EAP-PWD Authentication with Username and MAC

classic Classic list List threaded Threaded
6 messages Options
| Threaded
Open this post in threaded view
|

EAP-PWD Authentication with Username and MAC

psuet
Hi,

I want to authenticate users with EAP-PWD with
./mods-config/files/authorize and check the used Calling-Station-ID in
the process.

A example for an entry in the authorize file:
> username Calling-Station-Id == "A1-B2-C3-D4-E5-F6" Cleartext-Password
> := "password"

Authentication works fine for PEAP, but it looks like Calling-Station-ID
is not available when the file is checked against when using EAP-PWD. Is
there a method to make Calling-Station-Id available to the files mod
when using EAP-PWD?

(Freeradius 3.0.21)

Thanks for any answer!

Paul
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
| Threaded
Open this post in threaded view
|

Re: EAP-PWD Authentication with Username and MAC

Jorge Pereira-2
Please share the output https://wiki.freeradius.org/guide/radiusd-X <https://wiki.freeradius.org/guide/radiusd-X>

---
Jorge Pereira
[hidden email]




> On 26 Jul 2020, at 19:49, psuet <[hidden email]> wrote:
>
> Hi,
>
> I want to authenticate users with EAP-PWD with ./mods-config/files/authorize and check the used Calling-Station-ID in the process.
>
> A example for an entry in the authorize file:
>> username Calling-Station-Id == "A1-B2-C3-D4-E5-F6" Cleartext-Password := "password"
>
> Authentication works fine for PEAP, but it looks like Calling-Station-ID is not available when the file is checked against when using EAP-PWD. Is there a method to make Calling-Station-Id available to the files mod when using EAP-PWD?
>
> (Freeradius 3.0.21)
>
> Thanks for any answer!
>
> Paul
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
| Threaded
Open this post in threaded view
|

Re: EAP-PWD Authentication with Username and MAC

psuet
Hi,

here is my log for a EAP-PWD Authentication and the following content in
my authorize file:

"fEAy7zL2B9" Calling-Station-Id == "D8-C7-71-88-93-83",
Cleartext-Password := "password"
         Tunnel-Type = 13,
         Tunnel-Medium-Type = 6,
         Tunnel-Private-Group-Id = 3706

Thanks for any answer!

Paul

(Domain and secrets have been replaced)

FreeRADIUS Version 3.0.21
Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/mschap
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/utf8
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/preprocess
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/cache_eap
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/mods-enabled/date
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/digest
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/pap
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/replicate
including configuration file
/etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/linelog
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/eap
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/control
including configuration file /etc/freeradius/policy.d/rfc7542
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/debug
including configuration file /etc/freeradius/policy.d/operator-name
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/accounting
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/abfab-tr
including configuration file
/etc/freeradius/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/eap
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
main {
  security {
  user = "freerad"
  group = "freerad"
  allow_core_dumps = no
  }
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
}
main {
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        sbindir = "/usr/sbin"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
        libdir = "/usr/lib/freeradius"
        radacctdir = "/var/log/freeradius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 16384
        pidfile = "/var/run/freeradius/freeradius.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
  log {
  stripped_names = no
  auth = no
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
  }
  resources {
  }
  security {
  max_attributes = 200
  reject_delay = 1.000000
  status_server = yes
  }
}
radiusd: #### Loading Realms and Home Servers ####
  proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = no
  dead_time = 120
  wake_all_if_all_dead = no
  }
  home_server localhost {
  ipaddr = 127.0.0.1
  port = 1812
  type = "auth"
  secret = <<< secret >>>
  response_window = 20.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "status-server"
  ping_interval = 30
  check_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 120
   limit {
    max_connections = 16
    max_requests = 0
    lifetime = 0
    idle_timeout = 0
   }
   coa {
    irt = 2
    mrt = 16
    mrc = 5
    mrd = 30
   }
  }
  home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
  }
  realm example.com {
        auth_pool = my_auth_failover
  }
  realm LOCAL {
  }
  realm test.domain.de {
  }
  realm sub1.domain.de {
  }
  realm sub3.domain.de {
  }
  realm domain.de {
  }
radiusd: #### Loading Clients ####
  client localhost {
  ipaddr = 127.0.0.1
  require_message_authenticator = no
  secret = <<< secret >>>
  nas_type = "other"
  proto = "*"
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
  }
  client localhost_ipv6 {
  ipv6addr = ::1
  require_message_authenticator = no
  secret = <<< secret >>>
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
  }
  client domain.mgmt.x.ac {
  ipaddr = 10.10.1.53
  require_message_authenticator = no
  secret = <<< secret >>>
  shortname = "domain.mgmt.x.ac"
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
  }
Debugger not attached
systemd watchdog is disabled
  # Creating Auth-Type = mschap
  # Creating Auth-Type = eap
  # Creating Auth-Type = PAP
  # Creating Auth-Type = CHAP
  # Creating Auth-Type = MS-CHAP
  # Creating Auth-Type = digest
radiusd: #### Instantiating modules ####
  modules {
   # Loaded module rlm_mschap
   # Loading module "mschap" from file
/etc/freeradius/mods-enabled/mschap
   mschap {
    use_mppe = yes
    require_encryption = no
    require_strong = no
    with_ntdomain_hack = yes
    passchange {
    }
    allow_retry = yes
    winbind_retry_with_normalised_username = no
   }
   # Loaded module rlm_detail
   # Loading module "detail" from file
/etc/freeradius/mods-enabled/detail
   detail {
    filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
    header = "%t"
    permissions = 384
    locking = no
    escape_filenames = no
    log_packet_header = no
   }
   # Loaded module rlm_soh
   # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
   soh {
    dhcp = yes
   }
   # Loaded module rlm_utf8
   # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
   # Loaded module rlm_chap
   # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
   # Loaded module rlm_files
   # Loading module "files" from file /etc/freeradius/mods-enabled/files
   files {
    filename = "/etc/freeradius/mods-config/files/authorize"
    acctusersfile = "/etc/freeradius/mods-config/files/accounting"
    preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
    key = "%{%{Stripped-User-Name}:-%{User-Name}}"
   }
   # Loaded module rlm_unpack
   # Loading module "unpack" from file
/etc/freeradius/mods-enabled/unpack
   # Loaded module rlm_radutmp
   # Loading module "sradutmp" from file
/etc/freeradius/mods-enabled/sradutmp
   radutmp sradutmp {
    filename = "/var/log/freeradius/sradutmp"
    username = "%{User-Name}"
    case_sensitive = yes
    check_with_nas = yes
    permissions = 420
    caller_id = no
   }
   # Loaded module rlm_preprocess
   # Loading module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
   preprocess {
    huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
    hints = "/etc/freeradius/mods-config/preprocess/hints"
    with_ascend_hack = no
    ascend_channels_per_line = 23
    with_ntdomain_hack = no
    with_specialix_jetstream_hack = no
    with_cisco_vsa_hack = no
    with_alvarion_vsa_hack = no
   }
   # Loaded module rlm_passwd
   # Loading module "etc_passwd" from file
/etc/freeradius/mods-enabled/passwd
   passwd etc_passwd {
    filename = "/etc/passwd"
    format = "*User-Name:Crypt-Password:"
    delimiter = ":"
    ignore_nislike = no
    ignore_empty = yes
    allow_multiple_keys = no
    hash_size = 100
   }
   # Loaded module rlm_attr_filter
   # Loading module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
   attr_filter attr_filter.post-proxy {
    filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
    key = "%{Realm}"
    relaxed = no
   }
   # Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
   attr_filter attr_filter.pre-proxy {
    filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
    key = "%{Realm}"
    relaxed = no
   }
   # Loading module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
   attr_filter attr_filter.access_reject {
    filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
    key = "%{User-Name}"
    relaxed = no
   }
   # Loading module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
   attr_filter attr_filter.access_challenge {
    filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
    key = "%{User-Name}"
    relaxed = no
   }
   # Loading module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
   attr_filter attr_filter.accounting_response {
    filename =
"/etc/freeradius/mods-config/attr_filter/accounting_response"
    key = "%{User-Name}"
    relaxed = no
   }
   # Loaded module rlm_cache
   # Loading module "cache_eap" from file
/etc/freeradius/mods-enabled/cache_eap
   cache cache_eap {
    driver = "rlm_cache_rbtree"
    key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
    ttl = 15
    max_entries = 0
    epoch = 0
    add_stats = no
   }
   # Loaded module rlm_exec
   # Loading module "ntlm_auth" from file
/etc/freeradius/mods-enabled/ntlm_auth
   exec ntlm_auth {
    wait = yes
    program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
    shell_escape = yes
   }
   # Loaded module rlm_date
   # Loading module "date" from file /etc/freeradius/mods-enabled/date
   date {
    format = "%b %e %Y %H:%M:%S %Z"
    utc = no
   }
   # Loading module "wispr2date" from file
/etc/freeradius/mods-enabled/date
   date wispr2date {
    format = "%Y-%m-%dT%H:%M:%S"
    utc = no
   }
   # Loaded module rlm_expr
   # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
   expr {
    safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
   }
   # Loaded module rlm_unix
   # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
   unix {
    radwtmp = "/var/log/freeradius/radwtmp"
   }
Creating attribute Unix-Group
   # Loaded module rlm_digest
   # Loading module "digest" from file
/etc/freeradius/mods-enabled/digest
   # Loading module "auth_log" from file
/etc/freeradius/mods-enabled/detail.log
   detail auth_log {
    filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
    header = "%t"
    permissions = 384
    locking = no
    escape_filenames = no
    log_packet_header = no
   }
   # Loading module "reply_log" from file
/etc/freeradius/mods-enabled/detail.log
   detail reply_log {
    filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
    header = "%t"
    permissions = 384
    locking = no
    escape_filenames = no
    log_packet_header = no
   }
   # Loading module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
   detail pre_proxy_log {
    filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
    header = "%t"
    permissions = 384
    locking = no
    escape_filenames = no
    log_packet_header = no
   }
   # Loading module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
   detail post_proxy_log {
    filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
    header = "%t"
    permissions = 384
    locking = no
    escape_filenames = no
    log_packet_header = no
   }
   # Loading module "radutmp" from file
/etc/freeradius/mods-enabled/radutmp
   radutmp {
    filename = "/var/log/freeradius/radutmp"
    username = "%{User-Name}"
    case_sensitive = yes
    check_with_nas = yes
    permissions = 384
    caller_id = yes
   }
   # Loaded module rlm_realm
   # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
   realm IPASS {
    format = "prefix"
    delimiter = "/"
    ignore_default = no
    ignore_null = no
   }
   # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
   realm suffix {
    format = "suffix"
    delimiter = "@"
    ignore_default = no
    ignore_null = no
   }
   # Loading module "bangpath" from file
/etc/freeradius/mods-enabled/realm
   realm bangpath {
    format = "prefix"
    delimiter = "!"
    ignore_default = no
    ignore_null = no
   }
   # Loading module "realmpercent" from file
/etc/freeradius/mods-enabled/realm
   realm realmpercent {
    format = "suffix"
    delimiter = "%"
    ignore_default = no
    ignore_null = no
   }
   # Loading module "ntdomain" from file
/etc/freeradius/mods-enabled/realm
   realm ntdomain {
    format = "prefix"
    delimiter = "\\"
    ignore_default = no
    ignore_null = no
   }
   # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
   exec {
    wait = no
    input_pairs = "request"
    shell_escape = yes
    timeout = 10
   }
   # Loaded module rlm_pap
   # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
   pap {
    normalise = yes
   }
   # Loaded module rlm_always
   # Loading module "reject" from file
/etc/freeradius/mods-enabled/always
   always reject {
    rcode = "reject"
    simulcount = 0
    mpp = no
   }
   # Loading module "fail" from file /etc/freeradius/mods-enabled/always
   always fail {
    rcode = "fail"
    simulcount = 0
    mpp = no
   }
   # Loading module "ok" from file /etc/freeradius/mods-enabled/always
   always ok {
    rcode = "ok"
    simulcount = 0
    mpp = no
   }
   # Loading module "handled" from file
/etc/freeradius/mods-enabled/always
   always handled {
    rcode = "handled"
    simulcount = 0
    mpp = no
   }
   # Loading module "invalid" from file
/etc/freeradius/mods-enabled/always
   always invalid {
    rcode = "invalid"
    simulcount = 0
    mpp = no
   }
   # Loading module "userlock" from file
/etc/freeradius/mods-enabled/always
   always userlock {
    rcode = "userlock"
    simulcount = 0
    mpp = no
   }
   # Loading module "notfound" from file
/etc/freeradius/mods-enabled/always
   always notfound {
    rcode = "notfound"
    simulcount = 0
    mpp = no
   }
   # Loading module "noop" from file /etc/freeradius/mods-enabled/always
   always noop {
    rcode = "noop"
    simulcount = 0
    mpp = no
   }
   # Loading module "updated" from file
/etc/freeradius/mods-enabled/always
   always updated {
    rcode = "updated"
    simulcount = 0
    mpp = no
   }
   # Loaded module rlm_replicate
   # Loading module "replicate" from file
/etc/freeradius/mods-enabled/replicate
   # Loaded module rlm_dynamic_clients
   # Loading module "dynamic_clients" from file
/etc/freeradius/mods-enabled/dynamic_clients
   # Loaded module rlm_logintime
   # Loading module "logintime" from file
/etc/freeradius/mods-enabled/logintime
   logintime {
    minimum_timeout = 60
   }
   # Loaded module rlm_expiration
   # Loading module "expiration" from file
/etc/freeradius/mods-enabled/expiration
   # Loaded module rlm_linelog
   # Loading module "linelog" from file
/etc/freeradius/mods-enabled/linelog
   linelog {
    filename = "/var/log/freeradius/linelog"
    escape_filenames = no
    syslog_severity = "info"
    permissions = 384
    format = "This is a log message for %{User-Name}"
    reference = "messages.%{%{reply:Packet-Type}:-default}"
   }
   # Loading module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
   linelog log_accounting {
    filename = "/var/log/freeradius/linelog-accounting"
    escape_filenames = no
    syslog_severity = "info"
    permissions = 384
    format = ""
    reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
   }
   # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
   exec echo {
    wait = yes
    program = "/bin/echo %{User-Name}"
    input_pairs = "request"
    output_pairs = "reply"
    shell_escape = yes
   }
   # Loaded module rlm_eap
   # Loading module "eap" from file /etc/freeradius/mods-enabled/eap
   eap {
    default_eap_type = "pwd"
    timer_expire = 60
    ignore_unknown_eap_types = no
    cisco_accounting_username_bug = no
    max_sessions = 16384
   }
   instantiate {
   }
   # Instantiating module "mschap" from file
/etc/freeradius/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
   # Instantiating module "detail" from file
/etc/freeradius/mods-enabled/detail
   # Instantiating module "files" from file
/etc/freeradius/mods-enabled/files
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
   # Instantiating module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
   # Instantiating module "etc_passwd" from file
/etc/freeradius/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
   # Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
   # Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
   # Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/mods-config/attr_filter/access_reject
   # Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/mods-config/attr_filter/access_challenge
   # Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/mods-config/attr_filter/accounting_response
   # Instantiating module "cache_eap" from file
/etc/freeradius/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
   # Instantiating module "auth_log" from file
/etc/freeradius/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
   # Instantiating module "reply_log" from file
/etc/freeradius/mods-enabled/detail.log
   # Instantiating module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
   # Instantiating module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
   # Instantiating module "IPASS" from file
/etc/freeradius/mods-enabled/realm
   # Instantiating module "suffix" from file
/etc/freeradius/mods-enabled/realm
   # Instantiating module "bangpath" from file
/etc/freeradius/mods-enabled/realm
   # Instantiating module "realmpercent" from file
/etc/freeradius/mods-enabled/realm
   # Instantiating module "ntdomain" from file
/etc/freeradius/mods-enabled/realm
   # Instantiating module "pap" from file
/etc/freeradius/mods-enabled/pap
   # Instantiating module "reject" from file
/etc/freeradius/mods-enabled/always
   # Instantiating module "fail" from file
/etc/freeradius/mods-enabled/always
   # Instantiating module "ok" from file
/etc/freeradius/mods-enabled/always
   # Instantiating module "handled" from file
/etc/freeradius/mods-enabled/always
   # Instantiating module "invalid" from file
/etc/freeradius/mods-enabled/always
   # Instantiating module "userlock" from file
/etc/freeradius/mods-enabled/always
   # Instantiating module "notfound" from file
/etc/freeradius/mods-enabled/always
   # Instantiating module "noop" from file
/etc/freeradius/mods-enabled/always
   # Instantiating module "updated" from file
/etc/freeradius/mods-enabled/always
   # Instantiating module "logintime" from file
/etc/freeradius/mods-enabled/logintime
   # Instantiating module "expiration" from file
/etc/freeradius/mods-enabled/expiration
   # Instantiating module "linelog" from file
/etc/freeradius/mods-enabled/linelog
   # Instantiating module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
   # Instantiating module "eap" from file
/etc/freeradius/mods-enabled/eap
    # Linked to sub-module rlm_eap_pwd
    pwd {
    group = 19
    fragment_size = 1020
    server_id = "[hidden email]"
    }
    # Linked to sub-module rlm_eap_leap
    # Linked to sub-module rlm_eap_gtc
    gtc {
    challenge = "Password: "
    auth_type = "PAP"
    }
    # Linked to sub-module rlm_eap_tls
    tls {
    tls = "tls-common"
    }
    tls-config tls-common {
    verify_depth = 0
    ca_path = "/etc/freeradius/certs"
    pem_file_type = yes
    private_key_file = "/etc/freeradius/certs/letsencrypt/privkey.pem"
    certificate_file = "/etc/freeradius/certs/letsencrypt/fullchain.pem"
    private_key_password = <<< secret >>>
    dh_file = "/etc/freeradius/certs/dh"
    fragment_size = 1024
    include_length = yes
    auto_chain = yes
    check_crl = no
    check_all_crl = no
    cipher_list = "DEFAULT"
    cipher_server_preference = no
    ecdh_curve = "prime256v1"
    disable_tlsv1 = yes
    disable_tlsv1_1 = yes
    tls_max_version = "1.2"
    tls_min_version = "1.2"
     cache {
      enable = no
      lifetime = 24
      max_entries = 255
     }
     verify {
      skip_if_ocsp_ok = no
     }
     ocsp {
      enable = no
      override_cert_url = yes
      url = "http://127.0.0.1/ocsp/"
      use_nonce = yes
      timeout = 0
      softfail = no
     }
    }
Please use tls_min_version and tls_max_version instead of disable_tlsv1
Please use tls_min_version and tls_max_version instead of
disable_tlsv1_2
    # Linked to sub-module rlm_eap_ttls
    ttls {
    tls = "tls-common"
    default_eap_type = "md5"
    copy_request_to_tunnel = yes
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
    }
tls: Using cached TLS configuration from previous invocation
    # Linked to sub-module rlm_eap_peap
    peap {
    tls = "tls-common"
    default_eap_type = "mschapv2"
    copy_request_to_tunnel = yes
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
    }
tls: Using cached TLS configuration from previous invocation
    # Linked to sub-module rlm_eap_mschapv2
    mschapv2 {
    with_ntdomain_hack = no
    send_error = no
    }
  } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
} # server
server inner-tunnel { # from file
/etc/freeradius/sites-enabled/inner-tunnel
  # Loading authenticate {...}
  # Loading authorize {...}
Ignoring "ldap" (see raddb/mods-available/README.rst)
  # Loading session {...}
  # Loading post-proxy {...}
  # Loading post-auth {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
  # Skipping contents of 'if' as it is always 'false' --
/etc/freeradius/sites-enabled/inner-tunnel:337
} # server inner-tunnel
server default { # from file /etc/freeradius/sites-enabled/default
  # Loading authenticate {...}
  # Loading authorize {...}
  # Loading preacct {...}
  # Loading accounting {...}
  # Loading post-proxy {...}
  # Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
    type = "auth"
    ipaddr = 127.0.0.1
    port = 18120
}
listen {
    type = "auth"
    ipaddr = *
    port = 0
    limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
    }
}
listen {
    type = "acct"
    ipaddr = *
    port = 0
    limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
    }
}
listen {
    type = "auth"
    ipv6addr = ::
    port = 0
    limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
    }
}
listen {
    type = "acct"
    ipv6addr = ::
    port = 0
    limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
    }
}
Listening on auth address 127.0.0.1 port 18120 bound to server
inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 35235
Listening on proxy address :: port 53002
Ready to process requests
(0) Received Access-Request Id 181 from 10.10.1.53:50782 to
10.10.1.52:1812 length 253
(0)   User-Name = "[hidden email]"
(0)   NAS-IP-Address = 10.10.4.73
(0)   NAS-Identifier = "f09fc2d797a3"
(0)   Called-Station-Id = "F0-9F-C2-D7-97-A3:kawo-4-test"
(0)   NAS-Port-Type = Wireless-802.11
(0)   Service-Type = Framed-User
(0)   Calling-Station-Id = "D8-C7-71-88-93-83"
(0)   Connect-Info = "CONNECT 0Mbps 802.11b"
(0)   Acct-Session-Id = "0C16F6BAB7CDAC91"
(0)   WLAN-Pairwise-Cipher = 1027076
(0)   WLAN-Group-Cipher = 1027076
(0)   WLAN-AKM-Suite = 1027073
(0)   Framed-MTU = 1400
(0)   EAP-Message =
0x021600210166454179377a4c324239406b61776f332e6b61776f726f616d2e6465
(0)   Message-Authenticator = 0xa149ba1014ced9116687a61f926f3754
(0)   Proxy-State = 0x32
(0) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  
{
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  
-> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: Looking up realm "sub3.domain.de" for User-Name =
"[hidden email]"
(0) suffix: Found realm "sub3.domain.de"
(0) suffix: Adding Stripped-User-Name = "fEAy7zL2B9"
(0) suffix: Adding Realm = "sub3.domain.de"
(0) suffix: Authentication realm is LOCAL
(0)     [suffix] = ok
(0) eap: Peer sent EAP Response (code 2) ID 22 length 33
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_pwd to process data
(0) eap: Sending EAP Request (code 1) ID 23 length 35
(0) eap: EAP session adding &reply:State = 0xa008863aa01fb2af
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 181 from 10.10.1.52:1812 to
10.10.1.53:50782 length 0
(0)   EAP-Message =
0x01170023340100130101c87031e8007261646975732d31406b61776f726f616d2e6465
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0xa008863aa01fb2af1bfb3f8d187c03fc
(0)   Proxy-State = 0x32
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 85 from 10.10.1.53:50782 to
10.10.1.52:1812 length 281
(1)   User-Name = "[hidden email]"
(1)   NAS-IP-Address = 10.10.4.73
(1)   NAS-Identifier = "f09fc2d797a3"
(1)   Called-Station-Id = "F0-9F-C2-D7-97-A3:kawo-4-test"
(1)   NAS-Port-Type = Wireless-802.11
(1)   Service-Type = Framed-User
(1)   Calling-Station-Id = "D8-C7-71-88-93-83"
(1)   Connect-Info = "CONNECT 0Mbps 802.11b"
(1)   Acct-Session-Id = "0C16F6BAB7CDAC91"
(1)   WLAN-Pairwise-Cipher = 1027076
(1)   WLAN-Group-Cipher = 1027076
(1)   WLAN-AKM-Suite = 1027073
(1)   Framed-MTU = 1400
(1)   EAP-Message =
0x0217002b340100130101c87031e80066454179377a4c324239406b61776f332e6b61776f726f616d2e6465
(1)   State = 0xa008863aa01fb2af1bfb3f8d187c03fc
(1)   Message-Authenticator = 0x66090831f65ebd46aec0cd0a4c4ad7a2
(1)   Proxy-State = 0x33
(1) session-state: No cached attributes
(1) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  
{
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  
-> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: Looking up realm "sub3.domain.de" for User-Name =
"[hidden email]"
(1) suffix: Found realm "sub3.domain.de"
(1) suffix: Adding Stripped-User-Name = "fEAy7zL2B9"
(1) suffix: Adding Realm = "sub3.domain.de"
(1) suffix: Authentication realm is LOCAL
(1)     [suffix] = ok
(1) eap: Peer sent EAP Response (code 2) ID 23 length 43
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1) files: EXPAND %{%{Stripped-User-Name}:-%{User-Name}}
(1) files:    --> fEAy7zL2B9
(1) files: users: Matched entry fEAy7zL2B9 at line 102
(1)     [files] = ok
(1)     [expiration] = noop
(1)     [logintime] = noop
(1) pap: WARNING: Auth-Type already set.  Not setting to PAP
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0xa008863aa01fb2af
(1) eap: Finished EAP session with state 0xa008863aa01fb2af
(1) eap: Previous EAP request found for state 0xa008863aa01fb2af,
released from the list
(1) eap: Peer sent packet with method EAP PWD (52)
(1) eap: Calling submodule eap_pwd to process data
(1) eap_pwd: Sending tunneled request
(1) eap_pwd:   User-Name = "[hidden email]"
(1) eap_pwd: server default {
(1) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  
{
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  
-> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: Looking up realm "sub3.domain.de" for User-Name =
"[hidden email]"
(1) suffix: Found realm "sub3.domain.de"
(1) suffix: Adding Stripped-User-Name = "fEAy7zL2B9"
(1) suffix: Adding Realm = "sub3.domain.de"
(1) suffix: Authentication realm is LOCAL
(1)     [suffix] = ok
(1) eap: No EAP-Message, not doing EAP
(1)     [eap] = noop
(1) files: EXPAND %{%{Stripped-User-Name}:-%{User-Name}}
(1) files:    --> fEAy7zL2B9
(1)     [files] = noop
(1)     [expiration] = noop
(1)     [logintime] = noop
(1) pap: WARNING: No "known good" password found for the user.  Not
setting Auth-Type
(1) pap: WARNING: Authentication will fail unless a "known good"
password is available
(1)     [pap] = noop
(1)   } # authorize = ok
(1) eap_pwd: } # server default
(1) eap_pwd: Got tunneled reply code 0
failed to find password for [hidden email] to do pwd
authentication
(1) eap: ERROR: Failed continuing EAP PWD (52) session.  EAP sub-module
failed
(1) eap: Sending EAP Failure (code 4) ID 23 length 4
(1) eap: Failed in EAP select
(1)     [eap] = invalid
(1)   } # authenticate = invalid
(1) Failed to authenticate the user
(1) Using Post-Auth-Type Reject
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1)   Post-Auth-Type REJECT {
(1) attr_filter.access_reject: EXPAND %{User-Name}
(1) attr_filter.access_reject:    --> [hidden email]
(1) attr_filter.access_reject: Matched entry DEFAULT at line 11
(1)     [attr_filter.access_reject] = updated
(1)     [eap] = noop
(1)     policy remove_reply_message_if_eap {
(1)       if (&reply:EAP-Message && &reply:Reply-Message) {
(1)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(1)       else {
(1)         [noop] = noop
(1)       } # else = noop
(1)     } # policy remove_reply_message_if_eap = noop
(1)   } # Post-Auth-Type REJECT = updated
(1) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(1) Sending delayed response
(1) Sent Access-Reject Id 85 from 10.10.1.52:1812 to 10.10.1.53:50782
length 47
(1)   EAP-Message = 0x04170004
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   Proxy-State = 0x33
Waking up in 3.9 seconds.
(0) Cleaning up request packet ID 181 with timestamp +3
(1) Cleaning up request packet ID 85 with timestamp +3
Ready to process requests
(2) Received Access-Request Id 142 from 10.10.1.53:50782 to
10.10.1.52:1812 length 253
(2)   User-Name = "[hidden email]"
(2)   NAS-IP-Address = 10.10.4.73
(2)   NAS-Identifier = "f09fc2d797a3"
(2)   Called-Station-Id = "F0-9F-C2-D7-97-A3:kawo-4-test"
(2)   NAS-Port-Type = Wireless-802.11
(2)   Service-Type = Framed-User
(2)   Calling-Station-Id = "D8-C7-71-88-93-83"
(2)   Connect-Info = "CONNECT 0Mbps 802.11b"
(2)   Acct-Session-Id = "0C16F6BAB7CDAC91"
(2)   WLAN-Pairwise-Cipher = 1027076
(2)   WLAN-Group-Cipher = 1027076
(2)   WLAN-AKM-Suite = 1027073
(2)   Framed-MTU = 1400
(2)   EAP-Message =
0x026700210166454179377a4c324239406b61776f332e6b61776f726f616d2e6465
(2)   Message-Authenticator = 0x19368f6319bcbb1322ff73ca84229e7b
(2)   Proxy-State = 0x34
(2) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  
{
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  
-> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: Looking up realm "sub3.domain.de" for User-Name =
"[hidden email]"
(2) suffix: Found realm "sub3.domain.de"
(2) suffix: Adding Stripped-User-Name = "fEAy7zL2B9"
(2) suffix: Adding Realm = "sub3.domain.de"
(2) suffix: Authentication realm is LOCAL
(2)     [suffix] = ok
(2) eap: Peer sent EAP Response (code 2) ID 103 length 33
(2) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2)   authenticate {
(2) eap: Peer sent packet with method EAP Identity (1)
(2) eap: Calling submodule eap_pwd to process data
(2) eap: Sending EAP Request (code 1) ID 104 length 35
(2) eap: EAP session adding &reply:State = 0xb3cd832cb3a5b776
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 142 from 10.10.1.52:1812 to
10.10.1.53:50782 length 0
(2)   EAP-Message =
0x01680023340100130101ee426e53007261646975732d31406b61776f726f616d2e6465
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0xb3cd832cb3a5b7765c7f5f77510a5869
(2)   Proxy-State = 0x34
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 39 from 10.10.1.53:50782 to
10.10.1.52:1812 length 281
(3)   User-Name = "[hidden email]"
(3)   NAS-IP-Address = 10.10.4.73
(3)   NAS-Identifier = "f09fc2d797a3"
(3)   Called-Station-Id = "F0-9F-C2-D7-97-A3:kawo-4-test"
(3)   NAS-Port-Type = Wireless-802.11
(3)   Service-Type = Framed-User
(3)   Calling-Station-Id = "D8-C7-71-88-93-83"
(3)   Connect-Info = "CONNECT 0Mbps 802.11b"
(3)   Acct-Session-Id = "0C16F6BAB7CDAC91"
(3)   WLAN-Pairwise-Cipher = 1027076
(3)   WLAN-Group-Cipher = 1027076
(3)   WLAN-AKM-Suite = 1027073
(3)   Framed-MTU = 1400
(3)   EAP-Message =
0x0268002b340100130101ee426e530066454179377a4c324239406b61776f332e6b61776f726f616d2e6465
(3)   State = 0xb3cd832cb3a5b7765c7f5f77510a5869
(3)   Message-Authenticator = 0x829059cb3eee952a2e84b4d1ee9c1515
(3)   Proxy-State = 0x35
(3) session-state: No cached attributes
(3) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  
{
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  
-> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: Looking up realm "sub3.domain.de" for User-Name =
"[hidden email]"
(3) suffix: Found realm "sub3.domain.de"
(3) suffix: Adding Stripped-User-Name = "fEAy7zL2B9"
(3) suffix: Adding Realm = "sub3.domain.de"
(3) suffix: Authentication realm is LOCAL
(3)     [suffix] = ok
(3) eap: Peer sent EAP Response (code 2) ID 104 length 43
(3) eap: No EAP Start, assuming it's an on-going EAP conversation
(3)     [eap] = updated
(3) files: EXPAND %{%{Stripped-User-Name}:-%{User-Name}}
(3) files:    --> fEAy7zL2B9
(3) files: users: Matched entry fEAy7zL2B9 at line 102
(3)     [files] = ok
(3)     [expiration] = noop
(3)     [logintime] = noop
(3) pap: WARNING: Auth-Type already set.  Not setting to PAP
(3)     [pap] = noop
(3)   } # authorize = updated
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0xb3cd832cb3a5b776
(3) eap: Finished EAP session with state 0xb3cd832cb3a5b776
(3) eap: Previous EAP request found for state 0xb3cd832cb3a5b776,
released from the list
(3) eap: Peer sent packet with method EAP PWD (52)
(3) eap: Calling submodule eap_pwd to process data
(3) eap_pwd: Sending tunneled request
(3) eap_pwd:   User-Name = "[hidden email]"
(3) eap_pwd: server default {
(3) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  
{
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  
-> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: Looking up realm "sub3.domain.de" for User-Name =
"[hidden email]"
(3) suffix: Found realm "sub3.domain.de"
(3) suffix: Adding Stripped-User-Name = "fEAy7zL2B9"
(3) suffix: Adding Realm = "sub3.domain.de"
(3) suffix: Authentication realm is LOCAL
(3)     [suffix] = ok
(3) eap: No EAP-Message, not doing EAP
(3)     [eap] = noop
(3) files: EXPAND %{%{Stripped-User-Name}:-%{User-Name}}
(3) files:    --> fEAy7zL2B9
(3)     [files] = noop
(3)     [expiration] = noop
(3)     [logintime] = noop
(3) pap: WARNING: No "known good" password found for the user.  Not
setting Auth-Type
(3) pap: WARNING: Authentication will fail unless a "known good"
password is available
(3)     [pap] = noop
(3)   } # authorize = ok
(3) eap_pwd: } # server default
(3) eap_pwd: Got tunneled reply code 0
failed to find password for [hidden email] to do pwd
authentication
(3) eap: ERROR: Failed continuing EAP PWD (52) session.  EAP sub-module
failed
(3) eap: Sending EAP Failure (code 4) ID 104 length 4
(3) eap: Failed in EAP select
(3)     [eap] = invalid
(3)   } # authenticate = invalid
(3) Failed to authenticate the user
(3) Using Post-Auth-Type Reject
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3)   Post-Auth-Type REJECT {
(3) attr_filter.access_reject: EXPAND %{User-Name}
(3) attr_filter.access_reject:    --> [hidden email]
(3) attr_filter.access_reject: Matched entry DEFAULT at line 11
(3)     [attr_filter.access_reject] = updated
(3)     [eap] = noop
(3)     policy remove_reply_message_if_eap {
(3)       if (&reply:EAP-Message && &reply:Reply-Message) {
(3)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(3)       else {
(3)         [noop] = noop
(3)       } # else = noop
(3)     } # policy remove_reply_message_if_eap = noop
(3)   } # Post-Auth-Type REJECT = updated
(3) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(3) Sending delayed response
(3) Sent Access-Reject Id 39 from 10.10.1.52:1812 to 10.10.1.53:50782
length 47
(3)   EAP-Message = 0x04680004
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   Proxy-State = 0x35
Waking up in 3.9 seconds.
(2) Cleaning up request packet ID 142 with timestamp +8
(3) Cleaning up request packet ID 39 with timestamp +8
Ready to process requests


Am 2020-07-27 01:40, schrieb Jorge Pereira:

> Please share the output https://wiki.freeradius.org/guide/radiusd-X
> <https://wiki.freeradius.org/guide/radiusd-X>
>
> ---
> Jorge Pereira
> [hidden email]
>
>
>
>
>> On 26 Jul 2020, at 19:49, psuet <[hidden email]> wrote:
>>
>> Hi,
>>
>> I want to authenticate users with EAP-PWD with
>> ./mods-config/files/authorize and check the used Calling-Station-ID in
>> the process.
>>
>> A example for an entry in the authorize file:
>>> username Calling-Station-Id == "A1-B2-C3-D4-E5-F6" Cleartext-Password
>>> := "password"
>>
>> Authentication works fine for PEAP, but it looks like
>> Calling-Station-ID is not available when the file is checked against
>> when using EAP-PWD. Is there a method to make Calling-Station-Id
>> available to the files mod when using EAP-PWD?
>>
>> (Freeradius 3.0.21)
>>
>> Thanks for any answer!
>>
>> Paul
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
| Threaded
Open this post in threaded view
|

Re: EAP-PWD Authentication with Username and MAC

Alan DeKok-2
On Jul 27, 2020, at 11:18 AM, psuet <[hidden email]> wrote:
> here is my log for a EAP-PWD Authentication and the following content in my authorize file:
>
> "fEAy7zL2B9" Calling-Station-Id == "D8-C7-71-88-93-83", Cleartext-Password := "password"
>        Tunnel-Type = 13,
>        Tunnel-Medium-Type = 6,
>        Tunnel-Private-Group-Id = 3706
>
> Thanks for any answer!

  You didn't set "virtual_server" in the pwd module.

> eap {
>   default_eap_type = "pwd"
>   timer_expire = 60
>   ignore_unknown_eap_types = no
>   cisco_accounting_username_bug = no
>   max_sessions = 16384
>  }
> ...
>   # Linked to sub-module rlm_eap_pwd
>   pwd {
>   group = 19
>   fragment_size = 1020
>   server_id = "[hidden email]"
>   }

  See the comments in the default configuration.

> ...
> (3) eap: Calling submodule eap_pwd to process data
> (3) eap_pwd: Sending tunneled request
> (3) eap_pwd:   User-Name = "[hidden email]"
> (3) eap_pwd: server default {

  Which means it's running the packet through the default virtual server again.

  Note that the User-Name printed here is NOT the same as the one you put into the "authorize" file.

  In order for the file to match, the names have to match.

> (3) suffix: Checking for suffix after "@"
> (3) suffix: Looking up realm "sub3.domain.de" for User-Name = "[hidden email]"
> (3) suffix: Found realm "sub3.domain.de"
> (3) suffix: Adding Stripped-User-Name = "fEAy7zL2B9"
> (3) suffix: Adding Realm = "sub3.domain.de"
> (3) suffix: Authentication realm is LOCAL
> (3)     [suffix] = ok
> (3) eap: No EAP-Message, not doing EAP
> (3)     [eap] = noop
> (3) files: EXPAND %{%{Stripped-User-Name}:-%{User-Name}}
> (3) files:    --> fEAy7zL2B9
> (3)     [files] = noop

  Hmm... that should match.  Are you sure that you put the entry into the "authorize" file?  If so, where?
 
  Alan DeKok.


-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
| Threaded
Open this post in threaded view
|

Re: EAP-PWD Authentication with Username and MAC

Matthew Newton-3


On 27/07/2020 16:30, Alan DeKok wrote:
> On Jul 27, 2020, at 11:18 AM, psuet <[hidden email]> wrote:
>> here is my log for a EAP-PWD Authentication and the following content in my authorize file:
>>
>> "fEAy7zL2B9" Calling-Station-Id == "D8-C7-71-88-93-83", Cleartext-Password := "password"
>>         Tunnel-Type = 13,
>>         Tunnel-Medium-Type = 6,
>>         Tunnel-Private-Group-Id = 3706

...

>> (3)     [eap] = noop
>> (3) files: EXPAND %{%{Stripped-User-Name}:-%{User-Name}}
>> (3) files:    --> fEAy7zL2B9
>> (3)     [files] = noop
>
>    Hmm... that should match.  Are you sure that you put the entry into the "authorize" file?  If so, where?

Does pwd copy all attributes over to the virtual server by default?
Possibly needs

   update request {
     &Calling-Station-Id = &outer.request:Calling-Station-Id
   }

at the top of authorize{}?

But in a dedicated virtual server of course.

--
Matthew
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
| Threaded
Open this post in threaded view
|

Re: EAP-PWD Authentication with Username and MAC

Alan DeKok-2
On Jul 27, 2020, at 11:42 AM, Matthew Newton <[hidden email]> wrote:
> Does pwd copy all attributes over to the virtual server by default?

  No, it doesn't.

> Possibly needs
>
>  update request {
>    &Calling-Station-Id = &outer.request:Calling-Station-Id
>  }
>
> at the top of authorize{}?
>
> But in a dedicated virtual server of course.

  Yes.

  Alan DeKok.

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html