Cannot connect with EAP-TTLS + MS-CHAPv2. if you'd kindly teach me.

classic Classic list List threaded Threaded
7 messages Options
| Threaded
Open this post in threaded view
|

Cannot connect with EAP-TTLS + MS-CHAPv2. if you'd kindly teach me.

Yuya Yanagi
Hello!

I am sorry that my English is so bad.

Last time, after I was asked a question with EAP-TTLS + MS-CHAPv2, I
tried my best to troubleshoot
I couldn't solve it at all, so please help.

We are replacing from freeradius v2 to freeradius v3, the settings
will take over the previous contents, and the Wifi authentication
method will not change from EAP-TTLS + MS-CHAPv2
It is a specification and customer request.

In freeradius v2 environment, you can connect with EAP-TTLS +
MS-CHAPv2. In Freeradius v3, you can connect with EAP-TTLS + PAP, but
you cannot connect with MS-CHAPv2.

There is no AD in this environment, everything is done with LDAP, and
the password is stored in LDAP with NT Hash. Mapping has the following
two mappings. (LDAP is OpenLDAP use )

control:NT-Password         :=      'sambaNtPassword'
control:User-Password         :=      'sambaNtPassword'

In the authentication section I am trying to reference LDAP with Auth-Type LDAP
The following error occurs and there is no inquiry.

(6) ldap_regularusers: WARNING: You have set "Auth-Type := LDAP" somewhere
(6) ldap_regularusers: WARNING: *********************************************
(6) ldap_regularusers: WARNING: * THAT CONFIGURATION IS WRONG.  DELETE IT.
(6) ldap_regularusers: WARNING: * YOU ARE PREVENTING THE SERVER FROM WORKING
(6) ldap_regularusers: WARNING: *********************************************
(6) ldap_regularusers: ERROR: Attribute "User-Password" is required
for authentication

Please help us solve this problem.
Paste the debug log. Please indicate any other information you need.

Please help us!

==================================

FreeRADIUS Version 3.0.13
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/date
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/ldap
including configuration file /etc/raddb/mods-available/ldap.attrmap
including configuration file /etc/raddb/mods-available/ldap.attrmap
including configuration file /etc/raddb/mods-available/ldap.attrmap
including configuration file /etc/raddb/mods-enabled/sql
including configuration file /etc/raddb/mods-config/sql/main/mysql/queries.conf
including configuration file /etc/raddb/mods-config/sql/main/mysql/queries.conf
including configuration file /etc/raddb/mods-enabled/eap
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
 security {
  user = "radiusd"
  group = "radiusd"
  allow_core_dumps = no
 }
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
 log {
  stripped_names = no
  auth = yes
  auth_badpass = yes
  auth_goodpass = yes
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
  max_attributes = 200
  reject_delay = 1.000000
  status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = yes
  dead_time = 120
  wake_all_if_all_dead = no
 }
 realm ~^(.+\.)?hoge\.ac\.jp$ {
authhost = LOCAL
accthost = LOCAL
 }
 realm NULL {
authhost = LOCAL
accthost = LOCAL
 }
radiusd: #### Loading Clients ####
 client localhost {
  ipaddr = 127.0.0.1
  require_message_authenticator = no
  secret = <<< secret >>>
  nas_type = "other"
  proto = "*"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client top_radius_nii_ver2 {
  ipaddr = 210.151.94.178
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client top_radius_ver2 {
  ipaddr = 210.151.94.186
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client 133.15.250.241 {
  require_message_authenticator = no
  secret = <<< secret >>>
  shortname = "netwlc01"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
133.15.250.241. Please fix your configuration
Support for old-style clients will be removed in a future release
 client 133.15.250.242 {
  require_message_authenticator = no
  secret = <<< secret >>>
  shortname = "netwlc02"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
133.15.250.242. Please fix your configuration
Support for old-style clients will be removed in a future release
 client 133.15.250.243 {
  require_message_authenticator = no
  secret = <<< secret >>>
  shortname = "netwlauth01"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
133.15.250.243. Please fix your configuration
Support for old-style clients will be removed in a future release
 client 133.15.250.244 {
  require_message_authenticator = no
  secret = <<< secret >>>
  shortname = "netwlauth02"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
133.15.250.244. Please fix your configuration
Support for old-style clients will be removed in a future release
 client 133.15.250.245 {
  require_message_authenticator = no
  secret = <<< secret >>>
  shortname = "netwlauth"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
133.15.250.245. Please fix your configuration
Support for old-style clients will be removed in a future release
 client 133.15.250.254 {
  require_message_authenticator = no
  secret = <<< secret >>>
  shortname = "netmgmtfw"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
133.15.250.254. Please fix your configuration
Support for old-style clients will be removed in a future release
 client 133.15.251.3 {
  require_message_authenticator = no
  secret = <<< secret >>>
  shortname = "netfw_gwvpn"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
133.15.251.3. Please fix your configuration
Support for old-style clients will be removed in a future release
 client 133.15.254.4 {
  require_message_authenticator = no
  secret = <<< secret >>>
  shortname = "netguestnat"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
133.15.254.4. Please fix your configuration
Support for old-style clients will be removed in a future release
 client 133.15.250.10 {
  require_message_authenticator = no
  secret = <<< secret >>>
  shortname = "netwifinat"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
133.15.250.10. Please fix your configuration
Support for old-style clients will be removed in a future release
 client 133.15.250.230 {
  require_message_authenticator = no
  secret = <<< secret >>>
  shortname = "netms"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
133.15.250.230. Please fix your configuration
Support for old-style clients will be removed in a future release
 client 133.15.103.32 {
  require_message_authenticator = no
  secret = <<< secret >>>
  shortname = "radius0"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
133.15.103.32. Please fix your configuration
Support for old-style clients will be removed in a future release
 client 133.15.103.33 {
  require_message_authenticator = no
  secret = <<< secret >>>
  shortname = "radius1"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
133.15.103.33. Please fix your configuration
Support for old-style clients will be removed in a future release
 client 133.15.64.48 {
  require_message_authenticator = no
  secret = <<< secret >>>
  shortname = "nakamura-test"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
133.15.64.48. Please fix your configuration
Support for old-style clients will be removed in a future release
 client 192.168.0.0/16 {
  require_message_authenticator = no
  secret = <<< secret >>>
  shortname = "n-test"
  nas_type = "other"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
192.168.0.0/16. Please fix your configuration
Support for old-style clients will be removed in a future release
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = eap
 # Creating Auth-Type = MS-CHAP
 # Creating Auth-Type = LDAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/raddb/mods-enabled/always
  always reject {
  rcode = "reject"
  simulcount = 0
  mpp = no
  }
  # Loading module "fail" from file /etc/raddb/mods-enabled/always
  always fail {
  rcode = "fail"
  simulcount = 0
  mpp = no
  }
  # Loading module "ok" from file /etc/raddb/mods-enabled/always
  always ok {
  rcode = "ok"
  simulcount = 0
  mpp = no
  }
  # Loading module "handled" from file /etc/raddb/mods-enabled/always
  always handled {
  rcode = "handled"
  simulcount = 0
  mpp = no
  }
  # Loading module "invalid" from file /etc/raddb/mods-enabled/always
  always invalid {
  rcode = "invalid"
  simulcount = 0
  mpp = no
  }
  # Loading module "userlock" from file /etc/raddb/mods-enabled/always
  always userlock {
  rcode = "userlock"
  simulcount = 0
  mpp = no
  }
  # Loading module "notfound" from file /etc/raddb/mods-enabled/always
  always notfound {
  rcode = "notfound"
  simulcount = 0
  mpp = no
  }
  # Loading module "noop" from file /etc/raddb/mods-enabled/always
  always noop {
  rcode = "noop"
  simulcount = 0
  mpp = no
  }
  # Loading module "updated" from file /etc/raddb/mods-enabled/always
  always updated {
  rcode = "updated"
  simulcount = 0
  mpp = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  filename = "/etc/raddb/mods-config/attr_filter/access_reject"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
  driver = "rlm_cache_rbtree"
  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  ttl = 15
  max_entries = 0
  epoch = 0
  add_stats = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/raddb/mods-enabled/chap
  # Loaded module rlm_date
  # Loading module "date" from file /etc/raddb/mods-enabled/date
  date {
  format = "%b %e %Y %H:%M:%S %Z"
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/raddb/mods-enabled/detail
  detail {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
  detail auth_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
  detail reply_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_dhcp
  # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/raddb/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/raddb/mods-enabled/echo
  exec echo {
  wait = yes
  program = "/bin/echo %{User-Name}"
  input_pairs = "request"
  output_pairs = "reply"
  shell_escape = yes
  }
  # Loading module "exec" from file /etc/raddb/mods-enabled/exec
  exec {
  wait = no
  input_pairs = "request"
  shell_escape = yes
  timeout = 10
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/raddb/mods-enabled/expr
  expr {
  safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/raddb/mods-enabled/files
  files {
  filename = "/etc/raddb/mods-config/files/authorize"
  acctusersfile = "/etc/raddb/mods-config/files/accounting"
  preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
  linelog {
  filename = "/var/log/radius/linelog"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = "This is a log message for %{User-Name}"
  reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog
  linelog log_accounting {
  filename = "/var/log/radius/linelog-accounting"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = ""
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
  logintime {
  minimum_timeout = 60
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
  mschap {
  use_mppe = yes
  require_encryption = yes
  require_strong = yes
  with_ntdomain_hack = yes
   passchange {
   }
  allow_retry = yes
  winbind_retry_with_normalised_username = no
  }
  # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
  wait = yes
  program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
  shell_escape = yes
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/raddb/mods-enabled/pap
  pap {
  normalise = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
  filename = "/etc/passwd"
  format = "*User-Name:Crypt-Password:"
  delimiter = ":"
  ignore_nislike = no
  ignore_empty = yes
  allow_multiple_keys = no
  hash_size = 100
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
  preprocess {
  huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
  hints = "/etc/raddb/mods-config/preprocess/hints"
  with_ascend_hack = no
  ascend_channels_per_line = 23
  with_ntdomain_hack = no
  with_specialix_jetstream_hack = no
  with_cisco_vsa_hack = no
  with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
  radutmp {
  filename = "/var/log/radius/radutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 384
  caller_id = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
  realm IPASS {
  format = "prefix"
  delimiter = "/"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
  realm suffix {
  format = "suffix"
  delimiter = "@"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
  realm realmpercent {
  format = "suffix"
  delimiter = "%"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
  realm ntdomain {
  format = "prefix"
  delimiter = "\\"
  ignore_default = no
  ignore_null = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/raddb/mods-enabled/soh
  soh {
  dhcp = yes
  }
  # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
  filename = "/var/log/radius/sradutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 420
  caller_id = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/raddb/mods-enabled/unix
  unix {
  radwtmp = "/var/log/radius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
  # Loaded module rlm_ldap
  # Loading module "ldap_allusers" from file /etc/raddb/mods-enabled/ldap
  ldap ldap_allusers {
  server = "ldap://tyg-ldap-01"
  port = 636
  identity = "uid=radius,ou=systems,dc=edu,dc=hoge,dc=ac,dc=jp"
  password = <<< secret >>>
   sasl {
   }
   user {
    scope = "sub"
    access_positive = yes
    sasl {
    }
   }
   group {
    scope = "sub"
    name_attribute = "cn"
    cacheable_name = no
    cacheable_dn = no
   }
   client {
    scope = "sub"
    base_dn = ""
   }
   profile {
   }
   options {
    ldap_debug = 0
    net_timeout = 1
    res_timeout = 20
    srv_timelimit = 20
    idle = 60
    probes = 3
    interval = 3
   }
   tls {
    ca_file = "/etc/raddb/certs/ldap-client.pem"
    start_tls = no
   }
  }
Creating attribute ldap_allusers-LDAP-Group
  # Loading module "ldap_regularusers" from file /etc/raddb/mods-enabled/ldap
  ldap ldap_regularusers {
  server = "ldap://tyg-ldap-01"
  port = 636
  identity = "uid=radius,ou=systems,dc=edu,dc=hoge,dc=ac,dc=jp"
  password = <<< secret >>>
   sasl {
   }
   user {
    scope = "sub"
    access_positive = yes
    sasl {
    }
   }
   group {
    scope = "sub"
    name_attribute = "cn"
    cacheable_name = no
    cacheable_dn = no
   }
   client {
    scope = "sub"
    base_dn = ""
   }
   profile {
   }
   options {
    ldap_debug = 0
    net_timeout = 1
    res_timeout = 20
    srv_timelimit = 20
    idle = 60
    probes = 3
    interval = 3
   }
   tls {
    ca_file = "/etc/raddb/certs/ldap-client.pem"
    start_tls = no
   }
  }
Creating attribute ldap_regularusers-LDAP-Group
  # Loading module "ldap_participant" from file /etc/raddb/mods-enabled/ldap
  ldap ldap_participant {
  server = "ldap://tyg-ldap-01"
  port = 636
  identity = "uid=radius,ou=systems,dc=edu,dc=hoge,dc=ac,dc=jp"
  password = <<< secret >>>
   sasl {
   }
   user {
    scope = "sub"
    access_positive = yes
    sasl {
    }
   }
   group {
    scope = "sub"
    name_attribute = "cn"
    cacheable_name = no
    cacheable_dn = no
   }
   client {
    scope = "sub"
    base_dn = ""
   }
   profile {
   }
   options {
    ldap_debug = 0
    net_timeout = 10
    res_timeout = 20
    srv_timelimit = 20
    idle = 60
    probes = 3
    interval = 30
   }
   tls {
    ca_file = "/etc/raddb/certs/ldap-client.pem"
    start_tls = no
   }
  }
Creating attribute ldap_participant-LDAP-Group
  # Loaded module rlm_sql
  # Loading module "hpcportal_vpn" from file /etc/raddb/mods-enabled/sql
  sql hpcportal_vpn {
  driver = "rlm_sql_mysql"
  server = "192.168.10.10"
  port = 3306
  login = "root"
  password = <<< secret >>>
  radius_db = "radius"
  read_groups = yes
  read_profiles = yes
  read_clients = no
  delete_stale_sessions = yes
  sql_user_name = "%{User-Name}"
  default_user_profile = ""
  client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
  authorize_check_query = "SELECT id, username, attribute, value, op
FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
  authorize_reply_query = "SELECT id, username, attribute, value, op
FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
  group_membership_query = "SELECT groupname FROM radusergroup WHERE
username = '%{SQL-User-Name}' ORDER BY priority"
  simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username =
'%{SQL-User-Name}' AND acctstoptime IS NULL"
  simul_verify_query = "SELECT radacctid, acctsessionid, username,
nasipaddress, nasportid, framedipaddress, callingstationid,
framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND
acctstoptime IS NULL"
  safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/"
   accounting {
    reference = "%{tolower:type.%{Acct-Status-Type}.query}"
    type {
     accounting-on {
      query = "UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
'%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND
acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
     }
     accounting-off {
      query = "UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
'%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND
acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
     }
     start {
      query = "INSERT INTO radacct (acctsessionid, acctuniqueid,
username, realm, nasipaddress, nasportid, nasporttype, acctstarttime,
acctupdatetime, acctstoptime, acctsessiontime, acctauthentic,
connectinfo_start, connectinfo_stop, acctinputoctets,
acctoutputoctets, calledstationid, callingstationid,
acctterminatecause, servicetype, framedprotocol, framedipaddress)
VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}',
'%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}',
FROM_UNIXTIME(%{integer:Event-Timestamp}),
FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0',
'%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
'%{Called-Station-Id}', '%{Calling-Station-Id}', '',
'%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')"
     }
     interim-update {
      query = "UPDATE radacct SET acctupdatetime  =
(@acctupdatetime_old:=acctupdatetime), acctupdatetime  =
FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval    =
%{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old),
framedipaddress = '%{Framed-IP-Address}', acctsessiontime =
%{%{Acct-Session-Time}:-NULL}, acctinputoctets =
'%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId =
'%{Acct-Unique-Session-Id}'"
     }
     stop {
      query = "UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
%{%{Acct-Session-Time}:-NULL}, acctinputoctets =
'%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}', acctterminatecause =
'%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
AcctUniqueId = '%{Acct-Unique-Session-Id}'"
     }
    }
   }
   post-auth {
    reference = ".query"
    query = "INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')"
   }
  }
rlm_sql (hpcportal_vpn): Driver rlm_sql_mysql (module rlm_sql_mysql)
loaded and linked
Creating attribute hpcportal_vpn-SQL-Group
  # Loading module "hpcportal_wifi" from file /etc/raddb/mods-enabled/sql
  sql hpcportal_wifi {
  driver = "rlm_sql_mysql"
  server = "192.168.10.10"
  port = 3306
  login = "root"
  password = <<< secret >>>
  radius_db = "radius"
  read_groups = yes
  read_profiles = yes
  read_clients = yes
  delete_stale_sessions = yes
  sql_user_name = "%{User-Name}"
  default_user_profile = ""
  client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
  authorize_check_query = "SELECT id, username, attribute, value, op
FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
  authorize_reply_query = "SELECT id, username, attribute, value, op
FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
  group_membership_query = "SELECT groupname FROM radusergroup WHERE
username = '%{SQL-User-Name}' ORDER BY priority"
  simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username =
'%{SQL-User-Name}' AND acctstoptime IS NULL"
  simul_verify_query = "SELECT radacctid, acctsessionid, username,
nasipaddress, nasportid, framedipaddress, callingstationid,
framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND
acctstoptime IS NULL"
  safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/"
   accounting {
    reference = "%{tolower:type.%{Acct-Status-Type}.query}"
    type {
     accounting-on {
      query = "UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
'%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND
acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
     }
     accounting-off {
      query = "UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
'%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND
acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
     }
     start {
      query = "INSERT INTO radacct (acctsessionid, acctuniqueid,
username, realm, nasipaddress, nasportid, nasporttype, acctstarttime,
acctupdatetime, acctstoptime, acctsessiontime, acctauthentic,
connectinfo_start, connectinfo_stop, acctinputoctets,
acctoutputoctets, calledstationid, callingstationid,
acctterminatecause, servicetype, framedprotocol, framedipaddress)
VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}',
'%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}',
FROM_UNIXTIME(%{integer:Event-Timestamp}),
FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0',
'%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
'%{Called-Station-Id}', '%{Calling-Station-Id}', '',
'%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')"
     }
     interim-update {
      query = "UPDATE radacct SET acctupdatetime  =
(@acctupdatetime_old:=acctupdatetime), acctupdatetime  =
FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval    =
%{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old),
framedipaddress = '%{Framed-IP-Address}', acctsessiontime =
%{%{Acct-Session-Time}:-NULL}, acctinputoctets =
'%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId =
'%{Acct-Unique-Session-Id}'"
     }
     stop {
      query = "UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
%{%{Acct-Session-Time}:-NULL}, acctinputoctets =
'%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}', acctterminatecause =
'%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
AcctUniqueId = '%{Acct-Unique-Session-Id}'"
     }
    }
   }
   post-auth {
    reference = ".query"
    query = "INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')"
   }
  }
rlm_sql (hpcportal_wifi): Driver rlm_sql_mysql (module rlm_sql_mysql)
loaded and linked
Creating attribute hpcportal_wifi-SQL-Group
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/raddb/mods-enabled/eap
  eap {
  default_eap_type = "ttls"
  timer_expire = 60
  ignore_unknown_eap_types = no
  cisco_accounting_username_bug = no
  max_sessions = 16384
  }
  instantiate {
  }
  # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
  # Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay-USec" found in filter list for realm
"DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module
rlm_cache_rbtree) loaded and linked
  # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
  # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  # Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
  # Instantiating module "files" from file /etc/raddb/mods-enabled/files
reading pairlist file /etc/raddb/mods-config/files/authorize
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
  # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
  # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
  # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
  # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "ldap_allusers" from file /etc/raddb/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20444
rlm_ldap (ldap_allusers): Couldn't find configuration for accounting,
will return NOOP for calls from this section
rlm_ldap (ldap_allusers): Couldn't find configuration for post-auth,
will return NOOP for calls from this section
rlm_ldap (ldap_allusers): Initialising connection pool
   pool {
    start = 5
    min = 5
    max = 10
    spare = 3
    uses = 0
    lifetime = 0
    cleanup_interval = 30
    idle_timeout = 60
    retry_delay = 1
    spread = no
   }
rlm_ldap (ldap_allusers): Opening additional connection (0), 1 of 10
pending slots used
rlm_ldap (ldap_allusers): Connecting to ldap://tyg-ldap-01:636
rlm_ldap (ldap_allusers): Waiting for bind result...
rlm_ldap (ldap_allusers): Bind successful
rlm_ldap (ldap_allusers): Opening additional connection (1), 1 of 9
pending slots used
rlm_ldap (ldap_allusers): Connecting to ldap://tyg-ldap-01:636
rlm_ldap (ldap_allusers): Waiting for bind result...
rlm_ldap (ldap_allusers): Bind successful
rlm_ldap (ldap_allusers): Opening additional connection (2), 1 of 8
pending slots used
rlm_ldap (ldap_allusers): Connecting to ldap://tyg-ldap-01:636
rlm_ldap (ldap_allusers): Waiting for bind result...
rlm_ldap (ldap_allusers): Bind successful
rlm_ldap (ldap_allusers): Opening additional connection (3), 1 of 7
pending slots used
rlm_ldap (ldap_allusers): Connecting to ldap://tyg-ldap-01:636
rlm_ldap (ldap_allusers): Waiting for bind result...
rlm_ldap (ldap_allusers): Bind successful
rlm_ldap (ldap_allusers): Opening additional connection (4), 1 of 6
pending slots used
rlm_ldap (ldap_allusers): Connecting to ldap://tyg-ldap-01:636
rlm_ldap (ldap_allusers): Waiting for bind result...
rlm_ldap (ldap_allusers): Bind successful
  # Instantiating module "ldap_regularusers" from file
/etc/raddb/mods-enabled/ldap
rlm_ldap (ldap_regularusers): Couldn't find configuration for
accounting, will return NOOP for calls from this section
rlm_ldap (ldap_regularusers): Couldn't find configuration for
post-auth, will return NOOP for calls from this section
rlm_ldap (ldap_regularusers): Initialising connection pool
   pool {
    start = 5
    min = 5
    max = 10
    spare = 3
    uses = 0
    lifetime = 0
    cleanup_interval = 30
    idle_timeout = 60
    retry_delay = 1
    spread = no
   }
rlm_ldap (ldap_regularusers): Opening additional connection (0), 1 of
10 pending slots used
rlm_ldap (ldap_regularusers): Connecting to ldap://tyg-ldap-01:636
rlm_ldap (ldap_regularusers): Waiting for bind result...
rlm_ldap (ldap_regularusers): Bind successful
rlm_ldap (ldap_regularusers): Opening additional connection (1), 1 of
9 pending slots used
rlm_ldap (ldap_regularusers): Connecting to ldap://tyg-ldap-01:636
rlm_ldap (ldap_regularusers): Waiting for bind result...
rlm_ldap (ldap_regularusers): Bind successful
rlm_ldap (ldap_regularusers): Opening additional connection (2), 1 of
8 pending slots used
rlm_ldap (ldap_regularusers): Connecting to ldap://tyg-ldap-01:636
rlm_ldap (ldap_regularusers): Waiting for bind result...
rlm_ldap (ldap_regularusers): Bind successful
rlm_ldap (ldap_regularusers): Opening additional connection (3), 1 of
7 pending slots used
rlm_ldap (ldap_regularusers): Connecting to ldap://tyg-ldap-01:636
rlm_ldap (ldap_regularusers): Waiting for bind result...
rlm_ldap (ldap_regularusers): Bind successful
rlm_ldap (ldap_regularusers): Opening additional connection (4), 1 of
6 pending slots used
rlm_ldap (ldap_regularusers): Connecting to ldap://tyg-ldap-01:636
rlm_ldap (ldap_regularusers): Waiting for bind result...
rlm_ldap (ldap_regularusers): Bind successful
  # Instantiating module "ldap_participant" from file
/etc/raddb/mods-enabled/ldap
rlm_ldap (ldap_participant): Couldn't find configuration for
accounting, will return NOOP for calls from this section
rlm_ldap (ldap_participant): Couldn't find configuration for
post-auth, will return NOOP for calls from this section
rlm_ldap (ldap_participant): Initialising connection pool
   pool {
    start = 5
    min = 5
    max = 10
    spare = 3
    uses = 0
    lifetime = 0
    cleanup_interval = 30
    idle_timeout = 60
    retry_delay = 1
    spread = no
   }
rlm_ldap (ldap_participant): Opening additional connection (0), 1 of
10 pending slots used
rlm_ldap (ldap_participant): Connecting to ldap://tyg-ldap-01:636
rlm_ldap (ldap_participant): Waiting for bind result...
rlm_ldap (ldap_participant): Bind successful
rlm_ldap (ldap_participant): Opening additional connection (1), 1 of 9
pending slots used
rlm_ldap (ldap_participant): Connecting to ldap://tyg-ldap-01:636
rlm_ldap (ldap_participant): Waiting for bind result...
rlm_ldap (ldap_participant): Bind successful
rlm_ldap (ldap_participant): Opening additional connection (2), 1 of 8
pending slots used
rlm_ldap (ldap_participant): Connecting to ldap://tyg-ldap-01:636
rlm_ldap (ldap_participant): Waiting for bind result...
rlm_ldap (ldap_participant): Bind successful
rlm_ldap (ldap_participant): Opening additional connection (3), 1 of 7
pending slots used
rlm_ldap (ldap_participant): Connecting to ldap://tyg-ldap-01:636
rlm_ldap (ldap_participant): Waiting for bind result...
rlm_ldap (ldap_participant): Bind successful
rlm_ldap (ldap_participant): Opening additional connection (4), 1 of 6
pending slots used
rlm_ldap (ldap_participant): Connecting to ldap://tyg-ldap-01:636
rlm_ldap (ldap_participant): Waiting for bind result...
rlm_ldap (ldap_participant): Bind successful
  # Instantiating module "hpcportal_vpn" from file /etc/raddb/mods-enabled/sql
rlm_sql_mysql: libmysql version: 5.5.60-MariaDB
   mysql {
    tls {
    }
    warnings = "auto"
   }
rlm_sql (hpcportal_vpn): Attempting to connect to database "radius"
rlm_sql (hpcportal_vpn): Initialising connection pool
   pool {
    start = 5
    min = 5
    max = 10
    spare = 3
    uses = 0
    lifetime = 0
    cleanup_interval = 30
    idle_timeout = 60
    retry_delay = 1
    spread = no
   }
rlm_sql (hpcportal_vpn): Opening additional connection (0), 1 of 10
pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.10 via
TCP/IP, server version 5.5.60-MariaDB, protocol version 10
rlm_sql (hpcportal_vpn): Opening additional connection (1), 1 of 9
pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.10 via
TCP/IP, server version 5.5.60-MariaDB, protocol version 10
rlm_sql (hpcportal_vpn): Opening additional connection (2), 1 of 8
pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.10 via
TCP/IP, server version 5.5.60-MariaDB, protocol version 10
rlm_sql (hpcportal_vpn): Opening additional connection (3), 1 of 7
pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.10 via
TCP/IP, server version 5.5.60-MariaDB, protocol version 10
rlm_sql (hpcportal_vpn): Opening additional connection (4), 1 of 6
pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.10 via
TCP/IP, server version 5.5.60-MariaDB, protocol version 10
  # Instantiating module "hpcportal_wifi" from file /etc/raddb/mods-enabled/sql
   mysql {
    tls {
    }
    warnings = "auto"
   }
rlm_sql (hpcportal_wifi): Attempting to connect to database "radius"
rlm_sql (hpcportal_wifi): Initialising connection pool
   pool {
    start = 5
    min = 5
    max = 10
    spare = 3
    uses = 0
    lifetime = 0
    cleanup_interval = 30
    idle_timeout = 60
    retry_delay = 1
    spread = no
   }
rlm_sql (hpcportal_wifi): Opening additional connection (0), 1 of 10
pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.10 via
TCP/IP, server version 5.5.60-MariaDB, protocol version 10
rlm_sql (hpcportal_wifi): Opening additional connection (1), 1 of 9
pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.10 via
TCP/IP, server version 5.5.60-MariaDB, protocol version 10
rlm_sql (hpcportal_wifi): Opening additional connection (2), 1 of 8
pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.10 via
TCP/IP, server version 5.5.60-MariaDB, protocol version 10
rlm_sql (hpcportal_wifi): Opening additional connection (3), 1 of 7
pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.10 via
TCP/IP, server version 5.5.60-MariaDB, protocol version 10
rlm_sql (hpcportal_wifi): Opening additional connection (4), 1 of 6
pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.10 via
TCP/IP, server version 5.5.60-MariaDB, protocol version 10
rlm_sql (hpcportal_wifi): Processing generate_sql_clients
rlm_sql (hpcportal_wifi) in generate_sql_clients: query is SELECT id,
nasname, shortname, type, secret, server FROM nas
rlm_sql (hpcportal_wifi): Reserved connection (0)
rlm_sql (hpcportal_wifi): Executing select query: SELECT id, nasname,
shortname, type, secret, server FROM nas
rlm_sql (hpcportal_wifi): Released connection (0)
  # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = yes
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
   tls-config tls-common {
    verify_depth = 0
    ca_path = "/etc/raddb/dev_certs"
    pem_file_type = yes
    private_key_file = "/etc/raddb/dev_certs/tyg-radius01_key.pem"
    certificate_file = "/etc/raddb/dev_certs/tyg-radius01_crt.pem"
    ca_file = "/etc/raddb/dev_certs/chainCA_crt.pem"
    dh_file = "/etc/raddb/dev_certs/dh"
    random_file = "/dev/urandom"
    fragment_size = 1024
    include_length = yes
    auto_chain = yes
    check_crl = yes
    check_all_crl = no
    cipher_server_preference = no
    ecdh_curve = "prime256v1"
    cache {
    enable = no
    lifetime = 24
    max_entries = 255
    }
    verify {
    skip_if_ocsp_ok = no
    }
    ocsp {
    enable = no
    override_cert_url = no
    use_nonce = yes
    timeout = 0
    softfail = no
    }
   }
   # Linked to sub-module rlm_eap_peap
   peap {
    tls = "tls-common"
    default_eap_type = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' --
/etc/raddb/sites-enabled/inner-tunnel:480
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
  type = "auth"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipaddr = 127.0.0.1
  port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Ready to process requests
(0) Received Access-Request Id 169 from 192.168.200.240:32768 to
192.168.10.12:1812 length 208
(0)   User-Name = "anonymous"
(0)   Calling-Station-Id = "a0-88-69-d3-38-a8"
(0)   Called-Station-Id = "00-1c-f9-04-f6-d0:BLUE"
(0)   NAS-Port = 1
(0)   Cisco-AVPair = "audit-session-id=c0a8c8f0000000145d04406e"
(0)   NAS-IP-Address = 192.168.200.240
(0)   NAS-Identifier = "WLC4400"
(0)   Airespace-Wlan-Id = 1
(0)   Service-Type = Framed-User
(0)   Framed-MTU = 1300
(0)   NAS-Port-Type = Wireless-802.11
(0)   EAP-Message = 0x0202000e01616e6f6e796d6f7573
(0)   Message-Authenticator = 0x4c8225dc1f43f05defd7c44742bad6a2
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0)   authorize {
(0)     policy rewrite_called_station_id {
(0)       if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
{
(0)       if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 -> TRUE
(0)       if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 {
(0)         update request {
(0)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(0)              --> 00-1C-F9-04-F6-D0
(0)           &Called-Station-Id := 00-1C-F9-04-F6-D0
(0)         } # update request = noop
(0)         if ("%{8}") {
(0)         EXPAND %{8}
(0)            --> BLUE
(0)         if ("%{8}")  -> TRUE
(0)         if ("%{8}")  {
(0)           update request {
(0)             EXPAND %{8}
(0)                --> BLUE
(0)             &Called-Station-SSID := BLUE
(0)           } # update request = noop
(0)         } # if ("%{8}")  = noop
(0)         [updated] = updated
(0)       } # if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 = updated
(0)       ... skipping else: Preceding "if" was taken
(0)     } # policy rewrite_called_station_id = updated
(0)     if (&outer.request) {
(0)     if (&outer.request)  -> FALSE
(0)     [preprocess] = ok
(0)     [mschap] = noop
(0)     [digest] = noop
(0) eap: Peer sent EAP Response (code 2) ID 2 length 14
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit
the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_ttls to process data
(0) eap_ttls: Initiating new EAP-TLS session
(0) eap_ttls: [eaptls start] = request
(0) eap: Sending EAP Request (code 1) ID 3 length 6
(0) eap: EAP session adding &reply:State = 0x60d998ae60da8d50
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 169 from 192.168.10.12:1812 to
192.168.200.240:32768 length 0
(0)   EAP-Message = 0x010300061520
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x60d998ae60da8d504c2d509fab15872f
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 170 from 192.168.200.240:32768 to
192.168.10.12:1812 length 369
(1)   User-Name = "anonymous"
(1)   Calling-Station-Id = "a0-88-69-d3-38-a8"
(1)   Called-Station-Id = "00-1c-f9-04-f6-d0:BLUE"
(1)   NAS-Port = 1
(1)   Cisco-AVPair = "audit-session-id=c0a8c8f0000000145d04406e"
(1)   NAS-IP-Address = 192.168.200.240
(1)   NAS-Identifier = "WLC4400"
(1)   Airespace-Wlan-Id = 1
(1)   Service-Type = Framed-User
(1)   Framed-MTU = 1300
(1)   NAS-Port-Type = Wireless-802.11
(1)   EAP-Message =
0x0203009d158000000093160303008e0100008a03035d5208ecfc0a34f713a2d4bc2ae0b652fa3ebecfdd3d031d95b3fe673bbe1e8600002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a01000037000a00080006001d00170018000b000201
(1)   State = 0x60d998ae60da8d504c2d509fab15872f
(1)   Message-Authenticator = 0x7b96289ddf58b6c0a55c01446425ae2a
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/raddb/sites-enabled/default
(1)   authorize {
(1)     policy rewrite_called_station_id {
(1)       if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
{
(1)       if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 -> TRUE
(1)       if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 {
(1)         update request {
(1)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(1)              --> 00-1C-F9-04-F6-D0
(1)           &Called-Station-Id := 00-1C-F9-04-F6-D0
(1)         } # update request = noop
(1)         if ("%{8}") {
(1)         EXPAND %{8}
(1)            --> BLUE
(1)         if ("%{8}")  -> TRUE
(1)         if ("%{8}")  {
(1)           update request {
(1)             EXPAND %{8}
(1)                --> BLUE
(1)             &Called-Station-SSID := BLUE
(1)           } # update request = noop
(1)         } # if ("%{8}")  = noop
(1)         [updated] = updated
(1)       } # if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 = updated
(1)       ... skipping else: Preceding "if" was taken
(1)     } # policy rewrite_called_station_id = updated
(1)     if (&outer.request) {
(1)     if (&outer.request)  -> FALSE
(1)     [preprocess] = ok
(1)     [mschap] = noop
(1)     [digest] = noop
(1) eap: Peer sent EAP Response (code 2) ID 3 length 157
(1) eap: Continuing tunnel setup
(1)     [eap] = ok
(1)   } # authorize = ok
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0x60d998ae60da8d50
(1) eap: Finished EAP session with state 0x60d998ae60da8d50
(1) eap: Previous EAP request found for state 0x60d998ae60da8d50,
released from the list
(1) eap: Peer sent packet with method EAP TTLS (21)
(1) eap: Calling submodule eap_ttls to process data
(1) eap_ttls: Authenticate
(1) eap_ttls: Continuing EAP-TLS
(1) eap_ttls: Peer indicated complete TLS record size will be 147 bytes
(1) eap_ttls: Got complete TLS record (147 bytes)
(1) eap_ttls: [eaptls verify] = length included
(1) eap_ttls: (other): before/accept initialization
(1) eap_ttls: TLS_accept: before/accept initialization
(1) eap_ttls: <<< recv TLS 1.2  [length 008e]
(1) eap_ttls: TLS_accept: SSLv3 read client hello A
(1) eap_ttls: >>> send TLS 1.2  [length 0039]
(1) eap_ttls: TLS_accept: SSLv3 write server hello A
(1) eap_ttls: >>> send TLS 1.2  [length 06f7]
(1) eap_ttls: TLS_accept: SSLv3 write certificate A
(1) eap_ttls: >>> send TLS 1.2  [length 014d]
(1) eap_ttls: TLS_accept: SSLv3 write key exchange A
(1) eap_ttls: >>> send TLS 1.2  [length 0004]
(1) eap_ttls: TLS_accept: SSLv3 write server done A
(1) eap_ttls: TLS_accept: SSLv3 flush data
(1) eap_ttls: TLS_accept: SSLv3 read client certificate A
(1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client
key exchange A
(1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client
key exchange A
(1) eap_ttls: In SSL Handshake Phase
(1) eap_ttls: In SSL Accept mode
(1) eap_ttls: [eaptls process] = handled
(1) eap: Sending EAP Request (code 1) ID 4 length 1014
(1) eap: EAP session adding &reply:State = 0x60d998ae61dd8d50
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 170 from 192.168.10.12:1812 to
192.168.200.240:32768 length 0
(1)   EAP-Message =
0x010403f615c000000895160303003902000035030353689ebb66271af363ee4117713fac6e1dbf788079166eaee75ab49c9fba7e6800c03000000dff01000100000b00040300010216030306f70b0006f30006f00003823082037e30820266a003020102020103300d06092a864886f70d01010b050030
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x60d998ae61dd8d504c2d509fab15872f
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 171 from 192.168.200.240:32768 to
192.168.10.12:1812 length 218
(2)   User-Name = "anonymous"
(2)   Calling-Station-Id = "a0-88-69-d3-38-a8"
(2)   Called-Station-Id = "00-1c-f9-04-f6-d0:BLUE"
(2)   NAS-Port = 1
(2)   Cisco-AVPair = "audit-session-id=c0a8c8f0000000145d04406e"
(2)   NAS-IP-Address = 192.168.200.240
(2)   NAS-Identifier = "WLC4400"
(2)   Airespace-Wlan-Id = 1
(2)   Service-Type = Framed-User
(2)   Framed-MTU = 1300
(2)   NAS-Port-Type = Wireless-802.11
(2)   EAP-Message = 0x020400061500
(2)   State = 0x60d998ae61dd8d504c2d509fab15872f
(2)   Message-Authenticator = 0x3acc438f6bb2a07bd8d7ffe5fdd0c38b
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/raddb/sites-enabled/default
(2)   authorize {
(2)     policy rewrite_called_station_id {
(2)       if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
{
(2)       if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 -> TRUE
(2)       if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 {
(2)         update request {
(2)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(2)              --> 00-1C-F9-04-F6-D0
(2)           &Called-Station-Id := 00-1C-F9-04-F6-D0
(2)         } # update request = noop
(2)         if ("%{8}") {
(2)         EXPAND %{8}
(2)            --> BLUE
(2)         if ("%{8}")  -> TRUE
(2)         if ("%{8}")  {
(2)           update request {
(2)             EXPAND %{8}
(2)                --> BLUE
(2)             &Called-Station-SSID := BLUE
(2)           } # update request = noop
(2)         } # if ("%{8}")  = noop
(2)         [updated] = updated
(2)       } # if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 = updated
(2)       ... skipping else: Preceding "if" was taken
(2)     } # policy rewrite_called_station_id = updated
(2)     if (&outer.request) {
(2)     if (&outer.request)  -> FALSE
(2)     [preprocess] = ok
(2)     [mschap] = noop
(2)     [digest] = noop
(2) eap: Peer sent EAP Response (code 2) ID 4 length 6
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0x60d998ae61dd8d50
(2) eap: Finished EAP session with state 0x60d998ae61dd8d50
(2) eap: Previous EAP request found for state 0x60d998ae61dd8d50,
released from the list
(2) eap: Peer sent packet with method EAP TTLS (21)
(2) eap: Calling submodule eap_ttls to process data
(2) eap_ttls: Authenticate
(2) eap_ttls: Continuing EAP-TLS
(2) eap_ttls: Peer ACKed our handshake fragment
(2) eap_ttls: [eaptls verify] = request
(2) eap_ttls: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 5 length 1014
(2) eap: EAP session adding &reply:State = 0x60d998ae62dc8d50
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 171 from 192.168.10.12:1812 to
192.168.200.240:32768 length 0
(2)   EAP-Message =
0x010503f615c00000089501010b05003046310b3009060355040613024a50310e300c06035504080c05546f6b796f310e300c060355040a0c054d594c41423117301506035504030c0e52414449555320526f6f74204341301e170d3139303730313035323131345a170d3230303633303035323131345a
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x60d998ae62dc8d504c2d509fab15872f
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 172 from 192.168.200.240:32768 to
192.168.10.12:1812 length 218
(3)   User-Name = "anonymous"
(3)   Calling-Station-Id = "a0-88-69-d3-38-a8"
(3)   Called-Station-Id = "00-1c-f9-04-f6-d0:BLUE"
(3)   NAS-Port = 1
(3)   Cisco-AVPair = "audit-session-id=c0a8c8f0000000145d04406e"
(3)   NAS-IP-Address = 192.168.200.240
(3)   NAS-Identifier = "WLC4400"
(3)   Airespace-Wlan-Id = 1
(3)   Service-Type = Framed-User
(3)   Framed-MTU = 1300
(3)   NAS-Port-Type = Wireless-802.11
(3)   EAP-Message = 0x020500061500
(3)   State = 0x60d998ae62dc8d504c2d509fab15872f
(3)   Message-Authenticator = 0x6011673bc47c0a40df27fe7bb656abf6
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/raddb/sites-enabled/default
(3)   authorize {
(3)     policy rewrite_called_station_id {
(3)       if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
{
(3)       if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 -> TRUE
(3)       if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 {
(3)         update request {
(3)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(3)              --> 00-1C-F9-04-F6-D0
(3)           &Called-Station-Id := 00-1C-F9-04-F6-D0
(3)         } # update request = noop
(3)         if ("%{8}") {
(3)         EXPAND %{8}
(3)            --> BLUE
(3)         if ("%{8}")  -> TRUE
(3)         if ("%{8}")  {
(3)           update request {
(3)             EXPAND %{8}
(3)                --> BLUE
(3)             &Called-Station-SSID := BLUE
(3)           } # update request = noop
(3)         } # if ("%{8}")  = noop
(3)         [updated] = updated
(3)       } # if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 = updated
(3)       ... skipping else: Preceding "if" was taken
(3)     } # policy rewrite_called_station_id = updated
(3)     if (&outer.request) {
(3)     if (&outer.request)  -> FALSE
(3)     [preprocess] = ok
(3)     [mschap] = noop
(3)     [digest] = noop
(3) eap: Peer sent EAP Response (code 2) ID 5 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0x60d998ae62dc8d50
(3) eap: Finished EAP session with state 0x60d998ae62dc8d50
(3) eap: Previous EAP request found for state 0x60d998ae62dc8d50,
released from the list
(3) eap: Peer sent packet with method EAP TTLS (21)
(3) eap: Calling submodule eap_ttls to process data
(3) eap_ttls: Authenticate
(3) eap_ttls: Continuing EAP-TLS
(3) eap_ttls: Peer ACKed our handshake fragment
(3) eap_ttls: [eaptls verify] = request
(3) eap_ttls: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 6 length 199
(3) eap: EAP session adding &reply:State = 0x60d998ae63df8d50
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 172 from 192.168.10.12:1812 to
192.168.200.240:32768 length 0
(3)   EAP-Message =
0x010600c715800000089555d1f7b8598604be974aba6c877187f18f911042dc34686b707511c99cf1b76318b640002eebcfa0e72b494adb47e1a619e201cc229166687d090e924523311382fa0f6e855452088553f534a83c9e6a270ec389337f6b744c307910fb8f8a0befc085ca559577ae8e924ef29d
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0x60d998ae63df8d504c2d509fab15872f
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 173 from 192.168.200.240:32768 to
192.168.10.12:1812 length 348
(4)   User-Name = "anonymous"
(4)   Calling-Station-Id = "a0-88-69-d3-38-a8"
(4)   Called-Station-Id = "00-1c-f9-04-f6-d0:BLUE"
(4)   NAS-Port = 1
(4)   Cisco-AVPair = "audit-session-id=c0a8c8f0000000145d04406e"
(4)   NAS-IP-Address = 192.168.200.240
(4)   NAS-Identifier = "WLC4400"
(4)   Airespace-Wlan-Id = 1
(4)   Service-Type = Framed-User
(4)   Framed-MTU = 1300
(4)   NAS-Port-Type = Wireless-802.11
(4)   EAP-Message =
0x0206008815800000007e1603030046100000424104da456efcbdf65f4236983bc96140fd5b5230fd6f5b8a5b63e4a89417196c53101098927ff1db03edf3f035fb374fb8aa7e3f24d1c74e8b7a55966286dd3be89114030300010116030300280000000000000000bc3c36e0ed5587601267d44f4576b8
(4)   State = 0x60d998ae63df8d504c2d509fab15872f
(4)   Message-Authenticator = 0x083d7480c6072e8a6787605aed118b10
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/raddb/sites-enabled/default
(4)   authorize {
(4)     policy rewrite_called_station_id {
(4)       if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
{
(4)       if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 -> TRUE
(4)       if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 {
(4)         update request {
(4)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(4)              --> 00-1C-F9-04-F6-D0
(4)           &Called-Station-Id := 00-1C-F9-04-F6-D0
(4)         } # update request = noop
(4)         if ("%{8}") {
(4)         EXPAND %{8}
(4)            --> BLUE
(4)         if ("%{8}")  -> TRUE
(4)         if ("%{8}")  {
(4)           update request {
(4)             EXPAND %{8}
(4)                --> BLUE
(4)             &Called-Station-SSID := BLUE
(4)           } # update request = noop
(4)         } # if ("%{8}")  = noop
(4)         [updated] = updated
(4)       } # if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 = updated
(4)       ... skipping else: Preceding "if" was taken
(4)     } # policy rewrite_called_station_id = updated
(4)     if (&outer.request) {
(4)     if (&outer.request)  -> FALSE
(4)     [preprocess] = ok
(4)     [mschap] = noop
(4)     [digest] = noop
(4) eap: Peer sent EAP Response (code 2) ID 6 length 136
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0x60d998ae63df8d50
(4) eap: Finished EAP session with state 0x60d998ae63df8d50
(4) eap: Previous EAP request found for state 0x60d998ae63df8d50,
released from the list
(4) eap: Peer sent packet with method EAP TTLS (21)
(4) eap: Calling submodule eap_ttls to process data
(4) eap_ttls: Authenticate
(4) eap_ttls: Continuing EAP-TLS
(4) eap_ttls: Peer indicated complete TLS record size will be 126 bytes
(4) eap_ttls: Got complete TLS record (126 bytes)
(4) eap_ttls: [eaptls verify] = length included
(4) eap_ttls: <<< recv TLS 1.2  [length 0046]
(4) eap_ttls: TLS_accept: SSLv3 read client key exchange A
(4) eap_ttls: TLS_accept: SSLv3 read certificate verify A
(4) eap_ttls: <<< recv TLS 1.2  [length 0001]
(4) eap_ttls: <<< recv TLS 1.2  [length 0010]
(4) eap_ttls: TLS_accept: SSLv3 read finished A
(4) eap_ttls: >>> send TLS 1.2  [length 0001]
(4) eap_ttls: TLS_accept: SSLv3 write change cipher spec A
(4) eap_ttls: >>> send TLS 1.2  [length 0010]
(4) eap_ttls: TLS_accept: SSLv3 write finished A
(4) eap_ttls: TLS_accept: SSLv3 flush data
(4) eap_ttls: (other): SSL negotiation finished successfully
(4) eap_ttls: SSL Connection Established
(4) eap_ttls: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 7 length 61
(4) eap: EAP session adding &reply:State = 0x60d998ae64de8d50
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 173 from 192.168.10.12:1812 to
192.168.200.240:32768 length 0
(4)   EAP-Message =
0x0107003d158000000033140303000101160303002880bd2630b181d4207e40343e1ba49b806407e4e03cc875a9d4d150009d38e2efa2eebbd186025327
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x60d998ae64de8d504c2d509fab15872f
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 174 from 192.168.200.240:32768 to
192.168.10.12:1812 length 271
(5)   User-Name = "anonymous"
(5)   Calling-Station-Id = "a0-88-69-d3-38-a8"
(5)   Called-Station-Id = "00-1c-f9-04-f6-d0:BLUE"
(5)   NAS-Port = 1
(5)   Cisco-AVPair = "audit-session-id=c0a8c8f0000000145d04406e"
(5)   NAS-IP-Address = 192.168.200.240
(5)   NAS-Identifier = "WLC4400"
(5)   Airespace-Wlan-Id = 1
(5)   Service-Type = Framed-User
(5)   Framed-MTU = 1300
(5)   NAS-Port-Type = Wireless-802.11
(5)   EAP-Message =
0x0207003b158000000031170303002c00000000000000019394690141ac0110789d510f1e080247e7f837b859abf1b7dd4ac2be9f95b365a0e935a0
(5)   State = 0x60d998ae64de8d504c2d509fab15872f
(5)   Message-Authenticator = 0x7cf8ae4fcafea86586726dd339976d6a
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/raddb/sites-enabled/default
(5)   authorize {
(5)     policy rewrite_called_station_id {
(5)       if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
{
(5)       if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 -> TRUE
(5)       if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 {
(5)         update request {
(5)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(5)              --> 00-1C-F9-04-F6-D0
(5)           &Called-Station-Id := 00-1C-F9-04-F6-D0
(5)         } # update request = noop
(5)         if ("%{8}") {
(5)         EXPAND %{8}
(5)            --> BLUE
(5)         if ("%{8}")  -> TRUE
(5)         if ("%{8}")  {
(5)           update request {
(5)             EXPAND %{8}
(5)                --> BLUE
(5)             &Called-Station-SSID := BLUE
(5)           } # update request = noop
(5)         } # if ("%{8}")  = noop
(5)         [updated] = updated
(5)       } # if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 = updated
(5)       ... skipping else: Preceding "if" was taken
(5)     } # policy rewrite_called_station_id = updated
(5)     if (&outer.request) {
(5)     if (&outer.request)  -> FALSE
(5)     [preprocess] = ok
(5)     [mschap] = noop
(5)     [digest] = noop
(5) eap: Peer sent EAP Response (code 2) ID 7 length 59
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0x60d998ae64de8d50
(5) eap: Finished EAP session with state 0x60d998ae64de8d50
(5) eap: Previous EAP request found for state 0x60d998ae64de8d50,
released from the list
(5) eap: Peer sent packet with method EAP TTLS (21)
(5) eap: Calling submodule eap_ttls to process data
(5) eap_ttls: Authenticate
(5) eap_ttls: Continuing EAP-TLS
(5) eap_ttls: Peer indicated complete TLS record size will be 49 bytes
(5) eap_ttls: Got complete TLS record (49 bytes)
(5) eap_ttls: [eaptls verify] = length included
(5) eap_ttls: [eaptls process] = ok
(5) eap_ttls: Session established.  Proceeding to decode tunneled attributes
(5) eap_ttls: Got tunneled request
(5) eap_ttls:   EAP-Message = 0x0207000b0179616e616769
(5) eap_ttls:   FreeRADIUS-Proxied-To = 127.0.0.1
(5) eap_ttls: Got tunneled identity of yanagi
(5) eap_ttls: Setting default EAP type for tunneled EAP session
(5) eap_ttls: Sending tunneled request
(5) Virtual server inner-tunnel received request
(5)   EAP-Message = 0x0207000b0179616e616769
(5)   FreeRADIUS-Proxied-To = 127.0.0.1
(5)   User-Name = "yanagi"
(5) server inner-tunnel {
(5)   # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel
(5)     authorize {
(5)       policy rewrite_called_station_id {
(5)         if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
{
(5)         if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 -> FALSE
(5)         else {
(5)           [noop] = noop
(5)         } # else = noop
(5)       } # policy rewrite_called_station_id = noop
(5)       [mschap] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "yanagi", looking up realm NULL
(5) suffix: Found realm "NULL"
(5) suffix: Adding Stripped-User-Name = "yanagi"
(5) suffix: Adding Realm = "NULL"
(5) suffix: Authentication realm is LOCAL
(5)       [suffix] = ok
(5) eap: Peer sent EAP Response (code 2) ID 7 length 11
(5) eap: EAP-Identity reply, returning 'ok' so we can short-circuit
the rest of authorize
(5)       [eap] = ok
(5)     } # authorize = ok
(5)   Found Auth-Type = eap
(5)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(5)     authenticate {
(5) eap: Peer sent packet with method EAP Identity (1)
(5) eap: Calling submodule eap_mschapv2 to process data
(5) eap_mschapv2: Issuing Challenge
(5) eap: Sending EAP Request (code 1) ID 8 length 43
(5) eap: EAP session adding &reply:State = 0x6c5702ca6c5f18b4
(5)       [eap] = handled
(5)     } # authenticate = handled
(5) } # server inner-tunnel
(5) Virtual server sending reply
(5)   EAP-Message =
0x0108002b1a0108002610f6b54d699c36b4a3d29884ab895e35a5667265657261646975732d332e302e3133
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x6c5702ca6c5f18b48c8121cc284df1e5
(5) eap_ttls: Got tunneled Access-Challenge
(5) eap: Sending EAP Request (code 1) ID 8 length 91
(5) eap: EAP session adding &reply:State = 0x60d998ae65d18d50
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 174 from 192.168.10.12:1812 to
192.168.200.240:32768 length 0
(5)   EAP-Message =
0x0108005b158000000051170303004c80bd2630b181d421c415e5422b48f6af7e7e7164b009affc07bcdef70fdcd296bae1762032fdd4beb3d0f906f573c85d85445b411cdbecd4c116bb12c800ae4102cd57434a064848e8334b1a
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x60d998ae65d18d504c2d509fab15872f
(5) Finished request
Waking up in 1.0 seconds.
(6) Received Access-Request Id 175 from 192.168.200.240:32768 to
192.168.10.12:1812 length 327
(6)   User-Name = "anonymous"
(6)   Calling-Station-Id = "a0-88-69-d3-38-a8"
(6)   Called-Station-Id = "00-1c-f9-04-f6-d0:BLUE"
(6)   NAS-Port = 1
(6)   Cisco-AVPair = "audit-session-id=c0a8c8f0000000145d04406e"
(6)   NAS-IP-Address = 192.168.200.240
(6)   NAS-Identifier = "WLC4400"
(6)   Airespace-Wlan-Id = 1
(6)   Service-Type = Framed-User
(6)   Framed-MTU = 1300
(6)   NAS-Port-Type = Wireless-802.11
(6)   EAP-Message =
0x0208007315800000006917030300640000000000000002af2e8a0337c58ffef8802035c1302bf28c20379ded33df720f986787759c6f53419c06152deb397db6b51b3ffb4fd760537c5fdfe9fb7ffd70d7806f417dda9177b4bf5c7e9554308fa6d1054da070e3755c43db709673859e3ff4e9
(6)   State = 0x60d998ae65d18d504c2d509fab15872f
(6)   Message-Authenticator = 0x5d533c0445c6af72308c3cda9c4b634b
(6) session-state: No cached attributes
(6) # Executing section authorize from file /etc/raddb/sites-enabled/default
(6)   authorize {
(6)     policy rewrite_called_station_id {
(6)       if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
{
(6)       if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 -> TRUE
(6)       if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 {
(6)         update request {
(6)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(6)              --> 00-1C-F9-04-F6-D0
(6)           &Called-Station-Id := 00-1C-F9-04-F6-D0
(6)         } # update request = noop
(6)         if ("%{8}") {
(6)         EXPAND %{8}
(6)            --> BLUE
(6)         if ("%{8}")  -> TRUE
(6)         if ("%{8}")  {
(6)           update request {
(6)             EXPAND %{8}
(6)                --> BLUE
(6)             &Called-Station-SSID := BLUE
(6)           } # update request = noop
(6)         } # if ("%{8}")  = noop
(6)         [updated] = updated
(6)       } # if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 = updated
(6)       ... skipping else: Preceding "if" was taken
(6)     } # policy rewrite_called_station_id = updated
(6)     if (&outer.request) {
(6)     if (&outer.request)  -> FALSE
(6)     [preprocess] = ok
(6)     [mschap] = noop
(6)     [digest] = noop
(6) eap: Peer sent EAP Response (code 2) ID 8 length 115
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0x6c5702ca6c5f18b4
(6) eap: Finished EAP session with state 0x60d998ae65d18d50
(6) eap: Previous EAP request found for state 0x60d998ae65d18d50,
released from the list
(6) eap: Peer sent packet with method EAP TTLS (21)
(6) eap: Calling submodule eap_ttls to process data
(6) eap_ttls: Authenticate
(6) eap_ttls: Continuing EAP-TLS
(6) eap_ttls: Peer indicated complete TLS record size will be 105 bytes
(6) eap_ttls: Got complete TLS record (105 bytes)
(6) eap_ttls: [eaptls verify] = length included
(6) eap_ttls: [eaptls process] = ok
(6) eap_ttls: Session established.  Proceeding to decode tunneled attributes
(6) eap_ttls: Got tunneled request
(6) eap_ttls:   EAP-Message =
0x020800411a0208003c3199f20c09e1ee119459edb1b180a8925e0000000000000000158f49fe5fe42871f1e3e1554d355ef1594d39eeff73b6320079616e616769
(6) eap_ttls:   FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_ttls: Sending tunneled request
(6) Virtual server inner-tunnel received request
(6)   EAP-Message =
0x020800411a0208003c3199f20c09e1ee119459edb1b180a8925e0000000000000000158f49fe5fe42871f1e3e1554d355ef1594d39eeff73b6320079616e616769
(6)   FreeRADIUS-Proxied-To = 127.0.0.1
(6)   User-Name = "yanagi"
(6)   State = 0x6c5702ca6c5f18b48c8121cc284df1e5
(6) server inner-tunnel {
(6)   session-state: No cached attributes
(6)   # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel
(6)     authorize {
(6)       policy rewrite_called_station_id {
(6)         if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
{
(6)         if (&Called-Station-Id && (&Called-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
 -> FALSE
(6)         else {
(6)           [noop] = noop
(6)         } # else = noop
(6)       } # policy rewrite_called_station_id = noop
(6)       [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "yanagi", looking up realm NULL
(6) suffix: Found realm "NULL"
(6) suffix: Adding Stripped-User-Name = "yanagi"
(6) suffix: Adding Realm = "NULL"
(6) suffix: Authentication realm is LOCAL
(6)       [suffix] = ok
(6) eap: Peer sent EAP Response (code 2) ID 8 length 65
(6) eap: No EAP Start, assuming it's an on-going EAP conversation
(6)       [eap] = updated
(6)       if (&outer.request:NAS-IP-Address =~
/^192\.168\.10\.1[2]{1}$/ || &outer.request:NAS-IP-Address ==
"192.168.200.240" || &outer.request:NAS-IP-Address == "localhost") {
(6)       if (&outer.request:NAS-IP-Address =~
/^192\.168\.10\.1[2]{1}$/ || &outer.request:NAS-IP-Address ==
"192.168.200.240" || &outer.request:NAS-IP-Address == "localhost")  ->
TRUE
(6)       if (&outer.request:NAS-IP-Address =~
/^192\.168\.10\.1[2]{1}$/ || &outer.request:NAS-IP-Address ==
"192.168.200.240" || &outer.request:NAS-IP-Address == "localhost")  {
(6)         if (&outer.request:Called-Station-SSID == 'BLUE')  {
(6)         if (&outer.request:Called-Station-SSID == 'BLUE')   -> TRUE
(6)         if (&outer.request:Called-Station-SSID == 'BLUE')   {
rlm_ldap (ldap_regularusers): Closing connection (0): Hit
idle_timeout, was idle for 294 seconds
rlm_ldap (ldap_regularusers): You probably need to lower "min"
rlm_ldap (ldap_regularusers): Closing connection (1): Hit
idle_timeout, was idle for 294 seconds
rlm_ldap (ldap_regularusers): You probably need to lower "min"
rlm_ldap (ldap_regularusers): Closing connection (2): Hit
idle_timeout, was idle for 294 seconds
rlm_ldap (ldap_regularusers): You probably need to lower "min"
rlm_ldap (ldap_regularusers): Closing connection (3): Hit
idle_timeout, was idle for 293 seconds
rlm_ldap (ldap_regularusers): You probably need to lower "min"
rlm_ldap (ldap_regularusers): Closing connection (4): Hit
idle_timeout, was idle for 293 seconds
rlm_ldap (ldap_regularusers): You probably need to lower "min"
rlm_ldap (ldap_regularusers): 0 of 0 connections in use.  You  may
need to increase "spare"
rlm_ldap (ldap_regularusers): Opening additional connection (5), 1 of
10 pending slots used
rlm_ldap (ldap_regularusers): Connecting to ldap://tyg-ldap-01:636
rlm_ldap (ldap_regularusers): Waiting for bind result...
rlm_ldap (ldap_regularusers): Bind successful
rlm_ldap (ldap_regularusers): Reserved connection (5)
(6) ldap_regularusers: EXPAND
(&(!(employeeType=participant))(!(employeeType=trainee))(!(hogePersonAccountStatus=03))(!(hogePersonAccountStatus=04))(uid=%{%{Stripped-User-Name}:-%{User-Name}}))
(6) ldap_regularusers:    -->
(&(!(employeeType=participant))(!(employeeType=trainee))(!(hogePersonAccountStatus=03))(!(hogePersonAccountStatus=04))(uid=yanagi))
(6) ldap_regularusers: Performing search in
"ou=Users,dc=edu,dc=hoge,dc=ac,dc=jp" with filter
"(&(!(employeeType=participant))(!(employeeType=trainee))(!(hogePersonAccountStatus=03))(!(hogePersonAccountStatus=04))(uid=yanagi))",
scope "sub"
(6) ldap_regularusers: Waiting for search result...
(6) ldap_regularusers: User object found at DN
"uid=yanagi,ou=Users,dc=edu,dc=hoge,dc=ac,dc=jp"
(6) ldap_regularusers: Processing user attributes
(6) ldap_regularusers: control:NT-Password :=
0x4243353030433041363439353842434531393638383936303344464645343530
(6) ldap_regularusers: control:Password-With-Header :=
'{SSHA256}Q1iLz8Pc/mkXU/hniRsu3/rpWKOVdjAU/4t2iLynZqdIPFIYPW0elA=='
rlm_ldap (ldap_regularusers): Released connection (5)
Need 4 more connections to reach min connections (5)
rlm_ldap (ldap_regularusers): Opening additional connection (6), 1 of
9 pending slots used
rlm_ldap (ldap_regularusers): Connecting to ldap://tyg-ldap-01:636
rlm_ldap (ldap_regularusers): Waiting for bind result...
rlm_ldap (ldap_regularusers): Bind successful
(6)           [ldap_regularusers] = updated
(6)           update control {
(6)             &Auth-Type := LDAP
(6)           } # update control = noop
(6)         } # if (&outer.request:Called-Station-SSID == 'BLUE')   = updated
(6)       } # if (&outer.request:NAS-IP-Address =~
/^192\.168\.10\.1[2]{1}$/ || &outer.request:NAS-IP-Address ==
"192.168.200.240" || &outer.request:NAS-IP-Address == "localhost")  =
updated
(6)       [expiration] = noop
(6)       [logintime] = noop
(6)     } # authorize = updated
(6)   Found Auth-Type = LDAP
(6)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(6)     Auth-Type LDAP {
(6)       if (&outer.request:NAS-IP-Address =~
/^192\.168\.10\.1[2]{1}$/ || &outer.request:NAS-IP-Address ==
"192.168.200.240" || &outer.request:NAS-IP-Address == "localhost") {
(6)       if (&outer.request:NAS-IP-Address =~
/^192\.168\.10\.1[2]{1}$/ || &outer.request:NAS-IP-Address ==
"192.168.200.240" || &outer.request:NAS-IP-Address == "localhost")  ->
TRUE
(6)       if (&outer.request:NAS-IP-Address =~
/^192\.168\.10\.1[2]{1}$/ || &outer.request:NAS-IP-Address ==
"192.168.200.240" || &outer.request:NAS-IP-Address == "localhost")  {
(6)         if (&outer.request:Called-Station-SSID == 'BLUE') {
(6)         if (&outer.request:Called-Station-SSID == 'BLUE')  -> TRUE
(6)         if (&outer.request:Called-Station-SSID == 'BLUE')  {
(6) ldap_regularusers: WARNING: You have set "Auth-Type := LDAP" somewhere
(6) ldap_regularusers: WARNING: *********************************************
(6) ldap_regularusers: WARNING: * THAT CONFIGURATION IS WRONG.  DELETE IT.
(6) ldap_regularusers: WARNING: * YOU ARE PREVENTING THE SERVER FROM WORKING
(6) ldap_regularusers: WARNING: *********************************************
(6) ldap_regularusers: ERROR: Attribute "User-Password" is required
for authentication
(6)           [ldap_regularusers] = invalid
(6)         } # if (&outer.request:Called-Station-SSID == 'BLUE')  = invalid
(6)       } # if (&outer.request:NAS-IP-Address =~
/^192\.168\.10\.1[2]{1}$/ || &outer.request:NAS-IP-Address ==
"192.168.200.240" || &outer.request:NAS-IP-Address == "localhost")  =
invalid
(6)     } # Auth-Type LDAP = invalid
(6)   Failed to authenticate the user
(6)   Login incorrect (ldap_regularusers: Attribute "User-Password" is
required for authentication): [yanagi/<via Auth-Type = LDAP>] (from
client n-test port 0 via TLS tunnel)
(6)   Using Post-Auth-Type Reject
(6)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(6)     Post-Auth-Type REJECT {
(6) attr_filter.access_reject: EXPAND %{User-Name}
(6) attr_filter.access_reject:    --> yanagi
(6) attr_filter.access_reject: Matched entry DEFAULT at line 11
(6)       [attr_filter.access_reject] = updated
(6)       update outer.session-state {
(6)         &Module-Failure-Message := &request:Module-Failure-Message
-> 'ldap_regularusers: Attribute "User-Password" is required for
authentication'
(6)       } # update outer.session-state = noop
(6)     } # Post-Auth-Type REJECT = updated
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6) eap_ttls: Got tunneled Access-Reject
(6) eap: ERROR: Failed continuing EAP TTLS (21) session.  EAP sub-module failed
(6) eap: Sending EAP Failure (code 4) ID 8 length 4
(6) eap: Failed in EAP select
(6)     [eap] = invalid
(6)   } # authenticate = invalid
(6) Failed to authenticate the user
(6) Login incorrect (eap: Failed continuing EAP TTLS (21) session.
EAP sub-module failed): [anonymous/<via Auth-Type = eap>] (from client
n-test port 1 cli a0-88-69-d3-38-a8)
(6) Using Post-Auth-Type Reject
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6)   Post-Auth-Type REJECT {
(6) attr_filter.access_reject: EXPAND %{User-Name}
(6) attr_filter.access_reject:    --> anonymous
(6) attr_filter.access_reject: Matched entry DEFAULT at line 11
(6)     [attr_filter.access_reject] = updated
(6)   } # Post-Auth-Type REJECT = updated
(6) Delaying response for 1.000000 seconds
Waking up in 0.1 seconds.
Waking up in 0.7 seconds.
(0) Cleaning up request packet ID 169 with timestamp +289
(1) Cleaning up request packet ID 170 with timestamp +289
(2) Cleaning up request packet ID 171 with timestamp +289
(3) Cleaning up request packet ID 172 with timestamp +289
(4) Cleaning up request packet ID 173 with timestamp +289
Waking up in 0.1 seconds.
(6) Sending delayed response
(6) Sent Access-Reject Id 175 from 192.168.10.12:1812 to
192.168.200.240:32768 length 44
(6)   EAP-Message = 0x04080004
(6)   Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.8 seconds.
(5) Cleaning up request packet ID 174 with timestamp +293
Waking up in 0.1 seconds.
(6) Cleaning up request packet ID 175 with timestamp +293
Ready to process requests

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
| Threaded
Open this post in threaded view
|

Re: Cannot connect with EAP-TTLS + MS-CHAPv2. if you'd kindly teach me.

Alan DeKok-2
On Aug 12, 2019, at 9:31 PM, Yuya Yanagi <[hidden email]> wrote:
> We are replacing from freeradius v2 to freeradius v3, the settings
> will take over the previous contents, and the Wifi authentication
> method will not change from EAP-TTLS + MS-CHAPv2
> It is a specification and customer request.

  OK.

> In freeradius v2 environment, you can connect with EAP-TTLS +
> MS-CHAPv2. In Freeradius v3, you can connect with EAP-TTLS + PAP, but
> you cannot connect with MS-CHAPv2.

  It should be possible with mostly the same configuration.

> There is no AD in this environment, everything is done with LDAP, and
> the password is stored in LDAP with NT Hash. Mapping has the following
> two mappings. (LDAP is OpenLDAP use )
>
> control:NT-Password         :=      'sambaNtPassword'
> control:User-Password         :=      'sambaNtPassword'

  Are those attributes found in LDAP?

> In the authentication section I am trying to reference LDAP with Auth-Type LDAP
> The following error occurs and there is no inquiry.
>
> (6) ldap_regularusers: WARNING: You have set "Auth-Type := LDAP" somewhere
> (6) ldap_regularusers: WARNING: *********************************************
> (6) ldap_regularusers: WARNING: * THAT CONFIGURATION IS WRONG.  DELETE IT.
> (6) ldap_regularusers: WARNING: * YOU ARE PREVENTING THE SERVER FROM WORKING
> (6) ldap_regularusers: WARNING: *********************************************
> (6) ldap_regularusers: ERROR: Attribute "User-Password" is required
> for authentication

  That seems pretty clear.  Don't set "Auth-Type := LDAP".  It's not needed.

> (6) server inner-tunnel {
> (6)   session-state: No cached attributes
> (6)   # Executing section authorize from file
> /etc/raddb/sites-enabled/inner-tunnel
> (6)     authorize {
> (6)       policy rewrite_called_station_id {
> (6)         if (&Called-Station-Id && (&Called-Station-Id =~
> /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
> {
> (6)         if (&Called-Station-Id && (&Called-Station-Id =~
> /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
> -> FALSE
> (6)         else {
> (6)           [noop] = noop
> (6)         } # else = noop
> (6)       } # policy rewrite_called_station_id = noop
> (6)       [mschap] = noop
> (6) suffix: Checking for suffix after "@"
> (6) suffix: No '@' in User-Name = "yanagi", looking up realm NULL
> (6) suffix: Found realm "NULL"
> (6) suffix: Adding Stripped-User-Name = "yanagi"
> (6) suffix: Adding Realm = "NULL"
> (6) suffix: Authentication realm is LOCAL
> (6)       [suffix] = ok
> (6) eap: Peer sent EAP Response (code 2) ID 8 length 65
> (6) eap: No EAP Start, assuming it's an on-going EAP conversation
> (6)       [eap] = updated
> (6)       if (&outer.request:NAS-IP-Address =~
> /^192\.168\.10\.1[2]{1}$/ || &outer.request:NAS-IP-Address ==
> "192.168.200.240" || &outer.request:NAS-IP-Address == "localhost") {
> (6)       if (&outer.request:NAS-IP-Address =~
> /^192\.168\.10\.1[2]{1}$/ || &outer.request:NAS-IP-Address ==
> "192.168.200.240" || &outer.request:NAS-IP-Address == "localhost")  ->
> TRUE
> (6)       if (&outer.request:NAS-IP-Address =~
> /^192\.168\.10\.1[2]{1}$/ || &outer.request:NAS-IP-Address ==
> "192.168.200.240" || &outer.request:NAS-IP-Address == "localhost")  {
> (6)         if (&outer.request:Called-Station-SSID == 'BLUE')  {
> (6)         if (&outer.request:Called-Station-SSID == 'BLUE')   -> TRUE
> (6)         if (&outer.request:Called-Station-SSID == 'BLUE')   {
> rlm_ldap (ldap_regularusers): Closing connection (0): Hit
> idle_timeout, was idle for 294 seconds
> rlm_ldap (ldap_regularusers): You probably need to lower "min"
> rlm_ldap (ldap_regularusers): Closing connection (1): Hit
> idle_timeout, was idle for 294 seconds
> rlm_ldap (ldap_regularusers): You probably need to lower "min"
> rlm_ldap (ldap_regularusers): Closing connection (2): Hit
> idle_timeout, was idle for 294 seconds
> rlm_ldap (ldap_regularusers): You probably need to lower "min"
> rlm_ldap (ldap_regularusers): Closing connection (3): Hit
> idle_timeout, was idle for 293 seconds
> rlm_ldap (ldap_regularusers): You probably need to lower "min"
> rlm_ldap (ldap_regularusers): Closing connection (4): Hit
> idle_timeout, was idle for 293 seconds
> rlm_ldap (ldap_regularusers): You probably need to lower "min"
> rlm_ldap (ldap_regularusers): 0 of 0 connections in use.  You  may
> need to increase "spare"
> rlm_ldap (ldap_regularusers): Opening additional connection (5), 1 of
> 10 pending slots used
> rlm_ldap (ldap_regularusers): Connecting to ldap://tyg-ldap-01:636
> rlm_ldap (ldap_regularusers): Waiting for bind result...
> rlm_ldap (ldap_regularusers): Bind successful
> rlm_ldap (ldap_regularusers): Reserved connection (5)
> (6) ldap_regularusers: EXPAND
> (&(!(employeeType=participant))(!(employeeType=trainee))(!(hogePersonAccountStatus=03))(!(hogePersonAccountStatus=04))(uid=%{%{Stripped-User-Name}:-%{User-Name}}))
> (6) ldap_regularusers:    -->
> (&(!(employeeType=participant))(!(employeeType=trainee))(!(hogePersonAccountStatus=03))(!(hogePersonAccountStatus=04))(uid=yanagi))
> (6) ldap_regularusers: Performing search in
> "ou=Users,dc=edu,dc=hoge,dc=ac,dc=jp" with filter
> "(&(!(employeeType=participant))(!(employeeType=trainee))(!(hogePersonAccountStatus=03))(!(hogePersonAccountStatus=04))(uid=yanagi))",
> scope "sub"
> (6) ldap_regularusers: Waiting for search result...
> (6) ldap_regularusers: User object found at DN
> "uid=yanagi,ou=Users,dc=edu,dc=hoge,dc=ac,dc=jp"
> (6) ldap_regularusers: Processing user attributes
> (6) ldap_regularusers: control:NT-Password :=
> 0x4243353030433041363439353842434531393638383936303344464645343530

  That's the NT password.  If you just leave things alone, it will work.

> (6) ldap_regularusers: control:Password-With-Header :=
> '{SSHA256}Q1iLz8Pc/mkXU/hniRsu3/rpWKOVdjAU/4t2iLynZqdIPFIYPW0elA=='
> rlm_ldap (ldap_regularusers): Released connection (5)
> Need 4 more connections to reach min connections (5)
> rlm_ldap (ldap_regularusers): Opening additional connection (6), 1 of
> 9 pending slots used
> rlm_ldap (ldap_regularusers): Connecting to ldap://tyg-ldap-01:636
> rlm_ldap (ldap_regularusers): Waiting for bind result...
> rlm_ldap (ldap_regularusers): Bind successful
> (6)           [ldap_regularusers] = updated
> (6)           update control {
> (6)             &Auth-Type := LDAP
> (6)           } # update control = noop

  Don't do that.  It's breaking the server.

  Delete those lines from your configuration.  The user should then be able to authenticate.

  Alan DeKok.


-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
| Threaded
Open this post in threaded view
|

Re: Cannot connect with EAP-TTLS + MS-CHAPv2. if you'd kindly teach me.

Yuya Yanagi
Hi Alan.

thank you for answering!

>> There is no AD in this environment, everything is done with LDAP, and
>> the password is stored in LDAP with NT Hash. Mapping has the following
>> two mappings. (LDAP is OpenLDAP use )
>>
>> control:NT-Password         :=      'sambaNtPassword'
>> control:User-Password         :=      'sambaNtPassword'

 > Are those attributes found in LDAP?

sambaNtPassword has an attribute in LDAP

>> In the authentication section I am trying to reference LDAP with Auth-Type LDAP
>> The following error occurs and there is no inquiry.
>>
>> (6) ldap_regularusers: WARNING: You have set "Auth-Type := LDAP" somewhere
>> (6) ldap_regularusers: WARNING: *********************************************
>> (6) ldap_regularusers: WARNING: * THAT CONFIGURATION IS WRONG.  DELETE IT.
>> (6) ldap_regularusers: WARNING: * YOU ARE PREVENTING THE SERVER FROM WORKING
>> (6) ldap_regularusers: WARNING: *********************************************
>> (6) ldap_regularusers: ERROR: Attribute "User-Password" is required
>> for authentication

 >That seems pretty clear.  Don't set "Auth-Type := LDAP".  It's not needed.

Does that mean commenting out the Auth-Type LDAP part of the
authentication section?

2019年8月13日(火) 11:16 Alan DeKok <[hidden email]>:

>
> On Aug 12, 2019, at 9:31 PM, Yuya Yanagi <[hidden email]> wrote:
> > We are replacing from freeradius v2 to freeradius v3, the settings
> > will take over the previous contents, and the Wifi authentication
> > method will not change from EAP-TTLS + MS-CHAPv2
> > It is a specification and customer request.
>
>   OK.
>
> > In freeradius v2 environment, you can connect with EAP-TTLS +
> > MS-CHAPv2. In Freeradius v3, you can connect with EAP-TTLS + PAP, but
> > you cannot connect with MS-CHAPv2.
>
>   It should be possible with mostly the same configuration.
>
> > There is no AD in this environment, everything is done with LDAP, and
> > the password is stored in LDAP with NT Hash. Mapping has the following
> > two mappings. (LDAP is OpenLDAP use )
> >
> > control:NT-Password         :=      'sambaNtPassword'
> > control:User-Password         :=      'sambaNtPassword'
>
>   Are those attributes found in LDAP?
>
> > In the authentication section I am trying to reference LDAP with Auth-Type LDAP
> > The following error occurs and there is no inquiry.
> >
> > (6) ldap_regularusers: WARNING: You have set "Auth-Type := LDAP" somewhere
> > (6) ldap_regularusers: WARNING: *********************************************
> > (6) ldap_regularusers: WARNING: * THAT CONFIGURATION IS WRONG.  DELETE IT.
> > (6) ldap_regularusers: WARNING: * YOU ARE PREVENTING THE SERVER FROM WORKING
> > (6) ldap_regularusers: WARNING: *********************************************
> > (6) ldap_regularusers: ERROR: Attribute "User-Password" is required
> > for authentication
>
>   That seems pretty clear.  Don't set "Auth-Type := LDAP".  It's not needed.
>
> > (6) server inner-tunnel {
> > (6)   session-state: No cached attributes
> > (6)   # Executing section authorize from file
> > /etc/raddb/sites-enabled/inner-tunnel
> > (6)     authorize {
> > (6)       policy rewrite_called_station_id {
> > (6)         if (&Called-Station-Id && (&Called-Station-Id =~
> > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
> > {
> > (6)         if (&Called-Station-Id && (&Called-Station-Id =~
> > /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))
> > -> FALSE
> > (6)         else {
> > (6)           [noop] = noop
> > (6)         } # else = noop
> > (6)       } # policy rewrite_called_station_id = noop
> > (6)       [mschap] = noop
> > (6) suffix: Checking for suffix after "@"
> > (6) suffix: No '@' in User-Name = "yanagi", looking up realm NULL
> > (6) suffix: Found realm "NULL"
> > (6) suffix: Adding Stripped-User-Name = "yanagi"
> > (6) suffix: Adding Realm = "NULL"
> > (6) suffix: Authentication realm is LOCAL
> > (6)       [suffix] = ok
> > (6) eap: Peer sent EAP Response (code 2) ID 8 length 65
> > (6) eap: No EAP Start, assuming it's an on-going EAP conversation
> > (6)       [eap] = updated
> > (6)       if (&outer.request:NAS-IP-Address =~
> > /^192\.168\.10\.1[2]{1}$/ || &outer.request:NAS-IP-Address ==
> > "192.168.200.240" || &outer.request:NAS-IP-Address == "localhost") {
> > (6)       if (&outer.request:NAS-IP-Address =~
> > /^192\.168\.10\.1[2]{1}$/ || &outer.request:NAS-IP-Address ==
> > "192.168.200.240" || &outer.request:NAS-IP-Address == "localhost")  ->
> > TRUE
> > (6)       if (&outer.request:NAS-IP-Address =~
> > /^192\.168\.10\.1[2]{1}$/ || &outer.request:NAS-IP-Address ==
> > "192.168.200.240" || &outer.request:NAS-IP-Address == "localhost")  {
> > (6)         if (&outer.request:Called-Station-SSID == 'BLUE')  {
> > (6)         if (&outer.request:Called-Station-SSID == 'BLUE')   -> TRUE
> > (6)         if (&outer.request:Called-Station-SSID == 'BLUE')   {
> > rlm_ldap (ldap_regularusers): Closing connection (0): Hit
> > idle_timeout, was idle for 294 seconds
> > rlm_ldap (ldap_regularusers): You probably need to lower "min"
> > rlm_ldap (ldap_regularusers): Closing connection (1): Hit
> > idle_timeout, was idle for 294 seconds
> > rlm_ldap (ldap_regularusers): You probably need to lower "min"
> > rlm_ldap (ldap_regularusers): Closing connection (2): Hit
> > idle_timeout, was idle for 294 seconds
> > rlm_ldap (ldap_regularusers): You probably need to lower "min"
> > rlm_ldap (ldap_regularusers): Closing connection (3): Hit
> > idle_timeout, was idle for 293 seconds
> > rlm_ldap (ldap_regularusers): You probably need to lower "min"
> > rlm_ldap (ldap_regularusers): Closing connection (4): Hit
> > idle_timeout, was idle for 293 seconds
> > rlm_ldap (ldap_regularusers): You probably need to lower "min"
> > rlm_ldap (ldap_regularusers): 0 of 0 connections in use.  You  may
> > need to increase "spare"
> > rlm_ldap (ldap_regularusers): Opening additional connection (5), 1 of
> > 10 pending slots used
> > rlm_ldap (ldap_regularusers): Connecting to ldap://tyg-ldap-01:636
> > rlm_ldap (ldap_regularusers): Waiting for bind result...
> > rlm_ldap (ldap_regularusers): Bind successful
> > rlm_ldap (ldap_regularusers): Reserved connection (5)
> > (6) ldap_regularusers: EXPAND
> > (&(!(employeeType=participant))(!(employeeType=trainee))(!(hogePersonAccountStatus=03))(!(hogePersonAccountStatus=04))(uid=%{%{Stripped-User-Name}:-%{User-Name}}))
> > (6) ldap_regularusers:    -->
> > (&(!(employeeType=participant))(!(employeeType=trainee))(!(hogePersonAccountStatus=03))(!(hogePersonAccountStatus=04))(uid=yanagi))
> > (6) ldap_regularusers: Performing search in
> > "ou=Users,dc=edu,dc=hoge,dc=ac,dc=jp" with filter
> > "(&(!(employeeType=participant))(!(employeeType=trainee))(!(hogePersonAccountStatus=03))(!(hogePersonAccountStatus=04))(uid=yanagi))",
> > scope "sub"
> > (6) ldap_regularusers: Waiting for search result...
> > (6) ldap_regularusers: User object found at DN
> > "uid=yanagi,ou=Users,dc=edu,dc=hoge,dc=ac,dc=jp"
> > (6) ldap_regularusers: Processing user attributes
> > (6) ldap_regularusers: control:NT-Password :=
> > 0x4243353030433041363439353842434531393638383936303344464645343530
>
>   That's the NT password.  If you just leave things alone, it will work.
>
> > (6) ldap_regularusers: control:Password-With-Header :=
> > '{SSHA256}Q1iLz8Pc/mkXU/hniRsu3/rpWKOVdjAU/4t2iLynZqdIPFIYPW0elA=='
> > rlm_ldap (ldap_regularusers): Released connection (5)
> > Need 4 more connections to reach min connections (5)
> > rlm_ldap (ldap_regularusers): Opening additional connection (6), 1 of
> > 9 pending slots used
> > rlm_ldap (ldap_regularusers): Connecting to ldap://tyg-ldap-01:636
> > rlm_ldap (ldap_regularusers): Waiting for bind result...
> > rlm_ldap (ldap_regularusers): Bind successful
> > (6)           [ldap_regularusers] = updated
> > (6)           update control {
> > (6)             &Auth-Type := LDAP
> > (6)           } # update control = noop
>
>   Don't do that.  It's breaking the server.
>
>   Delete those lines from your configuration.  The user should then be able to authenticate.
>
>   Alan DeKok.
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
| Threaded
Open this post in threaded view
|

Re: Cannot connect with EAP-TTLS + MS-CHAPv2. if you'd kindly teach me.

Alan DeKok-2
On Aug 12, 2019, at 10:25 PM, Yuya Yanagi <[hidden email]> wrote:
>
>> That seems pretty clear.  Don't set "Auth-Type := LDAP".  It's not needed.
>
> Does that mean commenting out the Auth-Type LDAP part of the
> authentication section?

  No.

  Read my message.  I said to DELETE the section that did:

        update control {
                Auth-Type := LDAP
        }

  Read this:

>>> (6)           update control {
>>> (6)             &Auth-Type := LDAP
>>> (6)           } # update control = noop
>>
>>  Don't do that.  It's breaking the server.
>>
>>  Delete those lines from your configuration.  The user should then be able to authenticate.

  DELETE that section.  Don't delete ANOTHER section.

  Alan DeKok.


-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
| Threaded
Open this post in threaded view
|

Re: Cannot connect with EAP-TTLS + MS-CHAPv2. if you'd kindly teach me.

Yuya Yanagi
Hi Alan

I understood the pointed out contents and deleted . I'm sorry for bothering you.
When you run it again, you will be told that there is no NT / LM
password. Where should I look next?

---------
lm_ldap (ldap_regularusers): Reserved connection (0)
(6) ldap_regularusers: EXPAND
(&(!(employeeType=participant))(!(employeeType=trainee))(!(tutPersonAccountStatus=03))(!(tutPersonAccountStatus=04))(uid=%{%{Stripped-User-Name}:-%{User-Name}}))
(6) ldap_regularusers:    -->
(&(!(employeeType=participant))(!(employeeType=trainee))(!(tutPersonAccountStatus=03))(!(tutPersonAccountStatus=04))(uid=yanagi))
(6) ldap_regularusers: Performing search in
"ou=Users,dc=edu,dc=tut,dc=ac,dc=jp" with filter
"(&(!(employeeType=participant))(!(employeeType=trainee))(!(tutPersonAccountStatus=03))(!(tutPersonAccountStatus=04))(uid=yanagi))",
scope "sub"
(6) ldap_regularusers: Waiting for search result...
(6) ldap_regularusers: User object found at DN
"uid=yanagi,ou=Users,dc=edu,dc=tut,dc=ac,dc=jp"
(6) ldap_regularusers: Processing user attributes
(6) ldap_regularusers: control:NT-Password :=
0x4243353030433041363439353842434531393638383936303344464645343530
(6) ldap_regularusers: control:User-Password :=
'BC500C0A64958BCE196889603DFFE450'
(6) ldap_regularusers: control:Password-With-Header :=
'{SSHA256}Q1iLz8Pc/mkXU/hniRsu3/rpWKOVdjAU/4t2iLynZqdIPFIYPW0elA=='
rlm_ldap (ldap_regularusers): Released connection (0)
(6)           [ldap_regularusers] = updated
(6)         } # if (&outer.request:Called-Station-SSID == 'BLUE')   = updated
(6)       } # if (&outer.request:NAS-IP-Address =~
/^192\.168\.10\.1[2]{1}$/ || &outer.request:NAS-IP-Address ==
"192.168.200.240" || &outer.request:NAS-IP-Address == "localhost")  =
updated
(6)       [expiration] = noop
(6)       [logintime] = noop
(6)     } # authorize = updated
(6)   Found Auth-Type = eap
(6)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(6)     authenticate {
(6) eap: Expiring EAP session with state 0x826df85d8265e230
(6) eap: Finished EAP session with state 0x826df85d8265e230
(6) eap: Previous EAP request found for state 0x826df85d8265e230,
released from the list
(6) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(6) eap: Calling submodule eap_mschapv2 to process data
(6) eap_mschapv2: # Executing group from file
/etc/raddb/sites-enabled/inner-tunnel
(6) eap_mschapv2:   authenticate {
(6) mschap: WARNING: NT-Password has not been normalized by the 'pap'
module (likely still in hex format).  Authentication may fail
(6) mschap: WARNING: No Cleartext-Password configured.  Cannot create
NT-Password
(6) mschap: WARNING: No Cleartext-Password configured.  Cannot create
LM-Password
(6) mschap: Creating challenge hash with username: yanagi
(6) mschap: Client is using MS-CHAPv2
(6) mschap: ERROR: FAILED: No NT/LM-Password.  Cannot perform authentication
(6) mschap: ERROR: MS-CHAP2-Response is incorrect
(6)     [mschap] = reject
(6)   } # authenticate = reject
(6) eap: Sending EAP Failure (code 4) ID 8 length 4
(6) eap: Freeing handler
(6)       [eap] = reject
(6)     } # authenticate = reject
(6)   Failed to authenticate the user
(6)   Login incorrect (mschap: FAILED: No NT/LM-Password.  Cannot
perform authentication): [yanagi/<via Auth-Type = eap>] (from client
n-test port 0 via TLS tunnel)
(6)   Using Post-Auth-Type Reject
(6)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(6)     Post-Auth-Type REJECT {
(6) attr_filter.access_reject: EXPAND %{User-Name}
(6) attr_filter.access_reject:    --> yanagi
(6) attr_filter.access_reject: Matched entry DEFAULT at line 11
(6)       [attr_filter.access_reject] = updated
(6)       update outer.session-state {
(6)         &Module-Failure-Message := &request:Module-Failure-Message
-> 'mschap: FAILED: No NT/LM-Password.  Cannot perform authentication'
(6)       } # update outer.session-state = noop
(6)     } # Post-Auth-Type REJECT = updated
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6)   MS-CHAP-Error = "\010E=691 R=1
C=0d87b3e853acf17d17b03a4b37641556 V=3 M=Authentication failed"
(6)   EAP-Message = 0x04080004
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_ttls: Got tunneled Access-Reject
(6) eap: ERROR: Failed continuing EAP TTLS (21) session.  EAP sub-module failed
(6) eap: Sending EAP Failure (code 4) ID 8 length 4

2019年8月13日(火) 11:31 Alan DeKok <[hidden email]>:

>
> On Aug 12, 2019, at 10:25 PM, Yuya Yanagi <[hidden email]> wrote:
> >
> >> That seems pretty clear.  Don't set "Auth-Type := LDAP".  It's not needed.
> >
> > Does that mean commenting out the Auth-Type LDAP part of the
> > authentication section?
>
>   No.
>
>   Read my message.  I said to DELETE the section that did:
>
>         update control {
>                 Auth-Type := LDAP
>         }
>
>   Read this:
>
> >>> (6)           update control {
> >>> (6)             &Auth-Type := LDAP
> >>> (6)           } # update control = noop
> >>
> >>  Don't do that.  It's breaking the server.
> >>
> >>  Delete those lines from your configuration.  The user should then be able to authenticate.
>
>   DELETE that section.  Don't delete ANOTHER section.
>
>   Alan DeKok.
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
| Threaded
Open this post in threaded view
|

Re: Cannot connect with EAP-TTLS + MS-CHAPv2. if you'd kindly teach me.

Alan DeKok-2
On Aug 12, 2019, at 10:43 PM, Yuya Yanagi <[hidden email]> wrote:
>
> I understood the pointed out contents and deleted . I'm sorry for bothering you.
> When you run it again, you will be told that there is no NT / LM
> password. Where should I look next?

  You edited the default configuration and broke it.  Don't do that.

  You have a very complex configuration.  You've clearly built it without doing much in the way of testing.  That's wrong.

> (6) ldap_regularusers: control:NT-Password :=
> 0x4243353030433041363439353842434531393638383936303344464645343530

  As I said earlier, that *is* the NT password.

> (6) ldap_regularusers: control:User-Password :=
> 'BC500C0A64958BCE196889603DFFE450'
> (6) ldap_regularusers: control:Password-With-Header :=
> '{SSHA256}Q1iLz8Pc/mkXU/hniRsu3/rpWKOVdjAU/4t2iLynZqdIPFIYPW0elA=='
> rlm_ldap (ldap_regularusers): Released connection (0)
> (6)           [ldap_regularusers] = updated
> (6)         } # if (&outer.request:Called-Station-SSID == 'BLUE')   = updated
> (6)       } # if (&outer.request:NAS-IP-Address =~
> /^192\.168\.10\.1[2]{1}$/ || &outer.request:NAS-IP-Address ==
> "192.168.200.240" || &outer.request:NAS-IP-Address == "localhost")  =
> updated
> (6)       [expiration] = noop
> (6)       [logintime] = noop
> (6)     } # authorize = updated

  Note that there is no "pap" module.  The "pap" module is used in the default configuration.  It is placed last in the "authorize" section so that it can "fix" the various passwords.

  Put the "pap" module back, as the last entry in the "authorize" section.

> (6) mschap: WARNING: NT-Password has not been normalized by the 'pap'
> module (likely still in hex format).  Authentication may fail

  Again, that is pretty clear.  The "pap" module should be fixing the NT-Password.  Since you *deleted* the PAP module, it is NOT fixing the NT-Password.

  The solution is to NOT delete the "pap" module.

  It's hard to make these error messages any easier to understand.

  Alan DeKok.


-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
| Threaded
Open this post in threaded view
|

Re: Cannot connect with EAP-TTLS + MS-CHAPv2. if you'd kindly teach me.

Yuya Yanagi
Hi Alan

After correcting as pointed out, it worked. Thank you very much!

The problem is why you need the authentication section of the [pap] module.
Commented out due to the specification condition that pap was not used
in the pre-replacement environment.

Was that originally necessary to "correct" various passwords?

please tell me.

2019年8月13日(火) 11:57 Alan DeKok <[hidden email]>:

>
> On Aug 12, 2019, at 10:43 PM, Yuya Yanagi <[hidden email]> wrote:
> >
> > I understood the pointed out contents and deleted . I'm sorry for bothering you.
> > When you run it again, you will be told that there is no NT / LM
> > password. Where should I look next?
>
>   You edited the default configuration and broke it.  Don't do that.
>
>   You have a very complex configuration.  You've clearly built it without doing much in the way of testing.  That's wrong.
>
> > (6) ldap_regularusers: control:NT-Password :=
> > 0x4243353030433041363439353842434531393638383936303344464645343530
>
>   As I said earlier, that *is* the NT password.
>
> > (6) ldap_regularusers: control:User-Password :=
> > 'BC500C0A64958BCE196889603DFFE450'
> > (6) ldap_regularusers: control:Password-With-Header :=
> > '{SSHA256}Q1iLz8Pc/mkXU/hniRsu3/rpWKOVdjAU/4t2iLynZqdIPFIYPW0elA=='
> > rlm_ldap (ldap_regularusers): Released connection (0)
> > (6)           [ldap_regularusers] = updated
> > (6)         } # if (&outer.request:Called-Station-SSID == 'BLUE')   = updated
> > (6)       } # if (&outer.request:NAS-IP-Address =~
> > /^192\.168\.10\.1[2]{1}$/ || &outer.request:NAS-IP-Address ==
> > "192.168.200.240" || &outer.request:NAS-IP-Address == "localhost")  =
> > updated
> > (6)       [expiration] = noop
> > (6)       [logintime] = noop
> > (6)     } # authorize = updated
>
>   Note that there is no "pap" module.  The "pap" module is used in the default configuration.  It is placed last in the "authorize" section so that it can "fix" the various passwords.
>
>   Put the "pap" module back, as the last entry in the "authorize" section.
>
> > (6) mschap: WARNING: NT-Password has not been normalized by the 'pap'
> > module (likely still in hex format).  Authentication may fail
>
>   Again, that is pretty clear.  The "pap" module should be fixing the NT-Password.  Since you *deleted* the PAP module, it is NOT fixing the NT-Password.
>
>   The solution is to NOT delete the "pap" module.
>
>   It's hard to make these error messages any easier to understand.
>
>   Alan DeKok.
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html