FreeRadius 3 OpenLDAP and MAC based Auth

classic Classic list List threaded Threaded
2 messages Options
| Threaded
Open this post in threaded view
|

FreeRadius 3 OpenLDAP and MAC based Auth

Jürgen Northe
First of all, I would like to say that I never copied the configuration files from FR2 to FR just like that. I have always adapted FR3 accordingly.
Now I started all from the beginning and only entered the most necessary data.  The result seems to be the same.
Here the debug output and below a closer look at the ldap section with more verbosity.

FreeRADIUS Version 3.0.13
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/date
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/redundant_ldap
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/canonicalization
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
 security {
  user = "radiusd"
  group = "radiusd"
  allow_core_dumps = no
 }
                 name = "radiusd"
                 prefix = "/usr"
                 localstatedir = "/var"
                 logdir = "/var/log/radius"
                 run_dir = "/var/run/radiusd"
}
main {
                 name = "radiusd"
                 prefix = "/usr"
                 localstatedir = "/var"
                 sbindir = "/usr/sbin"
                 logdir = "/var/log/radius"
                 run_dir = "/var/run/radiusd"
                 libdir = "/usr/lib64/freeradius"
                 radacctdir = "/var/log/radius/radacct"
                 hostname_lookups = no
                 max_request_time = 30
                 cleanup_delay = 5
                 max_requests = 16384
                 pidfile = "/var/run/radiusd/radiusd.pid"
                 checkrad = "/usr/sbin/checkrad"
                 debug_level = 0
                 proxy_requests = yes
 log {
  stripped_names = no
  auth = no
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
  max_attributes = 200
  reject_delay = 1.000000
  status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = no
  dead_time = 120
  wake_all_if_all_dead = no
 }
 home_server localhost {
  ipaddr = 127.0.0.1
  port = 1812
  type = "auth"
  secret = <<< secret >>>
  response_window = 20.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "status-server"
  ping_interval = 30
  check_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 120
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server_pool my_auth_failover {
                 type = fail-over
                 home_server = localhost
 }
 realm example.com {
                 auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
  ipaddr = 127.0.0.1
  require_message_authenticator = no
  secret = <<< secret >>>
  nas_type = "other"
  proto = "*"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client localhost_ipv6 {
  ipv6addr = ::1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client 192.168.0.7/32 {
  ipaddr = 192.168.0.7
  require_message_authenticator = no
  secret = <<< secret >>>
  shortname = "SWSG1AP1-7"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/raddb/mods-enabled/always
  always reject {
  rcode = "reject"
  simulcount = 0
  mpp = no
  }
  # Loading module "fail" from file /etc/raddb/mods-enabled/always
  always fail {
  rcode = "fail"
  simulcount = 0
  mpp = no
  }
  # Loading module "ok" from file /etc/raddb/mods-enabled/always
  always ok {
  rcode = "ok"
  simulcount = 0
  mpp = no
  }
  # Loading module "handled" from file /etc/raddb/mods-enabled/always
  always handled {
  rcode = "handled"
  simulcount = 0
  mpp = no
  }
  # Loading module "invalid" from file /etc/raddb/mods-enabled/always
  always invalid {
  rcode = "invalid"
  simulcount = 0
  mpp = no
  }
  # Loading module "userlock" from file /etc/raddb/mods-enabled/always
  always userlock {
  rcode = "userlock"
  simulcount = 0
  mpp = no
  }
  # Loading module "notfound" from file /etc/raddb/mods-enabled/always
  always notfound {
  rcode = "notfound"
  simulcount = 0
  mpp = no
  }
  # Loading module "noop" from file /etc/raddb/mods-enabled/always
  always noop {
  rcode = "noop"
  simulcount = 0
  mpp = no
  }
  # Loading module "updated" from file /etc/raddb/mods-enabled/always
  always updated {
  rcode = "updated"
  simulcount = 0
  mpp = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  filename = "/etc/raddb/mods-config/attr_filter/access_reject"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
  driver = "rlm_cache_rbtree"
  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  ttl = 15
  max_entries = 0
  epoch = 0
  add_stats = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/raddb/mods-enabled/chap
  # Loaded module rlm_date
  # Loading module "date" from file /etc/raddb/mods-enabled/date
  date {
  format = "%b %e %Y %H:%M:%S %Z"
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/raddb/mods-enabled/detail
  detail {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
  detail auth_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
  detail reply_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_dhcp
  # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/raddb/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/raddb/mods-enabled/eap
  eap {
  default_eap_type = "md5"
  timer_expire = 60
  ignore_unknown_eap_types = no
  cisco_accounting_username_bug = no
  max_sessions = 16384
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/raddb/mods-enabled/echo
  exec echo {
  wait = yes
  program = "/bin/echo %{User-Name}"
  input_pairs = "request"
  output_pairs = "reply"
  shell_escape = yes
  }
  # Loading module "exec" from file /etc/raddb/mods-enabled/exec
  exec {
  wait = no
  input_pairs = "request"
  shell_escape = yes
  timeout = 10
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/raddb/mods-enabled/expr
  expr {
  safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/raddb/mods-enabled/files
  files {
  filename = "/etc/raddb/mods-config/files/authorize"
  acctusersfile = "/etc/raddb/mods-config/files/accounting"
  preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
  linelog {
  filename = "/var/log/radius/linelog"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = "This is a log message for %{User-Name}"
  reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog
  linelog log_accounting {
  filename = "/var/log/radius/linelog-accounting"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = ""
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
  logintime {
  minimum_timeout = 60
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
  mschap {
  use_mppe = yes
  require_encryption = no
  require_strong = no
  with_ntdomain_hack = yes
   passchange {
   }
  allow_retry = yes
  winbind_retry_with_normalised_username = no
  }
  # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
  wait = yes
  program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
  shell_escape = yes
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/raddb/mods-enabled/pap
  pap {
  normalise = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
  filename = "/etc/passwd"
  format = "*User-Name:Crypt-Password:"
  delimiter = ":"
  ignore_nislike = no
  ignore_empty = yes
  allow_multiple_keys = no
  hash_size = 100
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
  preprocess {
  huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
  hints = "/etc/raddb/mods-config/preprocess/hints"
  with_ascend_hack = no
  ascend_channels_per_line = 23
  with_ntdomain_hack = no
  with_specialix_jetstream_hack = no
  with_cisco_vsa_hack = no
  with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
  radutmp {
  filename = "/var/log/radius/radutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 384
  caller_id = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
  realm IPASS {
  format = "prefix"
  delimiter = "/"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
  realm suffix {
  format = "suffix"
  delimiter = "@"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
  realm realmpercent {
  format = "suffix"
  delimiter = "%"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
  realm ntdomain {
  format = "prefix"
  delimiter = "\\"
  ignore_default = no
  ignore_null = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/raddb/mods-enabled/soh
  soh {
  dhcp = yes
  }
  # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
  filename = "/var/log/radius/sradutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 420
  caller_id = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/raddb/mods-enabled/unix
  unix {
  radwtmp = "/var/log/radius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
  # Loaded module rlm_ldap
  # Loading module "ldap1" from file /etc/raddb/mods-enabled/redundant_ldap
  ldap ldap1 {
  server = "radldap1-215"
  identity = "cn=Manager,dc=firma,dc=de"
  password = <<< secret >>>
   sasl {
   }
   user {
    scope = "sub"
    access_positive = yes
    sasl {
    }
   }
   group {
    filter = "(objectClass=posixGroup)"
    scope = "sub"
    name_attribute = "cn"
    membership_attribute = "memberOf"
    cacheable_name = no
    cacheable_dn = no
   }
   client {
    filter = "(objectClass=radiusClient)"
    scope = "sub"
    base_dn = "dc=firma,dc=de"
   }
   profile {
   }
   options {
    ldap_debug = 40
    chase_referrals = yes
    rebind = yes
    net_timeout = 1
    res_timeout = 10
    srv_timelimit = 3
    idle = 60
    probes = 3
    interval = 3
   }
   tls {
    ca_file = "/etc/raddb/certs/radldapCA.crt"
    certificate_file = "/etc/raddb/certs/radldap1-215.crt"
    private_key_file = "/etc/raddb/certs/radldap1-215.key"
    random_file = "/dev/urandom"
    start_tls = yes
    require_cert = "never"
   }
  }
Creating attribute ldap1-LDAP-Group
  # Loading module "ldap2" from file /etc/raddb/mods-enabled/redundant_ldap
  ldap ldap2 {
  server = "radldap2-216"
  identity = "cn=Manager,dc=firma,dc=de"
  password = <<< secret >>>
   sasl {
   }
   user {
    scope = "sub"
    access_positive = yes
    sasl {
    }
   }
   group {
    filter = "(objectClass=posixGroup)"
    scope = "sub"
    name_attribute = "cn"
    membership_attribute = "memberOf"
    cacheable_name = no
    cacheable_dn = no
   }
   client {
    filter = "(objectClass=radiusClient)"
    scope = "sub"
    base_dn = "dc=firma,dc=de"
   }
   profile {
   }
   options {
    ldap_debug = 40
    chase_referrals = yes
    rebind = yes
    net_timeout = 1
    res_timeout = 10
    srv_timelimit = 3
    idle = 60
    probes = 3
    interval = 3
   }
   tls {
    ca_file = "/etc/raddb/certs/radldapCA.crt"
    certificate_file = "/etc/raddb/certs/radldap2-216.crt"
    private_key_file = "/etc/raddb/certs/radldap2-216.key"
    random_file = "/dev/urandom"
    start_tls = yes
    require_cert = "never"
   }
  }
Creating attribute ldap2-LDAP-Group
  instantiate {
  # Instantiating module "ldap1" from file /etc/raddb/mods-enabled/redundant_ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20444
   accounting {
    reference = "%{tolower:type.%{Acct-Status-Type}}"
   }
   post-auth {
    reference = "."
   }
rlm_ldap (ldap1): Initialising connection pool
   pool {
    start = 5
    min = 3
    max = 32
    spare = 10
    uses = 0
    lifetime = 0
    cleanup_interval = 30
    idle_timeout = 60
    retry_delay = 30
    spread = no
   }
rlm_ldap (ldap1): Opening additional connection (0), 1 of 32 pending slots used
rlm_ldap (ldap1): Connecting to ldap://radldap1-215:389
TLSMC: MozNSS compatibility interception begins.
tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present.
tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only.
TLSMC: MozNSS compatibility interception ends.
rlm_ldap (ldap1): Waiting for bind result...
rlm_ldap (ldap1): Bind successful
rlm_ldap (ldap1): Opening additional connection (1), 1 of 31 pending slots used
rlm_ldap (ldap1): Connecting to ldap://radldap1-215:389
TLSMC: MozNSS compatibility interception begins.
tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present.
tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only.
TLSMC: MozNSS compatibility interception ends.
rlm_ldap (ldap1): Waiting for bind result...
rlm_ldap (ldap1): Bind successful
rlm_ldap (ldap1): Opening additional connection (2), 1 of 30 pending slots used
rlm_ldap (ldap1): Connecting to ldap://radldap1-215:389
TLSMC: MozNSS compatibility interception begins.
tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present.
tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only.
TLSMC: MozNSS compatibility interception ends.
rlm_ldap (ldap1): Waiting for bind result...
rlm_ldap (ldap1): Bind successful
rlm_ldap (ldap1): Opening additional connection (3), 1 of 29 pending slots used
rlm_ldap (ldap1): Connecting to ldap://radldap1-215:389
TLSMC: MozNSS compatibility interception begins.
tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present.
tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only.
TLSMC: MozNSS compatibility interception ends.
rlm_ldap (ldap1): Waiting for bind result...
rlm_ldap (ldap1): Bind successful
rlm_ldap (ldap1): Opening additional connection (4), 1 of 28 pending slots used
rlm_ldap (ldap1): Connecting to ldap://radldap1-215:389
TLSMC: MozNSS compatibility interception begins.
tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present.
tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only.
TLSMC: MozNSS compatibility interception ends.
rlm_ldap (ldap1): Waiting for bind result...
rlm_ldap (ldap1): Bind successful
  # Instantiating module "ldap2" from file /etc/raddb/mods-enabled/redundant_ldap
   accounting {
    reference = "%{tolower:type.%{Acct-Status-Type}}"
   }
   post-auth {
    reference = "."
   }
rlm_ldap (ldap2): Initialising connection pool
   pool {
    start = 5
    min = 3
    max = 32
    spare = 10
    uses = 0
    lifetime = 0
    cleanup_interval = 30
    idle_timeout = 60
    retry_delay = 30
    spread = no
   }
rlm_ldap (ldap2): Opening additional connection (0), 1 of 32 pending slots used
rlm_ldap (ldap2): Connecting to ldap://radldap2-216:389
TLSMC: MozNSS compatibility interception begins.
tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present.
tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only.
TLSMC: MozNSS compatibility interception ends.
rlm_ldap (ldap2): Waiting for bind result...
rlm_ldap (ldap2): Bind successful
rlm_ldap (ldap2): Opening additional connection (1), 1 of 31 pending slots used
rlm_ldap (ldap2): Connecting to ldap://radldap2-216:389
TLSMC: MozNSS compatibility interception begins.
tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present.
tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only.
TLSMC: MozNSS compatibility interception ends.
rlm_ldap (ldap2): Waiting for bind result...
rlm_ldap (ldap2): Bind successful
rlm_ldap (ldap2): Opening additional connection (2), 1 of 30 pending slots used
rlm_ldap (ldap2): Connecting to ldap://radldap2-216:389
TLSMC: MozNSS compatibility interception begins.
tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present.
tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only.
TLSMC: MozNSS compatibility interception ends.
rlm_ldap (ldap2): Waiting for bind result...
rlm_ldap (ldap2): Bind successful
rlm_ldap (ldap2): Opening additional connection (3), 1 of 29 pending slots used
rlm_ldap (ldap2): Connecting to ldap://radldap2-216:389
TLSMC: MozNSS compatibility interception begins.
tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present.
tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only.
TLSMC: MozNSS compatibility interception ends.
rlm_ldap (ldap2): Waiting for bind result...
rlm_ldap (ldap2): Bind successful
rlm_ldap (ldap2): Opening additional connection (4), 1 of 28 pending slots used
rlm_ldap (ldap2): Connecting to ldap://radldap2-216:389
TLSMC: MozNSS compatibility interception begins.
tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present.
tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only.
TLSMC: MozNSS compatibility interception ends.
rlm_ldap (ldap2): Waiting for bind result...
rlm_ldap (ldap2): Bind successful
  }
  # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
  # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
  # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
    tls = "tls-common"
   }
   tls-config tls-common {
    verify_depth = 0
    ca_path = "/etc/raddb/certs"
    pem_file_type = yes
    private_key_file = "/etc/raddb/certs/radldap1-215.key"
    certificate_file = "/etc/raddb/certs/radldap1-215.crt"
    ca_file = "/etc/raddb/certs/radldapCA.crt"
    dh_file = "/etc/raddb/certs/dh"
    fragment_size = 1024
    include_length = yes
    auto_chain = yes
    check_crl = no
    check_all_crl = no
    cipher_list = "DEFAULT"
    cipher_server_preference = no
    ecdh_curve = "prime256v1"
    cache {
    enable = no
    lifetime = 24
    max_entries = 255
    }
    verify {
    skip_if_ocsp_ok = no
    }
    ocsp {
    enable = no
    override_cert_url = yes
    url = "http://127.0.0.1/ocsp/"
    use_nonce = yes
    timeout = 0
    softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
    tls = "tls-common"
    default_eap_type = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
  # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration
  # Instantiating module "files" from file /etc/raddb/mods-enabled/files
reading pairlist file /etc/raddb/mods-config/files/authorize
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog
  # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
  # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
  # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
  # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:331
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
  type = "auth"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipaddr = 127.0.0.1
  port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 51461
Listening on proxy address :: port 54714
Ready to process requests
(0) Received Access-Request Id 165 from 192.168.0.7:3437 to 192.168.0.215:1812 length 241
(0)   User-Name = "106530670342"
(0)   User-Password = "106530670342"
(0)   NAS-IP-Address = 192.168.0.7
(0)   NAS-Identifier = "SWSG1AP1-7-v161121"
(0)   NAS-Port = 16879715
(0)   NAS-Port-Id = "slot=1;subslot=0;port=25;vlanid=99"
(0)   NAS-Port-Type = Ethernet
(0)   Service-Type = Call-Check
(0)   Framed-Protocol = PPP
(0)   Calling-Station-Id = "10-65-30-67-03-42"
(0)   Acct-Session-Id = "1010118123613c010"
(0)   Huawei-Connect-ID = 1290241
(0)   Huawei-Product-ID = "H3C S5120-52C-EI"
(0)   Huawei-Startup-Stamp = 956750420
(0)   Attr-26.43.230 = 0x4769676162697445746865726e6574312f302f3235
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "106530670342", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0)     [eap] = noop
(0) files: users: Matched entry DEFAULT at line 195
(0)     [files] = ok
(0)     redundant redundant_ldap {
rlm_ldap (ldap1): Reserved connection (0)
(0) ldap1: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
(0) ldap1:    --> (cn=106530670342)
(0) ldap1: Performing search in "dc=firma,dc=de" with filter "(cn=106530670342)", scope "sub"
(0) ldap1: Waiting for search result...
(0) ldap1: User object found at DN "cn=NBBZ1807-134,cn=4.notebooks,cn=172.17.0.0,cn=SUBNET,cn=DHCP Config,dc=firma,dc=de"
(0) ldap1: Processing user attributes
(0) ldap1: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute
(0) ldap1: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure)
rlm_ldap (ldap1): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_ldap (ldap1): Opening additional connection (5), 1 of 27 pending slots used
rlm_ldap (ldap1): Connecting to ldap://radldap1-215:389
TLSMC: MozNSS compatibility interception begins.
tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present.
tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only.
TLSMC: MozNSS compatibility interception ends.
rlm_ldap (ldap1): Waiting for bind result...
rlm_ldap (ldap1): Bind successful
(0)       [ldap1] = ok
(0)     } # redundant redundant_ldap = ok
(0)     [expiration] = noop
(0)     [logintime] = noop
(0) pap: WARNING: No "known good" password found for the user.  Not setting Auth-Type
(0) pap: WARNING: Authentication will fail unless a "known good" password is available
(0)     [pap] = noop
(0)   } # authorize = ok
(0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject
(0) Failed to authenticate the user
(0) Using Post-Auth-Type Reject
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)   Post-Auth-Type REJECT {
(0) attr_filter.access_reject: EXPAND %{User-Name}
(0) attr_filter.access_reject:    --> 106530670342
(0) attr_filter.access_reject: Matched entry DEFAULT at line 11
(0)     [attr_filter.access_reject] = updated
(0)     [eap] = noop
(0)     policy remove_reply_message_if_eap {
(0)       if (&reply:EAP-Message && &reply:Reply-Message) {
(0)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(0)       else {
(0)         [noop] = noop
(0)       } # else = noop
(0)     } # policy remove_reply_message_if_eap = noop
(0)   } # Post-Auth-Type REJECT = updated
(0) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(0) Sending delayed response
(0) Sent Access-Reject Id 165 from 192.168.0.215:1812 to 192.168.0.7:3437 length 20

closer look...

Wed Jan  9 12:32:33 2019 : Debug: (0) ldap1: Performing search in "dc=firma,dc=de" with filter "(cn=106530670342)", scope "sub"
Wed Jan  9 12:32:33 2019 : Debug: (0) ldap1: Waiting for search result...
Wed Jan  9 12:32:33 2019 : Debug: (0) ldap1: User object found at DN "cn=NBBZ1807-134,cn=4.notebooks,cn=172.17.0.0,cn=SUBNET,cn=DHCP Config,dc=firma,dc=de"
Wed Jan  9 12:32:33 2019 : Debug: (0) ldap1: Processing user attributes
Wed Jan  9 12:32:33 2019 : Debug: (0) ldap1: Attribute "userPassword" not found in LDAP object
Wed Jan  9 12:32:33 2019 : Debug: (0) ldap1: Attribute "radiusControlAttribute" not found in LDAP object
Wed Jan  9 12:32:33 2019 : Debug: (0) ldap1: Attribute "radiusRequestAttribute" not found in LDAP object
Wed Jan  9 12:32:33 2019 : Debug: (0) ldap1: Attribute "radiusReplyAttribute" not found in LDAP object
Wed Jan  9 12:32:33 2019 : WARNING: (0) ldap1: No "known good" password added. Ensure the admin user has permission to read the password attribute
Wed Jan  9 12:32:33 2019 : WARNING: (0) ldap1: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure)
Wed Jan  9 12:32:33 2019 : Debug: rlm_ldap (ldap1): Released connection (5)
Wed Jan  9 12:32:33 2019 : Info: Need 2 more connections to reach min connections (3)
Wed Jan  9 12:32:33 2019 : Info: rlm_ldap (ldap1): Opening additional connection (6), 1 of 31 pending slots used
Wed Jan  9 12:32:33 2019 : Debug: rlm_ldap (ldap1): Connecting to ldap://radldap1-215:389
Wed Jan  9 12:32:33 2019 : Debug: rlm_ldap (ldap1): New libldap handle 0x5606165d3d70
TLSMC: MozNSS compatibility interception begins.
tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present.
tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only.
TLSMC: MozNSS compatibility interception ends.
Wed Jan  9 12:32:33 2019 : Debug: rlm_ldap (ldap1): Waiting for bind result...
Wed Jan  9 12:32:33 2019 : Debug: rlm_ldap (ldap1): Bind successful
Wed Jan  9 12:32:33 2019 : Debug: (0)       modsingle[authorize]: returned from ldap1 (rlm_ldap)
Wed Jan  9 12:32:33 2019 : Debug: (0)       [ldap1] = ok
Wed Jan  9 12:32:33 2019 : Debug: (0)     } # redundant redundant_ldap = ok
Wed Jan  9 12:32:33 2019 : Debug: (0)     modsingle[authorize]: calling expiration (rlm_expiration)
Wed Jan  9 12:32:33 2019 : Debug: (0)     modsingle[authorize]: returned from expiration (rlm_expiration)
Wed Jan  9 12:32:33 2019 : Debug: (0)     [expiration] = noop
Wed Jan  9 12:32:33 2019 : Debug: (0)     modsingle[authorize]: calling logintime (rlm_logintime)
Wed Jan  9 12:32:33 2019 : Debug: (0)     modsingle[authorize]: returned from logintime (rlm_logintime)
Wed Jan  9 12:32:33 2019 : Debug: (0)     [logintime] = noop
Wed Jan  9 12:32:33 2019 : Debug: (0)     modsingle[authorize]: calling pap (rlm_pap)
Wed Jan  9 12:32:33 2019 : WARNING: (0) pap: No "known good" password found for the user.  Not setting Auth-Type
Wed Jan  9 12:32:33 2019 : WARNING: (0) pap: Authentication will fail unless a "known good" password is available
Wed Jan  9 12:32:33 2019 : Debug: (0)     modsingle[authorize]: returned from pap (rlm_pap)
Wed Jan  9 12:32:33 2019 : Debug: (0)     [pap] = noop
Wed Jan  9 12:32:33 2019 : Debug: (0)   } # authorize = ok
Wed Jan  9 12:32:33 2019 : ERROR: (0) No Auth-Type found: rejecting the user via Post-Auth-Type = Reject
Wed Jan  9 12:32:33 2019 : Debug: (0) Failed to authenticate the user
Wed Jan  9 12:32:33 2019 : Debug: (0) Using Post-Auth-Type Reject

The attributes which where not found are not stored in the directory object (laptop), thats true when I query with ldapsearch.
Wed Jan  9 12:32:33 2019 : Debug: (0) # Executing group from file /etc/raddb/sites-enabled/default
Wed Jan  9 12:32:33 2019 : Debug: (0)   Post-Auth-Type REJECT {
Wed Jan  9 12:32:33 2019 : Debug: (0)     modsingle[post-auth]: calling attr_filter.access_reject (rlm_attr_filter)
Wed Jan  9 12:32:33 2019 : Debug: %{User-Name}
Wed Jan  9 12:32:33 2019 : Debug: Parsed xlat tree:

Waking up in 3.9 seconds.
(0) Cleaning up request packet ID 165 with timestamp +30
Ready to process requests


-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
| Threaded
Open this post in threaded view
|

Re: FreeRadius 3 OpenLDAP and MAC based Auth

James
Hi Jürgen,



On Wed, 9 Jan 2019 at 11:42, Jürgen Northe <[hidden email]> wrote:

> Here the debug output and below a closer look at the ldap section with
> more verbosity.
>

You send an Access-Request with  User-Name and User-Password

(0) Received Access-Request Id 165 from 192.168.0.7:3437 to
> 192.168.0.215:1812 length 241
> (0)   User-Name = "106530670342"
> (0)   User-Password = "106530670342"
>

You check the user but there's no password

(0)     redundant redundant_ldap {

> rlm_ldap (ldap1): Reserved connection (0)
> (0) ldap1: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
> (0) ldap1:    --> (cn=106530670342)
> (0) ldap1: Performing search in "dc=firma,dc=de" with filter
> "(cn=106530670342)", scope "sub"
> (0) ldap1: Waiting for search result...
> (0) ldap1: User object found at DN
> "cn=NBBZ1807-134,cn=4.notebooks,cn=172.17.0.0,cn=SUBNET,cn=DHCP
> Config,dc=firma,dc=de"
> (0) ldap1: Processing user attributes
> (0) ldap1: WARNING: No "known good" password added. Ensure the admin user
> has permission to read the password attribute
> (0) ldap1: WARNING: PAP authentication will *NOT* work with Active
> Directory (if that is what you were trying to configure)
>

So Access-Reject is sent

>
> (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type =
> Reject
> (0) Failed to authenticate the user
> (0) Using Post-Auth-Type Reject
>
> (0) Sent Access-Reject Id 165 from 192.168.0.215:1812 to 192.168.0.7:3437
> length 20
>
> closer look...
>
> Wed Jan  9 12:32:33 2019 : Debug: (0) ldap1: Performing search in
> "dc=firma,dc=de" with filter "(cn=106530670342)", scope "sub"
> Wed Jan  9 12:32:33 2019 : Debug: (0) ldap1: Waiting for search result...
> Wed Jan  9 12:32:33 2019 : Debug: (0) ldap1: User object found at DN
> "cn=NBBZ1807-134,cn=4.notebooks,cn=172.17.0.0,cn=SUBNET,cn=DHCP
> Config,dc=firma,dc=de"
> Wed Jan  9 12:32:33 2019 : Debug: (0) ldap1: Processing user attributes
> Wed Jan  9 12:32:33 2019 : Debug: (0) ldap1: Attribute "userPassword" not
> found in LDAP object
> Wed Jan  9 12:32:33 2019 : Debug: (0) ldap1: Attribute
> "radiusControlAttribute" not found in LDAP object
> Wed Jan  9 12:32:33 2019 : Debug: (0) ldap1: Attribute
> "radiusRequestAttribute" not found in LDAP object
> Wed Jan  9 12:32:33 2019 : Debug: (0) ldap1: Attribute
> "radiusReplyAttribute" not found in LDAP object
>

Maybe you need to populate userPassword ?

The attributes which where not found are not stored in the directory object
> (laptop), thats true when I query with ldapsearch.
> Wed Jan  9 12:32:33 2019 : Debug: (0) # Executing group from file
> /etc/raddb/sites-enabled/default
> Wed Jan  9 12:32:33 2019 : Debug: (0)   Post-Auth-Type REJECT {
> Wed Jan  9 12:32:33 2019 : Debug: (0)     modsingle[post-auth]: calling
> attr_filter.access_reject (rlm_attr_filter)
> Wed Jan  9 12:32:33 2019 : Debug: %{User-Name}
> Wed Jan  9 12:32:33 2019 : Debug: Parsed xlat tree:
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html