EAP md5

classic Classic list List threaded Threaded
1 message Options
| Threaded
Open this post in threaded view
|

EAP md5

Juan Daniel Moreno
Hi everyone,

I'm having a problem with freeradius 1.0.4 configuration. I configured it to work with PAP, CHAP, MS-CHAPv1, and MS-CHAPv2. Now I would like to work with EAP-MD5 but I have always the same response:

rad_recv: Access-Request packet from host 192.168.2.63:1108, id=65, length=88
Waking up in 31 seconds...
Thread 1 got semaphore
Thread 1 handling request 5, (2 handled so far)
        User-Name = "juan"
        EAP-Message = 0x025700180410b8c3ecb73fe2a82ab50152301561f65f0008
        State = 0x36f19352ad8e53da9ad68e321a2a1a81
        Message-Authenticator = 0x676a955991b9dcdee684a339aa8420c2
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 5
  modcall[authorize]: module "preprocess" returns ok for request 5
  modcall[authorize]: module "chap" returns noop for request 5
  modcall[authorize]: module "mschap" returns noop for request 5
    rlm_realm: No '@' in User-Name = "juan", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 5
  rlm_eap: EAP packet type response id 87 length 24
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 5
    users: Matched entry juan at line 93
  modcall[authorize]: module "files" returns ok for request 5
modcall: group authorize returns updated for request 5
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 5
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/md5
  rlm_eap: processing type md5
  rlm_eap: Freeing handler
  modcall[authenticate]: module "eap" returns reject for request 5
modcall: group authenticate returns reject for request 5
auth: Failed to validate the user.
Delaying request 5 for 1 seconds
Finished request 5
Going to the next request
Thread 1 waiting to be assigned a request
--- Walking the entire request list ---
Sending Access-Reject of id 65 to 192.168.2.63:1108
        EAP-Message = 0x04570004
        Message-Authenticator = 0x00000000000000000000000000000000
        Reply-Message = "Hello, %u"


I really don't know what to do. I'm almost sure it's the radiusd.conf or eap.con files. Can anybody help me?? Thank you!!

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html