == Ethernet) = notfound (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /@\./) { (10) if (&User-Name =~ /@\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) [chap] = noop (10) [mschap] = noop (10) [digest] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "host/DHP-0039D.du.msad", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) eap: Peer sent EAP Response (code 2) ID 11 length 6 (10) eap: No EAP Start, assuming it's an on-going EAP conversation (10) [eap] = updated (10) files: users: Matched entry DEFAULT at line 3 (10) [files] = ok rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (14), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://10.2.2.101:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (14) (10) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) (10) ldap: --> (sAMAccountName=host/DHP-0039D.du.msad) (10) ldap: Performing search in "dc=du,dc=msad" with filter "(sAMAccountName=host/DHP-0039D.du.msad)", scope "sub" (10) ldap: Waiting for search result... rlm_ldap (ldap): Rebinding to URL ldap://DomainDnsZones.du.msad/DC=DomainDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://ForestDnsZones.du.msad/DC=ForestDnsZones,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Rebinding to URL ldap://du.msad/CN=Configuration,DC=du,DC=msad rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Bind successful (10) ldap: Search returned no results rlm_ldap (ldap): Deleting connection (14) - Was referred to a different LDAP server (10) [ldap] = notfound (10) [expiration] = noop (10) [logintime] = noop (10) [pap] = noop (10) } # authorize = updated (10) Found Auth-Type = eap (10) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (10) authenticate { (10) eap: Expiring EAP session with state 0xf763e6b4fe68eb8c (10) eap: Finished EAP session with state 0xf763e6b4fe68eb8c (10) eap: Previous EAP request found for state 0xf763e6b4fe68eb8c, released from the list (10) eap: Peer sent packet with method EAP TLS (13) (10) eap: Calling submodule eap_tls to process data (10) eap_tls: Continuing EAP-TLS (10) eap_tls: Peer ACKed our handshake fragment. handshake is finished (10) eap_tls: [eaptls verify] = success (10) eap_tls: [eaptls process] = success (10) eap: Sending EAP Success (code 3) ID 11 length 4 (10) eap: Freeing handler (10) [eap] = ok (10) } # authenticate = ok (10) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (10) post-auth { (10) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (10) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (10) update { (10) &reply::TLS-Session-Cipher-Suite += &session-state:TLS-Session-Cipher-Suite[*] -> 'ECDHE-RSA-AES256-GCM-SHA384' (10) &reply::TLS-Session-Version += &session-state:TLS-Session-Version[*] -> 'TLS 1.2' (10) } # update = noop (10) [exec] = noop (10) policy remove_reply_message_if_eap { (10) if (&reply:EAP-Message && &reply:Reply-Message) { (10) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (10) else { (10) [noop] = noop (10) } # else = noop (10) } # policy remove_reply_message_if_eap = noop (10) } # post-auth = noop (10) Login OK: [host/DHP-0039D.du.msad] (from client *-TERREIN11-ACCESS-SWITCHES port 14 cli 10-e7-c6-05-2a-7e) (10) Sent Access-Accept Id 231 from 10.2.2.118:1812 to 10.2.146.43:1812 length 0 (10) MS-MPPE-Recv-Key = 0xef4560cc1c61e5bb4d09f9931c2e638557fd4fb00dfcf6f9d492fb4e7c4e144f (10) MS-MPPE-Send-Key = 0x67608a855c54b11683c17b6bbbf4b27033812220ce5621e7e240788d473eec22 (10) EAP-Message = 0x030b0004 (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) User-Name = "host/DHP-0039D.du.msad" (10) Finished request Waking up in 4.6 seconds. (0) Cleaning up request packet ID 221 with timestamp +68 (1) Cleaning up request packet ID 222 with timestamp +68 (2) Cleaning up request packet ID 223 with timestamp +68 (3) Cleaning up request packet ID 224 with timestamp +69 (4) Cleaning up request packet ID 225 with timestamp +69 (5) Cleaning up request packet ID 226 with timestamp +69 (6) Cleaning up request packet ID 227 with timestamp +69 (7) Cleaning up request packet ID 228 with timestamp +69 (8) Cleaning up request packet ID 229 with timestamp +69 (9) Cleaning up request packet ID 230 with timestamp +69 (10) Cleaning up request packet ID 231 with timestamp +69 Ready to process requests Kind regards, Max - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html |
|
Threaded
Open this post in threaded view
|
♦
♦
Re: VLAN assignment based on NAS ID
|
|
On 23/03/2021 10:00, Max Elzinga wrote: > I am currently testing and it seems like some networks are working, and some don’t work. For example the 10.2.16.0/24 is working, but 10.2.146.0/24 seems to be ignored. > > Example: > (10) if (&NAS-Port-Type == Ethernet) { > (10) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) { > (10) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) -> FALSE > (10) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) { > (10) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) -> FALSE > (10) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) { > (10) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) -> FALSE > (10) } # if (&NAS-Port-Type == Ethernet) = notfound > ***** > (10) Sent Access-Accept Id 231 from 10.2.2.118:1812 to 10.2.146.43:1812 length 0 > > Any idea what is going wrong? The request has a different IP address in NAS-IP-Address than the IP the request is coming from. > (0) Received Access-Request Id 221 from 10.2.146.43:1812 to 10.2.2.118:1812 length 388 > (0) Framed-MTU = 1480 > (0) NAS-IP-Address = 172.19.100.107 ^^^^ <snip> > (0) authorize { > (0) if (&NAS-Port-Type == Ethernet) { > (0) if (&NAS-Port-Type == Ethernet) -> TRUE > (0) if (&NAS-Port-Type == Ethernet) { > (0) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) { > (0) if (<ipv4prefix>&NAS-IP-Address < 10.2.146.0/24) -> FALSE > (0) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) { > (0) if (<ipv4prefix>&NAS-IP-Address < 10.2.106.0/24) -> FALSE > (0) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) { > (0) if (<ipv4prefix>&NAS-IP-Address < 10.2.16.0/24) -> FALSE > (0) } # if (&NAS-Port-Type == Ethernet) = notfound -- Matthew - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html |
|
|
On March 23, 2021 12:02:03 PM GMT+01:00, Matthew Newton <[hidden email]> wrote: > > >On 23/03/2021 10:00, Max Elzinga wrote: >> >> Any idea what is going wrong? > >The request has a different IP address in NAS-IP-Address than the IP >the >request is coming from. > > So essentially the answer to the original question is that what is going wrong is not reading debug output. 😁 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html |
«
Return to Users
|
1 view|%1 views
| Free forum by Nabble | Edit this page |